Skip to content
Loading map…

BURGER KING #505

5720 SOUTH TRANSIT ROAD, LOCKPORT, NY 14094 · Restaurant (Restaurant)

Inspection summary

BURGER KING #505 has been inspected 27 times by New York State Department of Health (NYSDOH) since August 22, 2002. The most recent inspection, on April 1, 2026, recorded 1 infraction.

15 of 27 inspections on record found no infractions at all. In the past 12 months there was 1 inspection with 1 infraction recorded. The higher-risk findings here relate to: Food temperature control and Cleaning and sanitizing.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded 5 times across 5 separate inspections, most recently on August 20, 2019. For example: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 4 times across 3 separate inspections, most recently on August 27, 2025. For example: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions

  • Equipment and utensilsLower risk

    Equipment has to be built from cleanable materials, kept in good repair and stored properly. These findings are mostly about upkeep, like a cracked shelf, a worn gasket or utensils stored the wrong way. They are generally lower risk but show how well the kitchen is maintained.

    Recorded 9 times across 8 separate inspections, most recently on April 1, 2026. For example: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces

  • Building, plumbing and upkeepLower risk

    Floors, walls and ceilings must be smooth and clean, with working lighting, ventilation, plumbing, hot and cold water, and washrooms. These are rarely an immediate food-safety risk on their own, but persistent problems can lead to pest or sanitation issues.

    Recorded 4 times across 4 separate inspections, most recently on August 5, 2020. For example: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans

About this data

These results come from New York State Department of Health (NYSDOH), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

27 inspections

  1. Inspection

    1 infraction

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  2. Inspection

    2 infractions

    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  3. Inspection

    0 infractions

  4. Inspection

    0 infractions

  5. Inspection

    0 infractions

  6. Inspection

    0 infractions

  7. Inspection

    2 infractions

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  8. Inspection

    4 infractions

    • 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
      • Not Critical Violation
    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
    • 8C: Improper use and storage of clean, sanitized equipment and utensils
      • Not Critical Violation
    • 12C: Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
      • Not Critical Violation
  9. Inspection

    0 infractions

  10. Inspection

    0 infractions

  11. Inspection

    1 infraction

    • 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
      • Not Critical Violation
  12. Inspection

    2 infractions

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
    • 6A: Potentially hazardous foods are not kept at or above 140�F during hot holding.
      • Critical Violation
  13. Inspection

    2 infractions

    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
  14. Inspection

    3 infractions

    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  15. Inspection

    2 infractions

    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  16. Inspection

    1 infraction

    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
  17. Inspection

    1 infraction

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  18. Inspection

    0 infractions

  19. Inspection

    1 infraction

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  20. Inspection

    0 infractions

  21. Inspection

    0 infractions

  22. Inspection

    0 infractions

  23. Inspection

    0 infractions

  24. Inspection

    0 infractions

  25. Inspection

    0 infractions

  26. Inspection

    0 infractions

  27. Inspection

    0 infractions

Nearby inspected facilities

Own this business? Add a badge to your website