Skip to content
Loading map…

Leisure Campground and Cabins - Pool

S 26-36-25 W4 Pine Lake AB T0M 1S0 · Aquatic Facility

Official record from Alberta →

Inspection summary

Leisure Campground and Cabins - Pool has been inspected 22 times by Alberta Health Services (Environmental Public Health) since February 20, 2024. The most recent inspection, on June 16, 2026, found no infractions.

1 of 22 inspections on record found no infractions at all. In the past 12 months there were 4 inspections with 6 infractions recorded. The higher-risk findings here relate to: Pool and spa water quality and Chemicals and toxic substances.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their findings differently, so we group them by what they mean for the people using the facility. Higher-risk findings are the ones that could directly cause illness or injury, such as water that is not properly treated.

  • Pool and spa water qualityHigher risk

    For pools, spas and splash pads, inspectors test disinfectant levels, pH and water clarity, and check safety equipment. Water that is not properly treated can spread skin, ear and stomach infections.

    Recorded 37 times across 20 separate inspections, most recently on June 16, 2026. For example: Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?

  • Chemicals and toxic substancesHigher risk

    Pool chemicals such as chlorine and acid must be labelled, stored apart from each other and handled safely. Mixing them by mistake can release toxic gas, so storage and handling problems are treated seriously.

    Recorded 3 times across 3 separate inspections, most recently on June 30, 2025. For example: Is the chemical quality of the water in this pool satisfactory (Critical)?

  • Food safety training and certificationLower risk

    Many jurisdictions require trained pool operators and certified lifeguards. These findings mean required training, certification or staffing records were missing at the time of inspection.

    Recorded 19 times across 19 separate inspections, most recently on June 5, 2026. For example: Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?

About this data

These results come from Alberta Health Services (Environmental Public Health), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

22 inspections

  1. Monitoring Inspection

    0 infractions

  2. Risk Management Inspection

    1 infraction

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Originally Cited 30 Jul 2025The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.July 30, 2025.Observed readings were:Flow rate: 90 gpm.Please follow the advice of your district inspector to ensure adequate filtration and safe pool operation.
  3. Risk Management Inspection

    2 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • September 10, 2025: Water sample was reported to have >57,000 CFU/mL of HPC. September 4, 2025: Water sample was reported to have 390 CFU/mL of HPC. August 27, 2025: Unsatisfactory routine water sample result: HPC 2240 CFU/mlClose the pool from public use immediately. Shock chlorinate the pool. After shock chlorinating, backwash the filter. Re-balance the water chemistry to bring the free chlorine level to at least 1.0ppm. The pool can then be re-opened to the public.Resample on your regular sampling day.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Originally Cited 30 Jul 2025The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.July 30, 2025.Observed readings were:Flow rate: 90 gpm.Please follow the advice of your district inspector to ensure adequate filtration and safe pool operation.
  4. Risk Management Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • September 10, 2025: Water sample was reported to have >57,000 CFU/mL of HPC. September 4, 2025: Water sample was reported to have 390 CFU/mL of HPC. August 27, 2025: Unsatisfactory routine water sample result: HPC 2240 CFU/mlClose the pool from public use immediately. Shock chlorinate the pool. After shock chlorinating, backwash the filter. Re-balance the water chemistry to bring the free chlorine level to at least 1.0ppm. The pool can then be re-opened to the public.Resample on your regular sampling day.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Originally Cited 30 Jul 2025The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.July 30, 2025.Observed readings were:Flow rate: 90 gpm.Please follow the advice of your district inspector to ensure adequate filtration and safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  5. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • September 10, 2025: Water sample was reported to have >57,000 CFU/mL of HPC. September 4, 2025: Water sample was reported to have 390 CFU/mL of HPC. August 27, 2025: Unsatisfactory routine water sample result: HPC 2240 CFU/mlClose the pool from public use immediately. Shock chlorinate the pool. After shock chlorinating, backwash the filter. Re-balance the water chemistry to bring the free chlorine level to at least 1.0ppm. The pool can then be re-opened to the public.Resample on your regular sampling day.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Originally Cited 30 Jul 2025The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.July 30, 2025.Observed readings were:Flow rate: 90 gpm.Please follow the advice of your district inspector to ensure adequate filtration and safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.July 30, 2025.Completed anti-entrampment plan not observed at the time of inspection.
  6. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • September 4, 2025: Water sample was reported to have 390 CFU/mL of HPC. August 27, 2025: Unsatisfactory routine water sample result: HPC 2240 CFU/mlClose the pool from public use immediately. Shock chlorinate the pool. After shock chlorinating, backwash the filter. Re-balance the water chemistry to bring the free chlorine level to at least 1.0ppm. The pool can then be re-opened to the public.Resample on your regular sampling day.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Originally Cited 30 Jul 2025The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.July 30, 2025.Observed readings were:Flow rate: 90 gpm.Please follow the advice of your district inspector to ensure adequate filtration and safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.July 30, 2025.Completed anti-entrampment plan not observed at the time of inspection.
  7. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Unsatisfactory routine water sample result: HPC 2240 CFU/mlClose the pool from public use immediately. Shock chlorinate the pool. After shock chlorinating, backwash the filter. Re-balance the water chemistry to bring the free chlorine level to at least 1.0ppm. The pool can then be re-opened to the public.Resample on your regular sampling day
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Originally Cited 30 Jul 2025The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.July 30, 2025.Observed readings were:Flow rate: 90 gpm.Please follow the advice of your district inspector to ensure adequate filtration and safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.July 30, 2025.Completed anti-entrampment plan not observed at the time of inspection.
  8. Risk Management Inspection

    2 infractions

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Originally Cited 30 Jul 2025The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.July 30, 2025.Observed readings were:Flow rate: 90 gpm.Please follow the advice of your district inspector to ensure adequate filtration and safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.July 30, 2025.Completed anti-entrampment plan not observed at the time of inspection.
  9. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • 1. Routine water sample result: HPC – 1570 CFU/mlClose the pool from public use immediately. Shock chlorinate the pool. After shock chlorinating, backwash the filter. Re-balance the water chemistry to bring the free chlorine level to at least 1.0ppm. The pool can then be re-opened to the public.Resample on your regular sampling day
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Originally Cited 30 Jul 2025The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.July 30, 2025.Observed readings were:Flow rate: 90 gpm.Please follow the advice of your district inspector to ensure adequate filtration and safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.July 30, 2025.Completed anti-entrampment plan not observed at the time of inspection.
  10. Demand Inspection

    2 infractions

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.July 30, 2025.Observed readings were:Flow rate: 90 gpm.Please follow the advice of your district inspector to ensure adequate filtration and safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.July 30, 2025.Completed anti-entrampment plan not observed at the time of inspection.
  11. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • The July 16, 2025 water sample was reported to measure 1,330 CFU/mL of HPC in the sample.Please ensure that the chemical parameters are reviewed, any necessary treatment is completed, and a re-sample is submitted.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  12. Risk Management Inspection

    2 infractions

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 90 GPM) 171 GPM or 647.31 LPM at the time of inspection. The turnover rate of the pool is 211,000L/647.31/60 = 5.43 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 302.83 LPM/0.45 sq meters = 672.96 LPM/sq meters or 16.33 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 340.69 LPM/0.45 sq meters = 757.09 LPM/sq meters or 18.36 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (80 GPM and 90 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  13. Risk Management Inspection

    3 infractions

    • 04. Is the chemical quality of the water in this pool satisfactory (Critical)?
      • The pool chemistry was measured as follows:- pH: 7.73, 7.73- Free chlorine: 6.9 ppmPlease ensure that the pH is maintained within a range of 6.8-7.6.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 88 GPM) 169 GPM or 639.73 LPM at the time of inspection. The turnover rate of the pool is 211,000L/639.73/60 = 5.50 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 306.62 LPM/0.45 sq meters = 681.38 LPM/sq meters or 16.5 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 333.12 LPM/0.45 sq meters = 740.27 LPM/sq meters or 17.96 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (88 GPM and 81 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  14. Risk Management Inspection

    5 infractions

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • The water sample collected on June 18, 2025 was reported to have the presence of Total Coliforms. Please ensure that a re-sample is submitted and the pool system parameters are reviewed. Any potential concerns should be addressed accordingly.
    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • The water sample collected on June 18, 2025 was reported to have greater than 57,000 CFU/mL of HPC. The water sample collected on September 10, 2024 was reported to be unsatisfactory for HPC, measuring at 430 CFU/mL.Please ensure that a re-sample is submitted as discussed.
    • 04. Is the chemical quality of the water in this pool satisfactory (Critical)?
      • The pool chemistry was measured as follows:- pH: 7.73, 7.73- Free chlorine: 6.9 ppmPlease ensure that the pH is maintained within a range of 6.8-7.6.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 88 GPM) 169 GPM or 639.73 LPM at the time of inspection. The turnover rate of the pool is 211,000L/639.73/60 = 5.50 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 306.62 LPM/0.45 sq meters = 681.38 LPM/sq meters or 16.5 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 333.12 LPM/0.45 sq meters = 740.27 LPM/sq meters or 17.96 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (88 GPM and 81 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  15. Monitoring Inspection

    5 infractions

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • The water sample collected on June 18, 2025 was reported to have the presence of Total Coliforms. Please ensure that a re-sample is submitted and the pool system parameters are reviewed. Any potential concerns should be addressed accordingly.
    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • The water sample collected on June 18, 2025 was reported to have greater than 57,000 CFU/mL of HPC. The water sample collected on September 10, 2024 was reported to be unsatisfactory for HPC, measuring at 430 CFU/mL.Please ensure that a re-sample is submitted as discussed.
    • 04. Is the chemical quality of the water in this pool satisfactory (Critical)?
      • The pool chemistry was measured as follows:- pH: 7.85 and 7.93- Free chlorine: OR, 10.32 ppm- Cyanuric acid: 12 ppmPlease ensure that the pH is maintained within a range of 6.8-7.6.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of (81 GPM + 88 GPM) 169 GPM or 639.73 LPM at the time of inspection. The turnover rate of the pool is 211,000L/639.73/60 = 5.50 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 306.62 LPM/0.45 sq meters = 681.38 LPM/sq meters or 16.5 GPM/sqft which is outside the values noted in the Pool Standards. - Filter 2 is 333.12 LPM/0.45 sq meters = 740.27 LPM/sq meters or 17.96 GPM/sq ft which is outside the values noted in the Pool Standards. Flow rate that was observed for each filter (88 GPM and 81 GPM) are within the manufacturer's instructions for the filtration flow rate of 98 GPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate filtration and pool water turnover, as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  16. Demand Inspection

    4 infractions

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • The water sample collected on June 18, 2025 was reported to have the presence of Total Coliforms. Please ensure that a re-sample is submitted and the pool system parameters are reviewed. Any potential concerns should be addressed accordingly.
    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • The water sample collected on June 18, 2025 was reported to have greater than 57,000 CFU/mL of HPC. The water sample collected on September 10, 2024 was reported to be unsatisfactory for HPC, measuring at 430 CFU/mL.Please ensure that a re-sample is submitted as discussed.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of 760 LPM at the time of inspection. The turnover rate of the pool is 211,000L/(345LPM + 403LPM)/60 = 4.70 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 345 LPM/0.45 sq meters = 766.67 LPM/sq meters. - Filter 2 is 403 LPM/0.45 sq meters = 895.56 LPM/sq meters or 21.73 GPM/sq ft which is outside values noted in the Pool Standards and the manufacturer's spec of 20 GPM/sq ft. Flow rate that was observed for each filter was 345 LPM and 403 LPM. The filter running at 403 LPM exceeds the filtration flow rate of 370 LPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate turnover as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  17. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • The water sample collected on September 10, 2024 was reported to be unsatisfactory for HPC, measuring at 430 CFU/mL.Please ensure that a re-sample is submitted as discussed.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of 760 LPM at the time of inspection. The turnover rate of the pool is 211,000L/(345LPM + 403LPM)/60 = 4.70 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 345 LPM/0.45 sq meters = 766.67 LPM/sq meters. - Filter 2 is 403 LPM/0.45 sq meters = 895.56 LPM/sq meters or 21.73 GPM/sq ft which is outside values noted in the Pool Standards and the manufacturer's spec of 20 GPM/sq ft. Flow rate that was observed for each filter was 345 LPM and 403 LPM. The filter running at 403 LPM exceeds the filtration flow rate of 370 LPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate turnover as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  18. Risk Management Inspection

    2 infractions

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of 760 LPM at the time of inspection. The turnover rate of the pool is 211,000L/(345LPM + 403LPM)/60 = 4.70 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 345 LPM/0.45 sq meters = 766.67 LPM/sq meters. - Filter 2 is 403 LPM/0.45 sq meters = 895.56 LPM/sq meters or 21.73 GPM/sq ft which is outside values noted in the Pool Standards and the manufacturer's spec of 20 GPM/sq ft. Flow rate that was observed for each filter was 345 LPM and 403 LPM. The filter running at 403 LPM exceeds the filtration flow rate of 370 LPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate turnover as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  19. Demand Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • The August 7, 2024 water result was reported to be unsatisfactory with HPC measured at 1080 CFU/mL.Please ensure that a re-sample is submitted.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of 760 LPM at the time of inspection. The turnover rate of the pool is 211,000L/(345LPM + 403LPM)/60 = 4.70 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 345 LPM/0.45 sq meters = 766.67 LPM/sq meters. - Filter 2 is 403 LPM/0.45 sq meters = 895.56 LPM/sq meters or 21.73 GPM/sq ft which is outside values noted in the Pool Standards and the manufacturer's spec of 20 GPM/sq ft. Flow rate that was observed for each filter was 345 LPM and 403 LPM. The filter running at 403 LPM exceeds the filtration flow rate of 370 LPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate turnover as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  20. Risk Management Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • A water sample has yet to be submitted this year according to the lab.Please ensure that a sample is submitted prior to opening the pool.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of 760 LPM at the time of inspection. The turnover rate of the pool is 211,000L/(345LPM + 403LPM)/60 = 4.70 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 345 LPM/0.45 sq meters = 766.67 LPM/sq meters. - Filter 2 is 403 LPM/0.45 sq meters = 895.56 LPM/sq meters or 21.73 GPM/sq ft which is outside values noted in the Pool Standards and the manufacturer's spec of 20 GPM/sq ft. Flow rate that was observed for each filter was 345 LPM and 403 LPM. The filter running at 403 LPM exceeds the filtration flow rate of 370 LPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate turnover as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • Additional information is required to complete anti-entrapment review.Please provide requested information.
  21. Monitoring Inspection

    3 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • A water sample has yet to be submitted this year according to the lab.Please ensure that a sample is submitted prior to opening the pool.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • The volume of the pool is 211,000 Liters. Flow meters were observed to be at a combined rate of 760 LPM at the time of inspection. The turnover rate of the pool is 211,000L/(345LPM + 403LPM)/60 = 4.70 hours which has been allowed per previous EPH approval.The two sand filters of the pool are a Hayward Pro Series sand filter (model number S310T2). - Surface area of each filter is 4.9 sq ft or 0.45 sq meters. - The max filtration rate for each filter is 20 GPM/sq ft or 814 LPM/sq meter. - The max filtration flow rate 98 GPM or 370 LPM as per the manufacturer's spec plate. The maximum rate of filtration for - Filter 1 is 345 LPM/0.45 sq meters = 766.67 LPM/sq meters. - Filter 2 is 403 LPM/0.45 sq meters = 895.56 LPM/sq meters or 21.73 GPM/sq ft which is outside values noted in the Pool Standards and the manufacturer's spec of 20 GPM/sq ft. Flow rate that was observed for each filter was 345 LPM and 403 LPM. The filter running at 403 LPM exceeds the filtration flow rate of 370 LPM. Please ensure that the flow rates for each filter are adjusted to ensure adequate turnover as well as safe pool operation.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • The main drains were replaced and a new anti-entrapment plan was not submitted.Ensure new anti-entrapment plan is submitted for review
  22. Risk Management Inspection

    1 infraction

    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • The main drains were replaced and new antientrapment plan was not submitted.- Ensure new anti-entrapment plan is submitted for review
Own this business? Add a badge to your website