Skip to content
Loading map…

GOLDEN BAKERY

1350 BEDFORD, BEDFORD · Food Establishment

11 inspections

  1. Inspection

    0 infractions

  2. Inspection

    2 infractions

    • 20(2) A washroom facility must be constructed, equipped, and designed in accordance with the Nova Scotia Building Code.
      • A tight-fitting door hinge must be installed on the staff washroom door.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • The storage trailer must be cleaned and any unused equipment removed. Food packaging materials must be stored in a clean and sanitary manner.
  3. Inspection

    5 infractions

    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • Door sweeps must be replaced and all holes in doors sealed to prevent rodent entry.
    • 20(2) A washroom facility must be constructed, equipped, and designed in accordance with the Nova Scotia Building Code.
      • A tight-fitting door hinge must be installed on the staff washroom door.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • Personal items, such as sweaters, must not be stored with food or food equipment. Personal belongings must be stored in a separate designated area.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • The storage trailer must be cleaned and any unused equipment removed. Food packaging materials must be stored in a clean and sanitary manner.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Mice droppings were found on the floor in the bakery section, packaging area, and near the rear exit door. All affected areas must be thoroughly cleaned and sanitized.
  4. Inspection

    12 infractions

    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • Door sweeps must be replaced and all holes in doors sealed to prevent rodent entry.
    • 20(2) A washroom facility must be constructed, equipped, and designed in accordance with the Nova Scotia Building Code.
      • A tight-fitting door hinge must be installed on the staff washroom door.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • Light bulbs must not be stored on shelves above food or food equipment. Broken light bulbs pose a risk of physical contamination.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • Raw frozen dough stored directly on the floor and used in the machine must be discarded. Storing dough on the floor presents a contamination risk and may contaminate the interior of the machine.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • Personal items, such as sweaters, must not be stored with food or food equipment. Personal belongings must be stored in a separate designated area.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • Raw beef and eggs must not be stored above ready-to-eat food products. These items may leak or drip, creating a risk of cross-contamination of foods that will not be cooked to the same internal temperature.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • Tools used for repairing bread machinery must be removed from the food processing area and stored in a designated area to prevent physical contamination of food products.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • All equipment must be cleaned and sanitized after each use. Equipment must not be left uncleaned for multiple days.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • All utensils stored on the two three-tier shelving racks were found with food debris. Utensils were required to be cleaned and sanitized prior to being returned to storage.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • The storage trailer must be cleaned and any unused equipment removed. Food packaging materials must be stored in a clean and sanitary manner.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Mice droppings were found on the floor in the bakery section, packaging area, and near the rear exit door. All affected areas must be thoroughly cleaned and sanitized.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Mice droppings were observed on a machine not currently in use. The machine must be cleaned and sanitized, and removed from the premises if it is no longer in use.
  5. Inspection

    0 infractions

  6. Inspection

    2 infractions

    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests. Fill in hole in door sweep
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must immediately remove any equipment, utensils and clutter not being used from the facility to maintain sanitary conditions.
  7. Inspection

    5 infractions

    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests. Install door sweep on exterior back door.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.4.1 of the NS Food Retail and Food Services Code, you must ensure floors have coved floor-to-wall joints. Install baseboards to prevent rodent entry.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must immediately remove any equipment, utensils and clutter not being used from the facility to maintain sanitary conditions.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.6 of the NS Food Retail and Food Services Code, you must store foods in food grade containers (plastic or glass) only. Ensure all dry good products are stored in food grade containers and scoop handles are stored in a sanitary manner.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.6 of the NS Food Retail and Food Services Code, you must store foods in food grade containers (plastic or glass) only. Discard any food grade containers that have mold.
  8. Inspection

    6 infractions

    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests. Install door sweep on exterior back door.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are kept in good repair. Re-surfaces all holes that are rodent entry points.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must immediately remove any equipment, utensils and clutter not being used from the facility to maintain sanitary conditions.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.6 of the NS Food Retail and Food Services Code, you must store foods in food grade containers (plastic or glass) only. Ensure all dry good products are stored in food grade containers and scoop handles are stored in a sanitary manner.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.6 of the NS Food Retail and Food Services Code, you must store foods in food grade containers (plastic or glass) only. Discard any food grade containers that have mold.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Ensure a daily and weekly cleaning schedule is in place. Print off a cleaning schedule and fill it in daily.
  9. Inspection

    7 infractions

    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests. Install door sweep on exterior back door.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are kept in good repair. Re-surfaces all holes that are rodent entry points.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • Operator must ensure pest control is carried out by a certified operator and a weekly inspection is completed until rodent issues resolve
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must immediately remove any equipment, utensils and clutter not being used from the facility to maintain sanitary conditions.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.6 of the NS Food Retail and Food Services Code, you must store foods in food grade containers (plastic or glass) only. Ensure all dry good products are stored in food grade containers and scoop handles are stored in a sanitary manner.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.6 of the NS Food Retail and Food Services Code, you must store foods in food grade containers (plastic or glass) only. Discard any food grade containers that have mold.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Ensure a daily and weekly cleaning schedule is in place. Print off a cleaning schedule and fill it in daily.
  10. Inspection

    1 infraction

    • 24(5) No person shall conceal, alter, deface or remove signage that has been placed or posted pursuant to clause 21(2)(c) or clause (3)(a).
      • Employee removed HPA closure sign on January 16th, 2025.
  11. Inspection

    8 infractions

    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests. Install door sweep on exterior back door.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are kept in good repair. Re-surfaces all holes that are rodent entry points.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • Operator must ensure pest control is carried out by a certified operator and a weekly inspection is completed until rodent issues resolve
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must immediately remove any equipment, utensils and clutter not being used from the facility to maintain sanitary conditions.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.6 of the NS Food Retail and Food Services Code, you must store foods in food grade containers (plastic or glass) only. Ensure all dry good products are stored in food grade containers and scoop handles are stored in a sanitary manner.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.6 of the NS Food Retail and Food Services Code, you must store foods in food grade containers (plastic or glass) only. Discard any food grade containers that have mold.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Ensure a daily and weekly cleaning schedule is in place.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • There was a massive amount of mice droppings found on food contact surfaces, storage bins, shelving, equipment and floors. All surfaces contaminated with droppings must be properly cleaned and sanitized using an approved sanitizer.