Aspens Whirlpool #1 (Slopeside Large)
4800 Spearhead Dr, Whistler BC V8E 1G1 · Hot Tub
Inspection summary
Aspens Whirlpool #1 (Slopeside Large) has been inspected 34 times by Vancouver Coastal Health since October 15, 2015. The most recent inspection, on June 2, 2026, recorded 3 infractions.
6 of 34 inspections on record found no infractions at all. In the past 12 months there was 1 inspection with 3 infractions recorded. The higher-risk findings here relate to: Pool and spa water quality, Chemicals and toxic substances and Food temperature control.
The number of infractions per inspection has stayed roughly the same over time.
What these findings mean
Health authorities word their findings differently, so we group them by what they mean for the people using the facility. Higher-risk findings are the ones that could directly cause illness or injury, such as water that is not properly treated.
Pool and spa water qualityHigher risk
For pools, spas and splash pads, inspectors test disinfectant levels, pH and water clarity, and check safety equipment. Water that is not properly treated can spread skin, ear and stomach infections.
Recorded 40 times across 22 separate inspections, most recently on June 2, 2026. For example:
Pool water velocity and recirculation rate is properly maintained
Chemicals and toxic substancesHigher risk
Pool chemicals such as chlorine and acid must be labelled, stored apart from each other and handled safely. Mixing them by mistake can release toxic gas, so storage and handling problems are treated seriously.
Recorded 2 times across 2 separate inspections, most recently on September 26, 2019. For example:
Chemicals are stored in a safe manner and location
Food temperature controlHigher risk
Inspectors check that anything that has to be kept at a set temperature, such as chilled or hot food, or equipment like sterilizers, stays in its safe range and that accurate thermometers are on hand. With food, temperature problems are one of the most common causes of food poisoning.
Recorded once on July 26, 2023. For example:
The pool water temperature is properly maintained
Equipment and utensilsLower risk
Pumps, filters, chemical feeders and safety equipment such as lifebuoys, reaching poles and first-aid kits must be present and working. Missing safety equipment can matter a great deal in an emergency.
Recorded 17 times across 17 separate inspections, most recently on June 2, 2026. For example:
Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
Other findingsLower risk
Findings that do not fit the categories above, such as follow-ups that confirm an earlier violation was corrected, or requirements specific to this type of facility.
Recorded 2 times across 2 separate inspections, most recently on September 26, 2019. For example:
The hot tub enclosure has a clock and instructions for safe use of the hot tub, in clear view
About this data
These results come from Vancouver Coastal Health, which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.
34 inspections
- Routine
3 infractions
- Pool water velocity and recirculation rate is properly maintained
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Daily pool records are adequately maintained and available on site
- Results of water testing are inadequately recorded.
- Routine
2 infractions
- Pool water velocity and recirculation rate is properly maintained
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Flow meter is not functioning correctly
- Routine
0 infractions
- Routine Follow-up
2 infractions
- Pool water velocity and recirculation rate is properly maintained
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Flow meter is not functioning correctly
- Routine
3 infractions
- Pool water velocity and recirculation rate is properly maintained
- The pool has controlled access
- Pool security fencing with a self-closing gate is lacking or inadequate
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Flow meter is not functioning correctly
- Routine
0 infractions
- Routine Follow-up
1 infraction
- Pool water velocity and recirculation rate is properly maintained
- Routine
3 infractions
- The pool water temperature is properly maintained
- The hot tub temperature is in excess of 40°C
- Pool water velocity and recirculation rate is properly maintained
- The pool water is not being recirculated at the design flow rate.
- Adequate safety equipment is provided
- Pool is not equipped with a throwing ring and/or the rope for the ring is not at least ½ the width of the pool plus 3 metres (N/A for pools < 10m²)
- The pool water temperature is properly maintained
- Routine Follow-up
1 infraction
- The pool alkalinity is properly maintained
- Alkalinity is not between 80 ppm and 120 ppm
- The pool alkalinity is properly maintained
- Routine
2 infractions
- The pool does not present any suction or entrapment hazards to pool patrons
- The operator maintains the pool in good repair.
- Routine Follow-up
0 infractions
- Routine
3 infractions
- Pool water velocity and recirculation rate is properly maintained
- The pool does not present any suction or entrapment hazards to pool patrons
- The operator maintains the pool in good repair.
- Routine
1 infraction
- Adequate safety equipment is provided
- Request
0 infractions
- Routine
2 infractions
- The Permit to Operate a pool is valid and is posted in a prominent location.
- The pool is kept in good repair by an appropriately trained person.
- Request Follow-up
0 infractions
- Routine Follow-up
0 infractions
- Routine
4 infractions
- The Permit to Operate a pool is valid and is posted in a prominent location.
- Permit to Operate is not posted in a prominent location.
- Pool rules are posted prominently within the pool enclosure
- Safety rules sign missing, incomplete, or not clearly visible to the public
- The operator maintains the pool in good repair.
- Daily pool records are adequately maintained and available on site
- The Permit to Operate a pool is valid and is posted in a prominent location.
- Routine
6 infractions
- Pool water velocity and recirculation rate is properly maintained
- The pool water is not being recirculated at the design flow rate.
- The hot tub enclosure has a clock and instructions for safe use of the hot tub, in clear view
- Clock prominently displaying the time is not present or in clear view
- Chemicals are stored in a safe manner and location
- Chemicals are stored directly on the floor.
- The operator maintains the pool in good repair.
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Flow meter is not functioning correctly
- Daily pool records are adequately maintained and available on site
- Results of water testing are inadequately recorded.
- Pool water velocity and recirculation rate is properly maintained
- Routine
1 infraction
- Pool water velocity and recirculation rate is properly maintained
- The pool water is not being recirculated at the design flow rate.
- Pool water velocity and recirculation rate is properly maintained
- Routine Follow-up
2 infractions
- The pool pH level is properly maintained
- pH level is not within 7.2 and 7.8
- The pool alkalinity is properly maintained
- Alkalinity is not between 80 ppm and 120 ppm
- The pool pH level is properly maintained
- Routine
2 infractions
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Chemicals are stored in a safe manner and location
- Routine Follow-up
2 infractions
- The pool cyanuric acid stabilizer level is properly maintained
- The cyanuric acid stabilizer level is greater than 80 ppm
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Flow meter is not functioning correctly
- The pool cyanuric acid stabilizer level is properly maintained
- Routine Follow-up
1 infraction
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Flow meter is not functioning correctly
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Routine
6 infractions
- The pool pH level is properly maintained
- pH level is not within 7.2 and 7.8
- The pool alkalinity is properly maintained
- Alkalinity is not between 80 ppm and 120 ppm
- The pool disinfectant is properly maintained
- Chlorine Cyanurate is less than 2.0 ppm at temperature > 30°C
- The pool cyanuric acid stabilizer level is properly maintained
- The cyanuric acid stabilizer level is greater than 80 ppm
- An operator of a pool has prepared, maintains, and follows a written pool safety plan to ensure the health and safety of pool patrons
- Procedures in the pool safety plan are not being followed.
- Daily pool records are adequately maintained and available on site
- Results of daily water testing is inadequately recorded: Free Available Chlorine, Combined Available Chlorine and pH is tested and recorded at least twice daily; Alkalinity and Cyanuric Acid is tested and recorded at least weekly.
- Injuries sustained at or within the pool is inadequately recorded
- Occurrences of contamination by feces or vomit at or within the pool is inadequately recorded
- The amount and types of chemicals added to the pool water is inadequately recorded
- The pool pH level is properly maintained
- Routine
1 infraction
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- The pool chemical test kit is absent/not in good condition and/or cannot produce accurate readings for required chemical parameters.
- Flow meter is not functioning correctly
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Routine
1 infraction
- The pool is regularly maintained and kept in good repair by an appropriately trained person
- Routine
1 infraction
- The pool has controlled access
- Pool security fencing with a self-closing gate is lacking or inadequate
- The pool has controlled access
- Routine Follow-up
1 infraction
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Routine
3 infractions
- The hot tub enclosure has a clock and instructions for safe use of the hot tub, in clear view
- Clock prominently displaying the time is not present or in clear view
- The pool is regularly maintained and kept in good repair by an appropriately trained person
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Flow meter is not functioning correctly
- The hot tub enclosure has a clock and instructions for safe use of the hot tub, in clear view
- Routine
1 infraction
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Flow meter is not functioning correctly
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Routine
3 infractions
- The pool alkalinity is properly maintained
- Alkalinity is not between 80 ppm and 120 ppm
- The pool disinfectant is properly maintained
- Free available chlorine is in excess of 10 ppm.
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- The pool chemical test kit is absent/not in good condition and/or cannot produce accurate readings for required chemical parameters.
- The pool alkalinity is properly maintained
- Routine Follow-up
2 infractions
- The pool is regularly maintained and kept in good repair by an appropriately trained person
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- Routine
2 infractions
- The pool alkalinity is properly maintained
- Alkalinity is not between 80 ppm and 120 ppm
- Pool equipment is regularly tested for safety and maintained in accordance with the manufacturers' specifications
- The pool alkalinity is properly maintained
Nearby inspected facilities
- Aspens Whirlpool #3 (Spa Next to Pool)
4800 Spearhead Dr, Whistler BC V8E 1G1
37 inspections
- Aspens Whirlpool #2 (Slopeside Small)
4800 Spearhead Dr, Whistler BC V8E 1G1
34 inspections
- Aspens Swimming Pool
4800 Spearhead Dr, Whistler BC V8E 1G1
43 inspections
- Greystone Lodge Whirlpool - Outdoor Oval
4905 Spearhead Pl, Whistler BC V0N 1B0
14 inspections
- Greystone Lodge Swimming Pool
4905 Spearhead Pl, Whistler BC V0N 1B0
26 inspections
- Greystone Lodge Whirlpool - Indoor
4905 Spearhead Pl, Whistler BC V0N 1B0
21 inspections
- Woodrun Lodge Swimming Pool
4910 Spearhead Pl, Whistler BC V8E 1G1
35 inspections
- Woodrun Lodge Whirlpool
4910 Spearhead Pl, Whistler BC V8E 1G1
37 inspections