Skip to content
Loading map…

TORTA BOYZ

354 PRESTON STREET OTTAWA ON K1S 3J2 · Food Safety

4 inspections

  1. Routine inspection

    5 infractions

    • The surfaces of equipment and facilities other than utensils that come in direct contact with food are cleaned and sanitized as often as necessary to maintain such surfaces in a sanitary condition.
      • Clean and sanitize the surfaces of equipment and facilities as often as necessary to maintain such surfaces in a sanitary conditions.
    • Every food premise ensures that sanitary facilities are maintained in accordance with the design, construction and installation requirements in Ontario Regulation 332/12, is properly equipped and in good repair.
      • Equip every sanitary facility with a supply of soap or detergent.
    • Utensils shall be sanitized through the use of an approved chemical solution or hot water for the required contact time and temperature.
      • Sanitize utensils through the use of clean water at a temperature of at least 77°C, or more, for at least 45 seconds.
      • Sanitize utensils in a clean quaternary ammonium solution of not less than 200 parts per million at a temperature not lower than 24°C for at least 45 seconds.
    • Mechanical dishwashers are constructed, designed and maintained to provide clean wash water at the proper temperature, and a sanitizing rinse.
    • Operators of a food premise shall ensure that food handlers in the food premise practice good personal hygiene.
      • Food handlers shall take reasonable precautions to ensure that food is not contaminated by hair.
  2. Follow-up inspection

    1 infraction

    • Food processed in a manner that makes the food safe to eat.
      • Process all food in a manner that makes the food safe to eat
  3. Follow-up inspection

    5 infractions

    • The food premise is protected against the entry of pests and kept free of conditions that lead to the harbouring or breeding of pests.
    • Equipment and utensils that come into direct contact with food are corrosion-resistant, non-toxic and free from cracks, crevices and open seams.
      • Equipment and utensils that come into direct contact with food must be free from cracks, crevices and open seams.
    • The equipment used for refrigeration or hot-holding of potentially hazardous foods contains accurate indicating thermometers that can be easily read.
      • Provide refrigeration units with accurate indicating thermometers that may be easily read.
    • Every food premise shall be provided with employee hand washing stations.
      • Provide an adequate number of hand washing stations that are maintained and kept adequately supplied and that are situated for convenient access by food handlers.
      • The hand washing stations must be used only for the hand washing of employees.
    • A person giving notice of an intention to commence to operate a food premise to the medical officer of health under subsection 16(2) of the Health Protection and Promotion Act shall include his or her name, contact information and the location of the food premise in the notice.
  4. Routine inspection

    8 infractions

    • Food processed in a manner that makes the food safe to eat.
    • Multi-service utensils shall be cleaned and sanitized after each use.
      • Clean and sanitize utensils other than multi-service articles as often as necessary to maintain them in a clean and sanitary condition.
    • The levels of illumination required are maintained in the food premise during all hours of operation.
      • Maintain the levels of illumination required under Ontario Regulation 332/12 (Building Code) during all hours of operation.
    • A person giving notice of an intention to commence to operate a food premise to the medical officer of health under subsection 16(2) of the Health Protection and Promotion Act shall include his or her name, contact information and the location of the food premise in the notice.
    • Equipment and utensils that come into direct contact with food are corrosion-resistant, non-toxic and free from cracks, crevices and open seams.
      • Equipment and utensils that come into direct contact with food must be free from cracks, crevices and open seams.
    • The equipment used for refrigeration or hot-holding of potentially hazardous foods contains accurate indicating thermometers that can be easily read.
      • Provide refrigeration units with accurate indicating thermometers that may be easily read.
    • The food premise is protected against the entry of pests and kept free of conditions that lead to the harbouring or breeding of pests.
      • Protect the food premise against the entry of pests.
    • Every food premise shall be provided with employee hand washing stations.