Skip to content
Loading map…

AJISEN RAMEN

#15 KING St. N, Waterloo ON N2J 2W6 · Facility

Official record from Waterloo Region →

Inspection summary

AJISEN RAMEN has been inspected 6 times by Region of Waterloo Public Health since January 23, 2025. The most recent inspection, on September 28, 2026, found no infractions.

1 of 6 inspections on record found no infractions at all. In the past 12 months there were 4 inspections with 9 infractions recorded. The higher-risk findings here relate to: Food temperature control, Protecting food from contamination and Cleaning and sanitizing.

Recent inspections have recorded fewer infractions than earlier ones, so the record is improving.

What these findings mean

Health authorities word their findings differently, so we group them by what they mean for your health. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Food temperature controlHigher risk

    Inspectors check that anything that has to be kept at a set temperature, such as chilled or hot food, or equipment like sterilizers, stays in its safe range and that accurate thermometers are on hand. With food, temperature problems are one of the most common causes of food poisoning.

    Recorded 7 times across 5 separate inspections, most recently on September 9, 2026. For example: Food is held at 4°C (40°F) or less

  • Protecting food from contaminationHigher risk

    This covers how food and supplies are stored and handled: kept covered, off the floor, and away from anything that could contaminate them. Where food is served, raw meat must be kept away from ready-to-eat food, a direct route for salmonella and E. coli.

    Recorded 3 times across 2 separate inspections, most recently on July 9, 2025. For example: Floors, walls, and ceilings clean and in good repair and maintained in a sanitary manner

  • Cleaning and sanitizingHigher risk

    Surfaces, dishes and tools that touch food or people must be cleaned and then sanitized or disinfected. Inspectors check sanitizer strength, dishwasher temperatures and how cleaning is done. Poor sanitizing lets germs survive from one use to the next.

    Recorded once on January 23, 2025. For example: Equipment, utensils, multi-service articles and all food contact surfaces are properly constructed and maintained

  • Food safety training and certificationLower risk

    Many jurisdictions require a trained or certified person on site, such as a certified food handler. These findings mean the training record or the trained person was missing at the time. They do not by themselves mean anything was handled unsafely.

    Recorded 3 times across 2 separate inspections, most recently on September 3, 2026. For example: Separate hand washing basin provided for food handlers

  • Building, plumbing and upkeepLower risk

    Floors, walls and ceilings must be clean and in good repair, with working lighting, ventilation, plumbing, hot and cold water, and washrooms. These are rarely an immediate health risk on their own, but persistent problems can lead to pest or sanitation issues.

    Recorded 2 times on July 9, 2025. For example: Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat

About this data

These results come from Region of Waterloo Public Health, which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

6 inspections

  1. Re-inspection

    0 infractions

  2. Re-inspection

    2 infractions

    • Food is held at 4°C (40°F) or less
      • Adjust or repair the refrigeration unit immediately. Do not store any hazardous foods in the unit until it is able to maintain hazardous foods at 4°C (40°F) or less
      • Ensure all hazardous foods are stored at 4°C (40°F) or less
    • Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
      • Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
  3. Compliance Inspection

    4 infractions

    • Food processed in a safe manner
      • Process food in a manner to ensure it is safe to eat
      • Ensure hazardous foods do not remain in the temperature range of 4C to 60C for more than 2 hours during handling, preparation or service
    • Food is held at 4°C (40°F) or less
      • Adjust or repair the refrigeration unit immediately. Do not store any hazardous foods in the unit until it is able to maintain hazardous foods at 4°C (40°F) or less
      • Ensure all hazardous foods are stored at 4°C (40°F) or less
    • Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
      • Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
    • Separate hand washing basin provided for food handlers
      • Ensure hand washing basin is unobstructed and accessible for hand washing
  4. Compliance Inspection

    3 infractions

    • Food is held at 4°C (40°F) or less
      • Adjust or repair the refrigeration unit immediately. Do not store any hazardous foods in the unit until it is able to maintain hazardous foods at 4°C (40°F) or less
      • Ensure all hazardous foods are stored at 4°C (40°F) or less
      • Thaw all hazardous foods maintaining a temperature of 4°C (40°F) or less
    • Separate hand washing basin provided for food handlers
      • Hand washing station must be used only for hand washing of employees
      • Ensure hand washing basin is unobstructed and accessible for hand washing
    • Food handlers who come into contact with food/utensils do so in a sanitary manner
      • Ensure food handlers wash hands as often as necessary
  5. Compliance Inspection

    4 infractions

    • Food is held at 4°C (40°F) or less
      • Adjust or repair the refrigeration unit immediately. Do not store any hazardous foods in the unit until it is able to maintain hazardous foods at 4°C (40°F) or less
      • Ensure all hazardous foods are stored at 4°C (40°F) or less
    • Floors, walls, and ceilings clean and in good repair and maintained in a sanitary manner
      • Cleaning required around, under, and behind kitchen equipment, counters, and baseboards
      • Ensure ceilings are kept clean and in good repair
      • Ensure floors are kept clean and in good repair
      • Ensure floors, walls, and ceilings are tight, smooth, and non-absorbent
      • Ensure walls are kept clean and in good repair
    • Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
      • Ventilation system requires thorough cleaning
    • Cloths and towels maintained in clean, good repair and not used for other purposes
      • Change sanitizing solution for wiping cloths at a minimum of every 2 hours, or as often as necessary, to maintain the solution clean and sanitary at all times
      • Ensure wiping cloths are kept in a sanitizing solution when not in use
      • Provide sanitizing solution for wiping cloths/rinsing large utensils/rinsing food contact surfaces
  6. Compliance Inspection

    4 infractions

    • Food protected from contamination or adulteration
    • Refrigeration and hot-holding equipment maintained
      • Provide easily readable thermometer in refrigeration or hot-holding equipment
    • Floors, walls, and ceilings clean and in good repair and maintained in a sanitary manner
      • Cleaning required around, under, and behind kitchen equipment, counters, and baseboards
      • Ensure ceilings are kept clean and in good repair
      • Ensure floors are kept clean and in good repair
      • Ensure floors, walls, and ceilings are tight, smooth, and non-absorbent
      • Ensure walls are kept clean and in good repair
    • Equipment, utensils, multi-service articles and all food contact surfaces are properly constructed and maintained
      • Ensure equipment, utensils and or multi-service articles are cleaned and sanitized
      • Ensure ventilation system/exhaust hood/filters/canopy is maintained in a clean and sanitary manner

Nearby inspected facilities

Own this business? Add a badge to your website