BARYKIN BISTRO
47 PAINT, PORT HAWKESBURY · Food Establishment
7 inspections
- Inspection
0 infractions
- Inspection
0 infractions
- Inspection
1 infraction
- 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator:
(b) adequately designed and appropriately located hand-washing facilities;
- Ensure leak from faucet on hand wash station is repaired.
- 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator:
(b) adequately designed and appropriately located hand-washing facilities;
- Inspection
2 infractions
- 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator:
(b) adequately designed and appropriately located hand-washing facilities;
- Ensure leak from faucet on hand wash station is repaired.
- 33(2) The operator must ensure that all refrigeration and heat-holding equipment has a temperature measuring device that is accurate and in good repair.
- In accordance with Section 4.1.11 of the Nova Scotia Food Services and Food Retail Code, you must: have a functioning thermometer(s) on all heating and cooling equipment; and calibrate all thermometers routinely and maintain calibration logs. Ensure a functional thermometer is in each refrigeration unit.
- 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator:
(b) adequately designed and appropriately located hand-washing facilities;
- Inspection
0 infractions
- Inspection
1 infraction
- 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(b) insects, rodents and other pests are controlled;
- In accordance with Section 4.3.2 of the NS Food Retail and Food Services Code, you must ensure: a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly. c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects. d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods. Ensure a Pest Control Operator is employed.
- 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(b) insects, rodents and other pests are controlled;
- Inspection
2 infractions
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;
- In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. Ensure hard-to-reach areas are cleaned at a greater frequency.
- 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(b) insects, rodents and other pests are controlled;
- In accordance with Section 4.3.2 of the NS Food Retail and Food Services Code, you must ensure: a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly. c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects. d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods. Ensure a Pest Control Operator is employed.
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;