Skip to content
Loading map…

PARKSIDE PUB & GRILL

14 HIGHFIELD PARK, DARTMOUTH · Food Establishment

11 inspections

  1. Inspection

    0 infractions

  2. Inspection

    1 infraction

    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Flies observed by rear walk-in cooler, under potato sink area, and under/around dishwashing areas. Install sticky trap devices strategically and away from food handling areas. Ensure to keep flooring in these areas clean and dry (free of pooling water) to eliminate fly breeding sites. In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure:a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises.b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly.c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects.d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
  3. Inspection

    2 infractions

    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Flies observed by rear walk-in cooler, under potato sink area, and under/around dishwashing areas. Install sticky trap devices strategically and away from food handling areas. Ensure to keep flooring in these areas clean and dry (free of pooling water) to eliminate fly breeding sites. In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure:a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises.b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly.c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects.d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Provide the most recent Ecolab pest control report to your local Public Health Inspector. In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure: d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
  4. Inspection

    0 infractions

  5. Inspection

    3 infractions

    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Clean and sanitize the moldy glass washer grates. In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. In accordance with Section 4.2.3 of the NS Food Retail and Food Services Code, you must: a. ensure food contact surfaces of cooking equipment are cleaned and sanitized at a frequency that prevents the accumulation of grease deposits and other residues.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Flies observed by rear walk-in cooler, under potato sink area, and under/around dishwashing areas. Install sticky trap devices strategically and away from food handling areas. Ensure to keep flooring in these areas clean and dry (free of pooling water) to eliminate fly breeding sites. In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure:a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises.b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly.c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects.d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Provide the most recent Ecolab pest control report to your local Public Health Inspector. In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure: d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
  6. Inspection

    16 infractions

    • 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:  (c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
      • Seal / paint the rusty surfaces of cart located under microwave, as well as the rusty shelving inside the two door Pepsi cooler in the additional storage room. In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must ensure storage areas are constructed of materials which are durable and easily cleaned.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • Install door sweeps for the hot water heater, electrical, chemical, and additional storage room doors to close the bottom door gaps and prevent pest movement.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • Pest proofing of facility is required to prevent pest access and harborage. Several points of entry were observed in wall to floor junctures of the electrical room. In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests.
    • 19(2)(d) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator: (d) a wastewater system that meets the requirements of applicable legislation, regulations and municipal bylaws;
      • Service and close the open floor drain in the kitchen. This could be a source of fly harborage. In accordance with Section 2.11 of the NS Food Retail and Food Services Code, you must ensure sewage disposal systems meet all local and/or provincial requirements. In accordance with Section 2.15(f) of the NS Food Retail and Food Services Code, you must ensure all plumbing meets the applicable provisions of the provincial and/or local plumbing codes.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • Store oven trays and utensils that are seating on the floor behind cookline and under dishwashing areas off the floor. Food equipment must be handled and stored in sanitary manner. In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must: store all food and food items a minimum of 15 cm (6 in.) off the floor on racks, shelves or pallets; store all food and food items a minimum of 5 cm (2 in.) from the walls.
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • Fix the water leak in plumbing under dishwashing area. In accordance with Section 4.1 of the NS Food Retail and Food Services Code, you must ensure all equipment is maintained and functional for its intended use.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Deep cleaning of kitchen is required. Kitchen could use a paint job too. Grease and debris build-up observed, particularly around and under dishwashing areas with pooling water and debris. Clean and disinfect to prevent fly harbourage. Debris build-up behind, under, and around cookline equipment, along floor to wall joints and corners around cookline, behind table with Turbofan oven. Clean dirty walls surfaces around throughout food premises. Clean the dripping grease of the grease trays of hood. In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. Mold growth was observed in the walk-in cooler's ceiling and wall surfaces, as well as dust build-up on fan grill/guard. Egg shells, bones, grease and other food debris deposits observed in the kitchen and under equipment.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Develop a detailed written cleaning schedule for the facility and equipment (daily, weekly, monthly, etc.) In accordance with Section 4.2.1 of the NS Food Retail and Food Services Code, you must demonstrate that a written sanitation program is in place, which: a. Outlines the parameters to be controlled in the food premises to ensure safety of the food product.b. Includes sanitation procedures for equipment, utensils or refrigeration units that impact on food safety, which must specify:i. areas, items of equipment, and utensils to be cleaned;ii. the designated food handler(s) responsible for the cleaning and sanitizing;iii. the chemicals and/or cleaning products (including concentrations) and process to be used;iv. the procedures used;v. the frequency of cleaning and sanitizing; andvi. inspection and monitoring records.c. Documents that the sanitation program is monitored and its effectiveness verified.d. Reflects the level of risk of the food products as determined by the management plan required in Section 3.0 of this Code.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Mold and debris build-up observed in plastic wash and rinse curtains/arms of glass washer, as well as in hose lines behind bar counter. Clean and sanitize or replace. In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Rodent droppings were observed on the floor in hallway leading towards kitchen, between shelving rack with bulk dry goods and wall, on the floor between the dry goods storage in shelving rack and chest freezer, outside of rear walk-in cooler; under potato sink; on the floor under and around plastic shelving unit and stainless-steel table in the storage room with ice maker, on the floor in the chemical, hot water heater, and electrical rooms. Ensure hard to reach areas and all surfaces and areas affected by rodent droppings are properly cleaned and disinfected. In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. In accordance with Section 4.2.3 of the NS Food Retail and Food Services Code, you must: a. ensure food contact surfaces of cooking equipment are cleaned and sanitized at a frequency that prevents the accumulation of grease deposits and other residues.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Address issues identified by certified pest control company. In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure:a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises.b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly.c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects.d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Ensure pest traps and devices are emptied when loaded and cleaned regularly. Remove the trap with dead rodent in electrical room.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Flies observed by rear walk-in cooler and in dishwashing areas. Include flies to pest control service and eliminate fly harbourage areas. In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure: a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly. c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects. d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Increase pest control to bi-weekly service. Provide proof of updated service frequency to Public Health Inspector. In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure: a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly. c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects. d Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
    • 34 An operator must ensure that a food establishment is operated so that all food and food ingredients are processed, manufactured, handled, prepared, packaged, served, sold, offered for sale or distribution free of charge, dispensed, displayed and stored in a manner that prevents contamination and adulteration.
      • Large bag of potatoes with rodent droppings disposed of during inspection.
    • 9(a) An operator must renew a permit, other than a temporary permit, on or before the expiry date by submitting a completed renewal application to the Minister on a form approved by the Administrator together with all of the following: (a) the applicable fee prescribed in Section 5;
      • Food permit is expired. Renew food permit asap.
  7. Inspection

    12 infractions

    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure:a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises.b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly.c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects.d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods. Rodent droppings observed on the floor on the floor outside of rear walk-in cooler, on the floor between the dry goods storage in shelving rack and chest freezer, on the bottom shelf of stainless steel table (sauce station), on the floor of walk-in cooler diagonally across from office. Ensure hard to reach areas and all surfaces and areas affected by rodent droppings are properly cleaned and disinfected.
    • 34 An operator must ensure that a food establishment is operated so that all food and food ingredients are processed, manufactured, handled, prepared, packaged, served, sold, offered for sale or distribution free of charge, dispensed, displayed and stored in a manner that prevents contamination and adulteration.
      • Ice storage in bar sink mixed with several hose lines observed with mold growth and debris build-up. Store ice in a sanitary manner to protect from contamination.
    • 49(1)(a) An operator must ensure that food ingredients and food packaging materials must be stored in a dry storage room or designated area that a) protects the food ingredient or food packaging material from contamination;
      • In accordance with Section 2.9 of the Nova Scotia Food Retail and Food Services Code, you must ensure that the facilities used for the storage of food, food ingredients, equipment and non-food materials such as utensils, linens, single-service and single-use utensils, and packaging must be designed and constructed so that they: ii. are located in a clean and dry location; iii. restrict pest access and harbourage; In accordance with Section 2.9 of the Nova Scotia Food Retail and Food Services Code, you must ensure stored items are protected from contamination such as water leakage, pest infestation or any other unsanitary condition by storing and handling food packaging containers in a sanitary manner. Store food packaging materials in clean, suitably covered containers or be sealed and securely closed.
    • 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:  (c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
      • In accordance with Section 2.4.2 of the NS Food Retail and Food Services Code, you must ensure all floors are durable, easily cleanable and non-slip. Fix or replace broken flooring tiles under and around dishwashing area with materials that are impervious to moisture, easy to clean, non-slip, durable.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • Wall in disrepair next to ice maker machine in additional storage room. Wall hole in chemical room where pipes come through wall. In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are kept in good repair.
    • 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator: (b) adequately designed and appropriately located hand-washing facilities;
      • In accordance with Section 2.14 of the NS Food Retail and Food Services Code, you must provide at least one hand washing station in each food preparation area. Handwashing sink at the server's station observed to be blocked by a container resting on sink and sink filled with ice. Handwashing sink in kitchen observed to be clogged. Handwashing stations must readily available and accessible for food handler's use at all times. Do not block handwashing sinks and do not use these designated handwashing sinks for dumping. Hand washing stations must be use for hand hygiene purposes only. Kitchen handwashing sink requires maintenance to ensure it is able to adequately drain.
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1 of the NS Food Retail and Food Services Code, you must ensure all equipment is maintained and functional for its intended use. Chest freezer door in disrepair (broken) in the additional storage room with ice maker. This room was not disclosed to the Public Health Officer during inspection.
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • Two door Pepsi cooler observed with rusted shelving in additional storage room with ice machine. Properly seal shelving with materials that are smooth, impervious to moisture, and easy to clean.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.1 of the NS Food Retail and Food Services Code, you must demonstrate that a written sanitation program is in place, which: a. Outlines the parameters to be controlled in the food premises to ensure safety of the food product. b. Includes sanitation procedures for equipment, utensils or refrigeration units that impact on food safety, which must specify: i. areas, items of equipment, and utensils to be cleaned; ii. the designated food handler(s) responsible for the cleaning and sanitizing; iii. the chemicals and/or cleaning products (including concentrations) and process to be used; iv. the procedures used; v. the frequency of cleaning and sanitizing; and vi. inspection and monitoring records. c. Documents that the sanitation program is monitored and its effectiveness verified. d. Reflects the level of risk of the food products as determined by the management plan required in Section 3.0 of this Code. Develop a written cleaning schedule for the facility and equipment.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. Mold and debris build-up observed in plastic wash and rinse curtains/arms of glass washer, as well as in hose lines behind bar counter. Clean and sanitize or replace.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. Mold growth was observed in the walk-in cooler's ceiling and wall surfaces, as well as dust build-up on fan grill/guard. Egg shells, bones, grease and other food debris deposits observed in the kitchen and under equipment. Deep cleaning of kitchen and equipment is required, particularly around and under dishwashing areas and equipment, around and under cookline equipment, around back door exit towards smoker room, and of walk-in cooler unit.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure: a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly. c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects. d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods. Address issues identified by certified pest control company.
  8. Inspection

    11 infractions

    • 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:  (c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
      • In accordance with Section 2.4.2 of the NS Food Retail and Food Services Code, you must ensure all floors are durable, easily cleanable and non-slip. In accordance with Section 4.6 of the NS Food Retail and Food Services Code, you must ensure all surfaces such as floors, walls and ceilings are cleaned at a frequency that will prevent accumulation of dust, dirt and debris. Fix / replace broken / damaged flooring tiles with pooling water in the dishwasher area.
    • 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator: (b) adequately designed and appropriately located hand-washing facilities;
      • In accordance with Section 2.14 of the NS Food Retail and Food Services Code, you must provide at least one hand washing station in each food preparation area. Handwashing sink at the server's station observed to be blocked by a container resting on sink and sink filled with ice. Handwashing sink in kitchen observed to be clogged. Handwashing stations must readily available and accessible for food handler's use at all times. Do not block handwashing sinks and do not use these designated handwashing sinks for dumping. Hand washing stations must be use for hand hygiene purposes only. Kitchen handwashing sink requires maintenance to ensure it is able to adequately drain.
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1 of the NS Food Retail and Food Services Code, you must ensure all equipment is maintained and functional for its intended use. Repair / replace spray sink with leak (welding).
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1 of the NS Food Retail and Food Services Code, you must ensure all equipment is maintained and functional for its intended use. No sanitizer measured in glass washer at the bar. Sanitizer bottle available. Glass washer requires maintenance to ensure there is enough sanitizer during sanitizing cycle. Ensure to put bar glassware through kitchen dishwasher to ensure glassware is properly sanitized before use until the glass washer has been fixed.
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1.8 of the NS Food Retail and Food Services Code, you must ensure a maintenance schedule is present for the exhaust hood ventilation system. Overhead canopy with grease build-up and grease drips along hood frame. Hood requires cleaning.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. Mold growth was observed in the walk-in cooler's ceiling and wall surfaces, as well as dust build-up on fan grill/guard. Egg shells, bones, grease and other food debris deposits observed in the kitchen and under equipment. Deep cleaning of kitchen and equipment is required, particularly around and under dishwashing areas and equipment, around and under cookline equipment, around back door exit towards smoker room, and of walk-in cooler unit.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure:a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises.b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly.c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects.d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods. Rodent droppings observed on the floor on the floor outside of rear walk-in cooler, on the floor between the dry goods storage in shelving rack and chest freezer, on the bottom shelf of stainless steel table (sauce station), on the floor of walk-in cooler diagonally across from office. Ensure hard to reach areas and all surfaces and areas affected by rodent droppings are properly cleaned and disinfected.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Several live fruit flies were observed in bar area. In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure: a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly. c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects. d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
    • 33(1) An operator must ensure that the temperature of food is controlled so that the food does not deteriorate or become inedible or unsafe.
      • In accordance with Section 3.3.2 of the Nova Scotia Food Services and Food Retail Code, you must thaw foods appropriately. Bags of partially frozen chicken wings observed thawing at room temperature on top of chest freezer and on a tray rack. Chicken wings moved to working cooler immediately. Discussed proper thawing methods: under cold running water or submerged in water; in the cooler; in the microwave (only for defrosting meat that will be cooked right away).
    • 34 An operator must ensure that a food establishment is operated so that all food and food ingredients are processed, manufactured, handled, prepared, packaged, served, sold, offered for sale or distribution free of charge, dispensed, displayed and stored in a manner that prevents contamination and adulteration.
      • Utensil observed handle down in dry goods container. Remove utensil from bulk product. Utensils must be handled and store in a sanitary manner to protect food from contamination. Blue cheese sauce/dressing seating at room temp for several hours. Disposed of on site.
    • 49(1)(a) An operator must ensure that food ingredients and food packaging materials must be stored in a dry storage room or designated area that a) protects the food ingredient or food packaging material from contamination;
      • In-use single service utensils were observed to be surrounded by and exposed to rodent droppings on bottom shelving of sauce station. Disposed of packaging affected by rodent droppings. In accordance with Section 2.9 of the Nova Scotia Food Retail and Food Services Code, you must ensure stored items are protected from contamination such as water leakage, pest infestation or any other unsanitary condition by:storing food packaging materials in clean, suitably covered containers or be sealed and securely closed. In accordance with Section 2.9 of the Nova Scotia Food Retail and Food Services Code, you must ensure that the facilities used for the storage of food, food ingredients, equipment and non-food materials such as utensils, linens, single-service and single-use utensils, and packaging must be designed and constructed so that they: ii. are located in a clean and dry location; iii. restrict pest access and harbourage;
  9. Inspection

    0 infractions

  10. Inspection

    3 infractions

    • 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator: (b) adequately designed and appropriately located hand-washing facilities;
      • In accordance with Section 2.14 of the NS Food Retail and Food Services Code, you must provide at least one hand washing station in each food preparation area. Ensure handwashing sink in dishwashing area is repaired.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.5 of the NS Food Retail and Food Services Code, you must keep all foods covered when not in use. Ensure cutting board in disrepair on sandwich cooler is replaced.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. Ensure cleaning is completed around cooking equipment and in dishwashing area.
  11. Inspection

    3 infractions

    • 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator: (b) adequately designed and appropriately located hand-washing facilities;
      • In accordance with Section 2.14 of the NS Food Retail and Food Services Code, you must provide at least one hand washing station in each food preparation area. Ensure handwashing sink in dishwashing area is repaired.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.5 of the NS Food Retail and Food Services Code, you must keep all foods covered when not in use. Ensure cutting board in disrepair on sandwich cooler is replaced.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. Ensure cleaning is completed around cooking equipment and in dishwashing area.