PIZZA DELIC
3290 HIGHWAY 2, FALL RIVER · Food Establishment
8 inspections
- Inspection
3 infractions
- 28(1) An operator must successfully complete a food hygiene training program and provide proof of this to the Administrator upon request.
- In accordance with Section 6.3.3 of the NS Food Retail and Food Services Code, you must provide verification of completion of a valid, recognized food hygiene course to the Department.
- 29(3) A food establishment must provide facilities and equipment to implement the maintenance, cleaning and sanitation program and must identify in their program the cleaning and sanitizing agents used in the food establishment, including their concentration and uses.
- Bleach sanitizer in spray bottle measured too strong. It was diluted to 100 ppm at the time of inspection. Instructions were provided to operator. In accordance with Section 4.2.1(b) of the NS Food Retail and Food Services Code, you must identify all cleaning and sanitizing agents used in the Food Establishment and their concentrations.
- 37(1) If directed by an inspector, a food establishment must maintain records that demonstrate the quality assurance system used to ensure food safety in the processing or preparation of a food.
- In accordance with Section 3.1.4 of the Nova Scotia Food Services and Food Retail Code, you must maintain records that demonstrate your Quality Assurance (Management) System, including the following: Temperatures must be recorded for all cooling equipment on a daily basis and records must be kept on site.
- 28(1) An operator must successfully complete a food hygiene training program and provide proof of this to the Administrator upon request.
- Inspection
2 infractions
- 9(a) An operator must renew a permit, other than a temporary permit, on or before the expiry date by submitting a completed renewal application to the Minister on a form approved by the Administrator together with all of the following:
(a) the applicable fee prescribed in Section 5;
- Food Establishment Permit expired on September 09, 2025. Renew permit in next five business days.
- 9(a) An operator must renew a permit, other than a temporary permit, on or before the expiry date by submitting a completed renewal application to the Minister on a form approved by the Administrator together with all of the following: (a) the applicable fee prescribed in Section 5;
- 9(a) An operator must renew a permit, other than a temporary permit, on or before the expiry date by submitting a completed renewal application to the Minister on a form approved by the Administrator together with all of the following:
(a) the applicable fee prescribed in Section 5;
- Inspection
1 infraction
- 9(a) An operator must renew a permit, other than a temporary permit, on or before the expiry date by submitting a completed renewal application to the Minister on a form approved by the Administrator together with all of the following:
(a) the applicable fee prescribed in Section 5;
- Food Establishment Permit expired on September 09, 2025. Renew permit in next five business days.
- 9(a) An operator must renew a permit, other than a temporary permit, on or before the expiry date by submitting a completed renewal application to the Minister on a form approved by the Administrator together with all of the following:
(a) the applicable fee prescribed in Section 5;
- Inspection
0 infractions
- Inspection
1 infraction
- 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
- Pending deficiencies noted on most recent report from pest control provider. Operator must comply with all directions provided by the pest control company. Operator must provide most recent pest control service report indicating all pending tasks directed by pest control provider have been completed.
- 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
- Inspection
3 infractions
- 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
- Pending deficiencies noted on most recent report from pest control provider. Operator must comply with all directions provided by the pest control company.
- 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
- There is a gap between walls and floor joints in the area behind the stainless steel counter across the 3 compartment sink. Install baseboards to fill the gap. Observed two holes on the door frame of back door. Fill the holes to prevent entry by pests. In accordance with Section 2.4.1 of the NS Food Retail and Food Services Code, you must ensure floors have coved floor-to-wall joints. In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests.
- 29(1) An operator of a food establishment must have a maintenance, cleaning and sanitation program in place to control the risk of contamination of food, equipment, utensils and other facilities in the food establishment.
- In accordance with Section 4.2.1 of the NS Food Retail and Food Services Code, you must demonstrate that a written sanitation program is in place, which: a. Outlines the parameters to be controlled in the food premises to ensure safety of the food product. b. Includes sanitation procedures for equipment, utensils or refrigeration units that impact on food safety, which must specify: i. areas, items of equipment, and utensils to be cleaned; ii. the designated food handler(s) responsible for the cleaning and sanitizing; iii. the chemicals and/or cleaning products (including concentrations) and process to be used; iv. the procedures used; v. the frequency of cleaning and sanitizing; and vi. inspection and monitoring records. c. Documents that the sanitation program is monitored and its effectiveness verified. d. Reflects the level of risk of the food products as determined by the management plan required in Section 3.0 of this Code.
- 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
- Inspection
6 infractions
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- 1. Floor tiles missing in the back area near back door, under and around three compartment sink. Install the missing tiles so that floor is durable and easily cleanable. 2. There is a gap between walls and floor in the area behind the stainless steel counter across the 3 compartment sink. 3. Missing ceiling tiles from two spots in the front area. Install missing ceiling tiles.
- 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
- Pending deficiencies noted on most recent report from pest control provider. Operator must comply with all directions provided by the pest control company.
- 29(1) An operator of a food establishment must have a maintenance, cleaning and sanitation program in place to control the risk of contamination of food, equipment, utensils and other facilities in the food establishment.
- In accordance with Section 4.2.1 of the NS Food Retail and Food Services Code, you must demonstrate that a written sanitation program is in place, which: a. Outlines the parameters to be controlled in the food premises to ensure safety of the food product. b. Includes sanitation procedures for equipment, utensils or refrigeration units that impact on food safety, which must specify: i. areas, items of equipment, and utensils to be cleaned; ii. the designated food handler(s) responsible for the cleaning and sanitizing; iii. the chemicals and/or cleaning products (including concentrations) and process to be used; iv. the procedures used; v. the frequency of cleaning and sanitizing; and vi. inspection and monitoring records. c. Documents that the sanitation program is monitored and its effectiveness verified. d. Reflects the level of risk of the food products as determined by the management plan required in Section 3.0 of this Code.
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;
- Observed dirt and grease buildup under the grill. It must be cleaned. Non-food contact surfaces must be cleaned at a frequency to avoid buildup of dirt and grease buildup.
- 33(2) The operator must ensure that all refrigeration and heat-holding equipment has a temperature measuring device that is accurate and in good repair.
- No probe thermometer available. Obtain a probe thermometer with the ability to measure hot and cold temperatures so that food safety temperatures of potentially hazardous foods can be verified.
- 37(1) If directed by an inspector, a food establishment must maintain records that demonstrate the quality assurance system used to ensure food safety in the processing or preparation of a food.
- In accordance with Section 3.1.4 of the Nova Scotia Food Services and Food Retail Code, you must maintain records that demonstrate your Quality Assurance (Management) System, including the following: Temperature logs for all cooling equipment.
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- Inspection
0 infractions