Skip to content
Loading map…

MacEwan University Sport And Wellness - Whirlpool

10700 104 Avenue NW Edmonton AB T5J 4S2 · Aquatic Facility

Official record from Alberta →

Inspection summary

MacEwan University Sport And Wellness - Whirlpool has been inspected 3 times by Alberta Health Services (Environmental Public Health) since January 24, 2024. The most recent inspection, on April 24, 2026, recorded 1 infraction.

1 of 3 inspections on record found no infractions at all. In the past 12 months there were 2 inspections with 2 infractions recorded. The higher-risk findings here relate to: Pool and spa water quality.

What these findings mean

Health authorities word their findings differently, so we group them by what they mean for the people using the facility. Higher-risk findings are the ones that could directly cause illness or injury, such as water that is not properly treated.

  • Pool and spa water qualityHigher risk

    For pools, spas and splash pads, inspectors test disinfectant levels, pH and water clarity, and check safety equipment. Water that is not properly treated can spread skin, ear and stomach infections.

    Recorded 2 times across 2 separate inspections, most recently on April 24, 2026. For example: Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?

About this data

These results come from Alberta Health Services (Environmental Public Health), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

3 inspections

  1. Demand Inspection

    1 infraction

    • 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
      • Operations team noted that 1 of 4 screws and hardware was missing on the suction outlets in the whirlpool. It appears that the screw/bolt was sheared off in the anchor to the basin. The T hardware is also missing that slides between each I beam to secure the suction outlet to the basin.Refer to installation manual for correct hardware to secure the main drain to frame. Determine is anchor can be reused and drain secured to basin. Contact the manufacture if additional confirmation is necessary. Once work is completed provide photos and confirmation suction outlets have been secured to the basin as required by the manufacture.
  2. Monitoring Inspection

    1 infraction

    • 18. Have plans for construction, renovations or alteration for the pool been submitted for written approval?
      • When asked about the scheduled facility shutdown aquatic staff stated that there was plans to upgrade the chemical and controller systems. Ensure that specifications and scope of work are sent to the undersigned for review and comment before work commences.
  3. Monitoring Inspection

    0 infractions

Nearby inspected facilities

Own this business? Add a badge to your website