Beauty Pulse Medspa
201A 965 Dundas St W, Whitby ON L1P 1A1 · Know Before You Go Inspections
3 inspections
- Routine
4 infractions
- Work and contact surfaces smooth, non-absorbent and easily cleanable
- Fail to provide fixture and/or furniture in good repair, easily cleanable, smooth and/or impermeable. Operator/PSW must provide fixture and/or furniture in good repair, easily cleanable, smooth and/or impermeable.
- For invasive services an explanation of the procedure, associated risks and appropriate aftercare are provided to clients
- For electrolysis and laser hair removal, aftercare instructions may include, but are not limited to: Direction to clean hands immediately before touching the site; expected healing time of the site; a description of possible complications and their signs and symptoms; advice on how to deal with slight redness, pain or swelling; a recommendation to consult with a physician within 24 hours if any signs of infection develop following the procedure; ointment or astringent may be applied to soothe the skin.
- For microneedling, after care instructions may include, but are not limited to: Direction to clean hands immediately before touching the site; expected healing time of the site; a description of possible complications and their signs and symptoms; advice on how to deal with slight redness, pain or swelling; a recommendation to consult with a physician within 24 hours if any signs of infection develop following the procedure; ointment may be applied to help prevent infection.
- Approved disinfectants are prepared and used appropriately, and records maintained
- Fail to fully immerse items in the disinfectant for the appropriate contact time. Operator/PSW must fully immerse items in the disinfectant for the appropriate contact time.
- All items that cannot be cleaned, disinfected or sterilized must be single-use disposable
- Fail to discard single-use disposable items and/or items that cannot be readily cleaned and disinfected or sterilized immediately after each use or when contaminated (e.g. needles, lancets). Operator/PSW must discard single-use items and/or items that cannot be readily cleaned and disinfected or sterilized immediately after each use or when contaminated (e.g. needles, lancets).
- Work and contact surfaces smooth, non-absorbent and easily cleanable
- Re-Inspection
2 infractions
- Work and contact surfaces smooth, non-absorbent and easily cleanable
- Fail to provide fixture and/or furniture in good repair, easily cleanable, smooth and/or impermeable. Operator/PSW must provide fixture and/or furniture in good repair, easily cleanable, smooth and/or impermeable.
- Compliant with requirements for equipment cleaning sinks and reprocessing area
- Fail to have a reprocessing area with a one-way work flow from dirty to clean. Operator/PSW must have a reprocessing area with a one-way work flow from dirty.
- Work and contact surfaces smooth, non-absorbent and easily cleanable
- Routine
8 infractions
- Work and contact surfaces smooth, non-absorbent and easily cleanable
- Fail to provide fixture and/or furniture in good repair, easily cleanable, smooth and/or impermeable. Operator/PSW must provide fixture and/or furniture in good repair, easily cleanable, smooth and/or impermeable.
- Premises and/or work area maintained in a sanitary manner, appropriately located, well-lit and well-ventilated
- Fail to routinely clean premises and/or work area (e.g. cupboards, shelving, sinks, chairs, work stations) daily at a minimum and when visibly soiled. Operator/PSW must routinely clean all structural surfaces (e.g. cupboards, shelving, sinks, chairs, work stations) daily at a minimum and when visibly soiled.
- Compliant with requirements for hand washing sinks
- Fail to provide at least 1 sink for hand washing purposes only. Operator/PSW must provide at least 1 sink for hand washing purposes only.
- Fail to provide single-service hand drying products or hot air dryer close to hand washing sink. If cloth towels are used, they must be single-use, then laundered. Operator/PSW must provide single-service hand drying products or hot air dryer close to hand washing sink. If cloth towels are used, they must be single-use, then laundered.
- Compliant with requirements for equipment cleaning sinks and reprocessing area
- Fail to provide adequate counter space at equipment cleaning sink to prepare equipment for use and reuse. Operator/PSW must provide adequate counter space at equipment cleaning sink to prepare equipment for use and reuse.
- For invasive services an explanation of the procedure, associated risks and appropriate aftercare are provided to clients
- For electrolysis and laser hair removal, aftercare instructions may include, but are not limited to: Direction to clean hands immediately before touching the site; expected healing time of the site; a description of possible complications and their signs and symptoms; advice on how to deal with slight redness, pain or swelling; a recommendation to consult with a physician within 24 hours if any signs of infection develop following the procedure; ointment or astringent may be applied to soothe the skin.
- For microneedling, after care instructions may include, but are not limited to: Direction to clean hands immediately before touching the site; expected healing time of the site; a description of possible complications and their signs and symptoms; advice on how to deal with slight redness, pain or swelling; a recommendation to consult with a physician within 24 hours if any signs of infection develop following the procedure; ointment may be applied to help prevent infection.
- Approved disinfectants are prepared and used appropriately, and records maintained
- Fail to keep high-level disinfectant records with product name, concentration, date prepared and date to be discarded (as applicable). Operator/PSW must keep disinfection records with product name, concentration, date prepared and date to be discarded (as applicable).
- Fail to provide and use low and intermediate-level disinfectants with a Health Canada drug identification number (DIN) or natural product number (NPN). Operator/PSW must provide and use low and intermediate-level disinfectants with a Health Canada drug identification number (DIN) or natural product number (NPN).
- Approved sharps container provided and sharps/sharps container disposed in appropriate manner
- Fail to discard full (i.e. 3/4 of capacity or to fill line) sharps container in an approved manner (e.g. licensed company, pharmacy). Operator/PSW must discard full (i.e. 3/4 of capacity or to fill line) sharps container in an approved manner (e.g. licensed company, pharmacy).
- For invasive procedures, appropriate records are maintained
- Fail to record that verbal and written after-care information was provided. Operator/PSW must record that verbal and written after-care information was provided.
- Work and contact surfaces smooth, non-absorbent and easily cleanable