Skip to content
Loading map…

Canalta Hanna - Whirlpool

113 Palliser Trail Hanna AB T0J 1P0 · Aquatic Facility

17 inspections

  1. Monitoring Inspection

    0 infractions

  2. Risk Management Inspection

    0 infractions

  3. Demand Inspection

    1 infraction

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • High HPC Level - 3220 CFU/mLSample collected on August 5, 2025.Spoke with Scott regarding the water report. He mentioned that the hot tub was super chlorinated on Tuesday, August 5th after sample was collected.
  4. Monitoring Inspection

    0 infractions

  5. Risk Management Inspection

    1 infraction

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • Pseudomonas isolated from the March 31, 2025 sample. Advised pool was scrubbed and shocked on April 4, 2025 and another sample will be submitted today.
  6. Demand Inspection

    0 infractions

  7. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Water sample collected on February 18, 2025 had HPC of 120 CFU/mL.
    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Water sample collected on February 4, 2025 had HPC of 110 CFU/mL.
    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Water sample collected on February 10, 2025 had HPC of 220 CFU/mL.
  8. Demand Inspection

    2 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Water sample collected on February 4, 2025 had HPC of 110 CFU/mL.
    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Water sample collected on February 10, 2025 had HPC of 220 CFU/mL.
  9. Risk Management Inspection

    0 infractions

  10. Demand Inspection

    2 infractions

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • Unsatisfactory bacteriological report received for sample collected on December 16, 2024.Results: Pseudomonas aeruginosa - Isolated*Close and treat pool water*Submit another sample for testing. Ensure to indicate on the perquisite form that it is a resample.
    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Unsatisfactory bacteriological report received for sample collected on December 16, 2024.Results: HPC - 57,00 CFU/mL*Treat pool water
  11. Monitoring Inspection

    0 infractions

  12. Risk Management Inspection

    0 infractions

  13. Demand Inspection

    3 infractions

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • - The bacteriological water sample collected on July 29, 2024, had TC present and Pseudomonas aeruginosa isolated and August 6, 2024, had Pseudomonas aeruginosa isolated.Hot tub was drain during the inspection after discussion with the operator on the decision that the pool must be closed. Closure decision was discussed with Manager at the time of inspection.
    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • Unsatisfactory bacteriological report received for sample collected on July 29, 2024.Results: TC - Present Pseudomonas aeruginosa - Isolated
    • 06. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Critical)?
      • - Chlorinator was not working properly according to the operator. Chlorine is being added to the pool manually. Ecolab will be onsite to fix the equipment on Monday, August 12, 2024, according to the operator.
  14. Demand Inspection

    1 infraction

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • Unsatisfactory bacteriological report received for sample collected on July 29, 2024.Results: TC - Present Pseudomonas aeruginosa - Isolated
  15. Monitoring Inspection

    0 infractions

  16. Risk Management Inspection

    2 infractions

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the hot tub is 2000G. Flow meter was observed to be at 55 GPM at the time of inspection. The turnover rate of the hot tub is 2000G/55 GPM = 36 minutes.The gauge for the sand filters were read at 11 psi. The sand filter of the whirlpool is a Triton II High-Rate Sand Filter. There are two sand filters connected to the pump. Surface area of the filter is 4.19 sq ft. The max filtration rate is 15 GPM/sq ft as stated on the manufacturer's spec plate. The max filtration flow rate is 74 GPM as again per the manufacturer's spec plate. The current rate of filtration: 55 GPM/8.38 sq ft = 6.56 GPM/sq ft. The automated controller in the maintenance room was reading at 727 mV for ORP and a pH of 7.28.Please ensure filtration rate for the pool is not too fast to allow adequate disinfection process and to maintain pool water quality.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Flow Meter Reading: 60 GPM Filtration: Turnover Rate: 2000/60 = 33 minutes. This appeared to be too slow. Hot tub volume is 2000 GPM (7470 L), the turnover needs to be every 20 minutes or 72 times a day. There are two Triton II High-Rate sand filters connected to the pump. Surface area of the filter is 4.19 sq ft each.The max filtration rate is 15 GPM/sq ft as stated on the manufacturer's spec plate. The max filtration flow rate is 74 GPM as again per the manufacturer's spec plate. The current rate of filtration: 60 GPM/8.38 sq ft = 7.16 GPM/sq ft which is within the max rate of filtration of 12.5 US gpm/sq ft. Note: Min flow rate 2000 gal/.25 hours/60 min/hour = 133.3 gpm.**Please ensure to increase the flow to at least 100 gpm to meet the 20-minute turnover requirement. This will increase the maximum rate of filtration to 11.93 gpm/sq ft which is still within range of the filter specifications.
  17. Monitoring Inspection

    1 infraction

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the hot tub is 2000G. Flow meter was observed to be at 55 GPM at the time of inspection. The turnover rate of the hot tub is 2000G/55 GPM = 36 minutes.The gauge for the sand filters were read at 11 psi. The sand filter of the whirlpool is a Triton II High-Rate Sand Filter. There are two sand filters connected to the pump. Surface area of the filter is 4.19 sq ft. The max filtration rate is 15 GPM/sq ft as stated on the manufacturer's spec plate. The max filtration flow rate is 74 GPM as again per the manufacturer's spec plate. The current rate of filtration: 55 GPM/8.38 sq ft = 6.56 GPM/sq ft. The automated controller in the maintenance room was reading at 727 mV for ORP and a pH of 7.28.Please ensure filtration rate for the pool is not too fast to allow adequate disinfection process and to maintain pool water quality.