Bamiyan Kabob
A26 1755 Pickering Pkwy, Pickering ON L1V 6K5 · Food Safety Inspections
6 inspections
- Routine
2 infractions
- Minimum of 1 Certified Food Handler per hour of operation?
- * Fail to provide proof of a certified food handler certificate
- Operator to provide proof of a certified food handler certificate
- Food protected from potential contamination and/or adulteration
- * Observed scoops/utensils not being stored in a sanitary manner to prevent contamination and/or adulteration
- Operator to ensure scoops/utensils are stored and maintained in a sanitary manner to prevent contamination and/or adulteration
- Minimum of 1 Certified Food Handler per hour of operation?
- Routine
1 infraction
- Sanitary maintenance of and provision of required supplies in staff / public washroom facilities
- * Fail to equip facility with a supply of soap or detergent
- * Fail to equip facility with a method of hand drying that uses single-service towels or a hot air dryer
- * Fail to equip facility with toilet paper
- Operator to ensure the washroom facilities are properly supplied with soap/detergent, single-service towels or hot air dryer, toilet paper and hot and cold running water
- Sanitary maintenance of and provision of required supplies in staff / public washroom facilities
- Routine
4 infractions
- Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
- Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)
- * Fail to use equipment/utensils/dishes/food containers/multi-service articles in good repair (i.e. free from cracks/crevices/chips/open seams)
- Operator to ensure all food contact surfaces, utensils and/or multi-service articles are cleaned and sanitized after each use and are maintained in good repair
- Manual dishwashing: Wash, rinse, sanitize technique
- * Fail to provide sufficient detergent, chemicals, or required water temperatures for washing and sanitizing
- * Fail to use proper wash/rinse/sanitize technique
- Chlorine sanitizer concentration must be at least 100 parts per million and not lower than 24°C for at least 45 seconds
- Food contact surfaces washed / rinsed / sanitized after each use and following any operations when contamination may have occurred
- * Fail to ensure sanitizing solution contains the appropriate type of chemical solution and/or concentration/strength of sanitizer
- Operator to ensure sanitizing solution contain the appropriate type of chemical solution and/or concentration/strength for sanitizing
- Routine
0 infractions
- Routine
3 infractions
- Thermometers used to verify food preparation and storage temperatures
- * Fail to provide thermometer in temperature controlled room / equipment used to store potentially hazardous foods
- Operator to provide accurate and easily readable indicating thermometers in temperature controlled rooms/equipment used for storage of potentially hazardous foods
- Food protected from potential contamination and/or adulteration
- * Observed scoops/utensils not being stored in a sanitary manner to prevent contamination and/or adulteration
- Operator to ensure scoops/utensils are stored and maintained in a sanitary manner to prevent contamination and/or adulteration
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Thermometers used to verify food preparation and storage temperatures
- Routine
2 infractions
- Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)
- * Fail to maintain utensils, multi-service articles and/or food contact surfaces in a clean and sanitary manner and/or in good repair
- * Fail to use equipment/utensils/dishes/food containers/multi-service articles in good repair (i.e. free from cracks/crevices/chips/open seams)
- Operator to ensure all food contact surfaces, utensils and/or multi-service articles are cleaned and sanitized after each use and are maintained in good repair
- Manual dishwashing: Wash, rinse, sanitize technique
- * Fail to ensure adequate sanitizer concentration are achieved for sanitizing
- * Fail to use proper wash/rinse/sanitize technique
- Chlorine sanitizer concentration must be at least 100 parts per million and not lower than 24°C for at least 45 seconds
- Operator to ensure the proper wash/rinse/sanitize dishwashing technique is applied
- Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)