Skip to content
Loading map…

Green Grove Pool

5307 50 Street Niton Junction AB T7E 1N9 · Aquatic Facility

7 inspections

  1. Risk Management Inspection

    0 infractions

  2. Risk Management Inspection

    1 infraction

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The automated chemical feeding and monitoring equipment is not calibrated.Ensure the system is properly calibrated and maintained in accordance with manufacturer specifications.
  3. Monitoring Inspection

    3 infractions

    • 05. Is the chemical quality of the water in this pool satisfactory (Non-Critical)?
      • The total alkalinity was recorded at 200 ppm. Adjust the water chemistry to bring the total alkalinity within the recommended range, and re-test to ensure levels are within acceptable limits.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The automated chemical feeding and monitoring equipment is not calibrated.Ensure the system is properly calibrated and maintained in accordance with manufacturer specifications.
    • 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
      • The pool water clarity was observed to be poor.Ensure the filtration system is functioning effectively, balance the chemical levels in the water, and only reopen the pool to the public once the water is clear and all parameters meet acceptable standards.
  4. Risk Management Inspection

    0 infractions

  5. Risk Management Inspection

    0 infractions

  6. Monitoring Inspection

    2 infractions

    • 04. Is the chemical quality of the water in this pool satisfactory (Critical)?
      • FAC: 5.99 ppmpH: 7.79CYA: 2 mg/L
    • 05. Is the chemical quality of the water in this pool satisfactory (Non-Critical)?
      • Combined Chlorine was measured at 0.14 PPM (satisfactory).TA is slightly high.Ensure the TA is always between 60-180 PPM.
  7. Monitoring Inspection

    0 infractions