Yarmouth Superstore #372
104 STARRS, YARMOUTH · Food Establishment
10 inspections
- Inspection
1 infraction
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;
- Ensure that each food preparation area/food packaging area is stocked with ready-to-use sanitizer such as quats in a spray bottle at 200ppm, and that staff are sanitizing food contact surfaces such as counters after every 4 hours or as needed (such as after cleaning).
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;
- Inspection
0 infractions
- Inspection
2 infractions
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are constructed of finishes which are smooth, impermeable, and washable. In accordance with Section 2.4.2 of the NS Food Retail and Food Services Code, you must ensure all floors are durable, easily cleanable and non-slip. Replace/replace broken floor trim tile in meat prep area, and install a guard to prevent future breaks from pallets.
- 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator:
(b) adequately designed and appropriately located hand-washing facilities;
- In accordance with Section 2.14 of the NS Food Retail and Food Services Code, you must provide at least one hand washing station in each food preparation area. Handwashing stations must be equipped with fully functional paper towel dispensers. Replace the broken paper towel dispenser in meat processing area. Stock the handwashing sink in the raw chicken cooler.
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- Inspection
1 infraction
- 23(2)(b) Equipment used to cook, heat-treat, cool, store, display or freeze food must be designed to
(b) control temperature, humidity, air flow and any other condition that is likely to have a detrimental effect on food safety.
- Repair and/or increase maintenance on the following walk-in freezer doors so that they seal properly when shut and do not form excessive ice around them: - Sliding bakery freezer door - Sliding dairy/ice cream freezer door - Sliding meat freezer door
- 23(2)(b) Equipment used to cook, heat-treat, cool, store, display or freeze food must be designed to
(b) control temperature, humidity, air flow and any other condition that is likely to have a detrimental effect on food safety.
- Inspection
0 infractions
- Inspection
1 infraction
- 23(2)(b) Equipment used to cook, heat-treat, cool, store, display or freeze food must be designed to
(b) control temperature, humidity, air flow and any other condition that is likely to have a detrimental effect on food safety.
- Repair or replace the following walk-in freezer doors so that they seal properly when shut and do not form excessive ice around them: - Swinging fish freezer door - Sliding bakery freezer door - Sliding dairy/ice cream freezer door - Sliding meat freezer door
- 23(2)(b) Equipment used to cook, heat-treat, cool, store, display or freeze food must be designed to
(b) control temperature, humidity, air flow and any other condition that is likely to have a detrimental effect on food safety.
- Inspection
1 infraction
- 19(1)(a) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(a) that the risk of contaminating the food is minimized;
- In accordance with Section 2.3 and Section 2.4.2 of the NS Food Retail and Food Services Code, you must keep all floors, walls and ceilings in food preparation, processing and storage areas in good repair. Replace the water damaged ceiling tile in the bakery.
- 19(1)(a) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(a) that the risk of contaminating the food is minimized;
- Inspection
1 infraction
- 23(2)(b) Equipment used to cook, heat-treat, cool, store, display or freeze food must be designed to
(b) control temperature, humidity, air flow and any other condition that is likely to have a detrimental effect on food safety.
- Repair or replace the following walk-in freezer doors so that they seal properly when shut and do not form excessive ice around them: - Swinging fish freezer door - Sliding bakery freezer door - Sliding dairy/ice cream freezer door - Sliding meat freezer door
- 23(2)(b) Equipment used to cook, heat-treat, cool, store, display or freeze food must be designed to
(b) control temperature, humidity, air flow and any other condition that is likely to have a detrimental effect on food safety.
- Inspection
4 infractions
- 19(1)(a) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(a) that the risk of contaminating the food is minimized;
- In accordance with Section 2.3 and Section 2.4.2 of the NS Food Retail and Food Services Code, you must keep all floors, walls and ceilings in food preparation, processing and storage areas in good repair. Replace the water damaged ceiling tile in the bakery.
- 23(2)(b) Equipment used to cook, heat-treat, cool, store, display or freeze food must be designed to
(b) control temperature, humidity, air flow and any other condition that is likely to have a detrimental effect on food safety.
- Ensure that equipment used to store potentially hazardous foods is adjusted to minimize the risk to food safety. Temperature control issues identified in sandwich display unit, soda/milk display unit, and ready-to-eat meat display unit. Monitor the temperature of the units throughout the day and make adjustments to defrost cycle, set temperature, and layout of food as needed to ensure that time spent in the danger zone during defrost cycle is minimized. Ensure that staff measure temperature of foods stored near the front, where they will be warmest. Do not use the units to display food until the necessary adjustments have been made. Temperature control issues also identified on the olive cart. Do not use the unit until the wells are confirmed to store food at 4C or less. Lids on the wells may be required to maintain a safe temperature. Ensure staff measure the temperature of the food when taking logs.
- 29(1) An operator of a food establishment must have a maintenance, cleaning and sanitation program in place to control the risk of contamination of food, equipment, utensils and other facilities in the food establishment.
- Additional cleaning needed by the handwash and dishwashing sinks in the rotisserie area. Additional cleaning needed on the ceiling of the walk-in produce cooler.
- 33(1) An operator must ensure that the temperature of food is controlled so that the food does not deteriorate or become inedible or unsafe.
- In accordance with Section 3.3.3 of the Nova Scotia Food Services and Food Retail Code, you must store potentially hazardous foods at a temperature of 4 degrees Celsius or less. Temperature abused foods discarded during inspection. Ensure that staff measure the temperature of the foods when taking temperature logs.
- 19(1)(a) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(a) that the risk of contaminating the food is minimized;
- Inspection
1 infraction
- 23(2)(b) Equipment used to cook, heat-treat, cool, store, display or freeze food must be designed to
(b) control temperature, humidity, air flow and any other condition that is likely to have a detrimental effect on food safety.
- Repair the doors to the seafood and back storage area walk-in freezers so that they seal properly. Repair the rubber trim on the swinging doors to the meat and produce walk-in fridges so that they do not have large air gaps.
- 23(2)(b) Equipment used to cook, heat-treat, cool, store, display or freeze food must be designed to
(b) control temperature, humidity, air flow and any other condition that is likely to have a detrimental effect on food safety.