Skip to content
Loading map…

AYR FUEL STOP

#1202 Northumberland St, North Dumfries ON N0B 1E0 · Facility

Official record from Waterloo Region →

Inspection summary

AYR FUEL STOP has been inspected 2 times by Region of Waterloo Public Health since April 18, 2024. The most recent inspection, on June 6, 2024, recorded 3 infractions.

None of the 2 inspections on record were free of infractions. No inspections are on record from the past 12 months. The higher-risk findings here relate to: Pool and spa water quality.

What these findings mean

Health authorities word their findings differently, so we group them by what they mean for the people using the facility. Higher-risk findings are the ones that could directly cause illness or injury, such as water that is not properly treated.

  • Pool and spa water qualityHigher risk

    For pools, spas and splash pads, inspectors test disinfectant levels, pH and water clarity, and check safety equipment. Water that is not properly treated can spread skin, ear and stomach infections.

    Recorded 3 times on April 18, 2024. For example: Chlorine residual taken/recorded from same location and at same time as microbiological sample if system is treated with chlorine (free chlorine residual taken for chlorinated systems/combined chlorine residual taken for chloraminated systems) (S.18 & S.24(1))

  • Equipment and utensilsLower risk

    Pumps, filters, chemical feeders and safety equipment such as lifebuoys, reaching poles and first-aid kits must be present and working. Missing safety equipment can matter a great deal in an emergency.

    Recorded 4 times on April 18, 2024. For example: Distribution samples taken in accordance with the Directive that was issued to the owner of the SDWS (S.25)

  • Permits, records and postingLower risk

    Operating permits, water-test logs, posted bather rules and emergency procedures. Daily test logs are how operators show the water was checked and treated between inspections.

    Recorded 3 times across 2 separate inspections, most recently on June 6, 2024. For example: UV automatic alarm and/or shut-off tested routinely and recorded, in accordance with the manufacturer's instructions

  • Other findingsLower risk

    Findings that do not fit the categories above, such as follow-ups that confirm an earlier violation was corrected, or requirements specific to this type of facility.

    Recorded 8 times across 2 separate inspections, most recently on June 6, 2024. For example: Turbidity is measured in NTU (S.21)

About this data

These results come from Region of Waterloo Public Health, which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

2 inspections

  1. Re-inspection

    3 infractions

    • Turbidity is measured in NTU (S.21)
      • Ensure turbidity is measured in NTU
    • UV automatic alarm and/or shut-off tested routinely and recorded, in accordance with the manufacturer's instructions
      • Ensure UV automatic alarm and/or shut-off is tested and recorded in accordance with the manufacturer's instructions
    • UV light monitoring sensor(s) are checked and calibrated according to manufacturer's instructions (S.14(3))
      • Ensure UV light monitoring sensor(s) are checked and calibrated according to manufacturer's instructions
  2. Compliance Inspection

    15 infractions

    • Owner responsibilities fulfilled (check all that apply)
      • Maintenance of the Small Drinking Water System
      • Operational Checks
      • Record Keeping
      • Sample submission and reporting of adverse test results
    • Responsibilities of designated operator (check all that apply)
      • Maintenance of the Small Drinking Water System
      • Operational Checks
      • Record Keeping
      • Sample submission and reporting of adverse test results
    • Samples taken and handled in accordance with the instructions from the laboratory (S.23)
      • Ensure samples are taken and handled in accordance with the instructions from the laboratory
    • Distribution samples taken in accordance with the Directive that was issued to the owner of the SDWS (S.25)
      • Ensure at least one distribution sample is taken every 3 months during which the system is operating and supplying drinking water to users
    • Chlorine residual taken/recorded from same location and at same time as microbiological sample if system is treated with chlorine (free chlorine residual taken for chlorinated systems/combined chlorine residual taken for chloraminated systems) (S.18 & S.24(1))
      • Ensure chlorine residual is taken and recorded as required
    • Free available and/or combined chlorine residual is tested using an electronic direct readout colourmetric or amperometric chlorine analyzer, unless otherwise directed by a PHI (S.22)
      • Ensure appropriate electronic chlorine testing device is used
    • Turbidity is measured in NTU (S.21)
      • Ensure turbidity is measured in NTU
    • Water treatment equipment operated in a manner that achieves the design capabilities (treatment equipment working as designed) (S.14(1(3)))
      • Ensure water treatment equipment is operated in a manner that achieves the design capabilities
    • Free available or total chlorine residual taken and recorded at least once daily
      • Ensure free available or total chlorine residuals are taken and recorded at least once a day
      • Recommend chlorine residual is taken at farthest end of the distribution system
    • Current Directive being complied with (S.7)
      • Ensure current Directive is being complied with
    • SDWS and its equipment maintained in a safe and sanitary condition, and in a fit state of repair (S.6(2))
    • All operators of the SDWS trained in the operation and maintenance of the system and all safety and emergency procedures (S.6(3))
      • Ensure all operators of the SDWS are trained in the operation and maintenance of the system and all safety and emergency procedures
    • Water treatment equipment operated in accordance with the manufacturer's instructions (S.14(1(2)))
      • Ensure water treatment equipment is operated in accordance with the manufacturer's instructions
    • UV automatic alarm and/or shut-off tested routinely and recorded, in accordance with the manufacturer's instructions
      • Ensure UV automatic alarm and/or shut-off is tested and recorded in accordance with the manufacturer's instructions
    • UV light monitoring sensor(s) are checked and calibrated according to manufacturer's instructions (S.14(3))
      • Ensure UV light monitoring sensor(s) are checked and calibrated according to manufacturer's instructions

Nearby inspected facilities

Own this business? Add a badge to your website