Skip to content
Loading map…

Sundre & District Aquaplex - Leisure Pool

105 Second Avenue NW Sundre AB T0M 1X0 · Aquatic Facility

Official record from Alberta →

Inspection summary

Sundre & District Aquaplex - Leisure Pool has been inspected 10 times by Alberta Health Services (Environmental Public Health) since February 14, 2024. The most recent inspection, on July 29, 2026, found no infractions.

6 of 10 inspections on record found no infractions at all. In the past 12 months there were 3 inspections with 0 infractions recorded. The higher-risk findings here relate to: Pool and spa water quality and Food temperature control.

The last 6 inspections in a row found no infractions. Recent inspections have recorded fewer infractions than earlier ones, so the record is improving.

What these findings mean

Health authorities word their findings differently, so we group them by what they mean for the people using the facility. Higher-risk findings are the ones that could directly cause illness or injury, such as water that is not properly treated.

  • Pool and spa water qualityHigher risk

    For pools, spas and splash pads, inspectors test disinfectant levels, pH and water clarity, and check safety equipment. Water that is not properly treated can spread skin, ear and stomach infections.

    Recorded 5 times across 4 separate inspections, most recently on March 25, 2024. For example: Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?

  • Food temperature controlHigher risk

    Inspectors check that anything that has to be kept at a set temperature, such as chilled or hot food, or equipment like sterilizers, stays in its safe range and that accurate thermometers are on hand. With food, temperature problems are one of the most common causes of food poisoning.

    Recorded 3 times across 3 separate inspections, most recently on February 23, 2024. For example: Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?

About this data

These results come from Alberta Health Services (Environmental Public Health), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

10 inspections

  1. Monitoring Inspection

    0 infractions

  2. Monitoring Inspection

    0 infractions

  3. Monitoring Inspection

    0 infractions

  4. Monitoring Inspection

    0 infractions

  5. Monitoring Inspection

    0 infractions

  6. Risk Management Inspection

    0 infractions

  7. Demand Inspection

    1 infraction

    • 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
      • Automated Aquatics has completed the anti-entrapment plan - Jan 2024. Leisure pool recirc - 1 pump, 2 floor SOFAs. Expired Sept 2023. Two, Waterway 640-4790V 9 x 9” ANSI/APSP 16, 2011Max flow 289 gpm. Armstrong 3x2x10 4030 5 HP - Max flow of pump 205 gpm using flow meter. Frame and cover install method. No cracks in frame. Proper hardware used. Cover is not damaged. Certificate of conformity –provided for 9 x 9 grate 640-479X V for VGB 2008 and VGB 2017Water Slide Wall outlets for slide – two, 12” x 12” Unknown make/model - not approved. No information available. No max flow known for covers.Armstrong 8x6x10 4030 5 HP Max flow of 1015 gpm using pump curve . Max pump flow as per pump curve is 1015 gpm. Action1) Pool is monitored and there are designated staff for the leisure pool as there is no known information of wall SOFAs for slide. 2) Replace covers in leisure pool. Provide complete Certificate of Conformity. 3) Assess wall mounted SOFAs for slide, confirm actual flow using ultrasonic flow meter for a one time reading (photos required) or have flow meter installed on pump. Approved flow securement to decrease max pump flow is an option BUT you must have a flow meter installed on the pump and there will be monitoring and recording required to ensure system is working. Once flow is determined/controlled then approved covers that meet or exceed max flow rating of pump are required - provide a completed Certificate of Conformity. New SOFA covers will be installed starting March 27. Some of the pool basin surface needs to be removed so that new mud rings can be installed for the new covers. Operator is aware that anti-entrapment plan will need to be updated, and a copy provided to EPH. Certificates of compliance must be filled out and included in the updated plan.
  8. Risk Management Inspection

    2 infractions

    • 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
      • Automated Aquatics has completed the anti-entrapment plan - Jan 2024. Leisure pool recirc - 1 pump, 2 floor SOFAs. Expired Sept 2023. Two, Waterway 640-4790V 9 x 9” ANSI/APSP 16, 2011Max flow 289 gpm. Armstrong 3x2x10 4030 5 HP - Max flow of pump 205 gpm using flow meter. Frame and cover install method. No cracks in frame. Proper hardware used. Cover is not damaged. Certificate of conformity –provided for 9 x 9 grate 640-479X V for VGB 2008 and VGB 2017Water Slide Wall outlets for slide – two, 12” x 12” Unknown make/model - not approved. No information available. No max flow known for covers.Armstrong 8x6x10 4030 5 HP Max flow of 1015 gpm using pump curve . Max pump flow as per pump curve is 1015 gpm. Action1) Pool is monitored and there are designated staff for the leisure pool as there is no known information of wall SOFAs for slide. 2) Replace covers in leisure pool. Provide complete Certificate of Conformity. 3) Assess wall mounted SOFAs for slide, confirm actual flow using ultrasonic flow meter for a one time reading (photos required) or have flow meter installed on pump. Approved flow securement to decrease max pump flow is an option BUT you must have a flow meter installed on the pump and there will be monitoring and recording required to ensure system is working. Once flow is determined/controlled then approved covers that meet or exceed max flow rating of pump are required - provide a completed Certificate of Conformity.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • Deck is cleaned/sanitized in zones per day. High traffic areas on deck are sanitized daily. At the end of the run out for the slide - there is a small plastic wall that has 4 round outlets. One of the covers is in disrepair as it is missing the center piece and needs to be replaced.
  9. Demand Inspection

    3 infractions

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • Pseudomonas isolated from Feb 14, 24 sample. Spoke and emailed, manager, Kari. Modified pseudomonas protocols will be followed ie. scrubbing basin, backwashing and superchlorination. Pool was closed until pseudomonas protocol is complete. Will resample as usual this week.
    • 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
      • Automated Aquatics has completed the anti-entrapment plan - Jan 2024. Leisure pool recirc - 1 pump, 2 floor SOFAs. Expired Sept 2023. Two, Waterway 640-4790V 9 x 9” ANSI/APSP 16, 2011Max flow 289 gpm. Armstrong 3x2x10 4030 5 HP - Max flow of pump 205 gpm using flow meter. Frame and cover install method. No cracks in frame. Proper hardware used. Cover is not damaged. Certificate of conformity –provided for 9 x 9 grate 640-479X V for VGB 2008 and VGB 2017Water Slide Wall outlets for slide – two, 12” x 12” Unknown make/model - not approved. No information available. No max flow known for covers.Armstrong 8x6x10 4030 5 HP Max flow of 1015 gpm using pump curve . Max pump flow as per pump curve is 1015 gpm. Action1) Pool is monitored and there are designated staff for the leisure pool as there is no known information of wall SOFAs for slide. 2) Replace covers in leisure pool. Provide complete Certificate of Conformity. 3) Assess wall mounted SOFAs for slide, confirm actual flow using ultrasonic flow meter for a one time reading (photos required) or have flow meter installed on pump. Approved flow securement to decrease max pump flow is an option BUT you must have a flow meter installed on the pump and there will be monitoring and recording required to ensure system is working. Once flow is determined/controlled then approved covers that meet or exceed max flow rating of pump are required - provide a completed Certificate of Conformity.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • Deck is cleaned/sanitized in zones per day. High traffic areas on deck are sanitized daily. At the end of the run out for the slide - there is a small plastic wall that has 4 round outlets. One of the covers is in disrepair as it is missing the center piece and needs to be replaced.
  10. Monitoring Inspection

    2 infractions

    • 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
      • Automated Aquatics has completed the anti-entrapment plan - Jan 2024. Leisure pool recirc - 1 pump, 2 floor SOFAs. Expired Sept 2023. Two, Waterway 640-4790V 9 x 9” ANSI/APSP 16, 2011Max flow 289 gpm. Armstrong 3x2x10 4030 5 HP - Max flow of pump 205 gpm using flow meter. Frame and cover install method. No cracks in frame. Proper hardware used. Cover is not damaged. Certificate of conformity –provided for 9 x 9 grate 640-479X V for VGB 2008 and VGB 2017Water Slide Wall outlets for slide – two, 12” x 12” Unknown make/model - not approved. No information available. No max flow known for covers.Armstrong 8x6x10 4030 5 HP Max flow of 1015 gpm using pump curve . Max pump flow as per pump curve is 1015 gpm. Action1) Pool is monitored and there are designated staff for the leisure pool as there is no known information of wall SOFAs for slide. 2) Replace covers in leisure pool. Provide complete Certificate of Conformity. 3) Assess wall mounted SOFAs for slide, confirm actual flow using ultrasonic flow meter for a one time reading (photos required) or have flow meter installed on pump. Approved flow securement to decrease max pump flow is an option BUT you must have a flow meter installed on the pump and there will be monitoring and recording required to ensure system is working. Once flow is determined/controlled then approved covers that meet or exceed max flow rating of pump are required - provide a completed Certificate of Conformity.
    • 14. Is the pool maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • Deck is cleaned/sanitized in zones per day. High traffic areas on deck are sanitized daily. At the end of the run out for the slide - there is a small plastic wall that has 4 round outlets. One of the covers is in disrepair as it is missing the center piece and needs to be replaced.
Own this business? Add a badge to your website