COUNTRY PRIDE
753 Upper Court STREET, BINGHAMTON, NY 13904 · Restaurant (Restaurant)
53 inspections
- Inspection
0 infractions
- Inspection
1 infraction
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Inspection
2 infractions
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Inspection
1 infraction
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Not Critical Violation
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Inspection
3 infractions
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Inspection
3 infractions
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 8A: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Inspection
2 infractions
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Re-Inspection
0 infractions
- Inspection
6 infractions
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Not Critical Violation
- 12E: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 1H: Food from unapproved source, spoiled, adulterated on premises.
- Critical Violation
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Not Critical Violation
- 1G: Cracked/dirty fresh eggs, liquid or frozen eggs and powdered eggs not pasteurized.
- Critical Violation
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Inspection
4 infractions
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 8A: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Not Critical Violation
- 1G: Cracked/dirty fresh eggs, liquid or frozen eggs and powdered eggs not pasteurized.
- Critical Violation
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Inspection
1 infraction
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Not Critical Violation
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Inspection
3 infractions
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Inspection
2 infractions
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Inspection
2 infractions
- 8F: Improper thawing procedures used
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 8F: Improper thawing procedures used
- Inspection
2 infractions
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 12A: Hot, cold running water not provided, pressure inadequate
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Inspection
5 infractions
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 14A: Insects, rodents present
- Not Critical Violation
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Inspection
3 infractions
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 8A: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Inspection
7 infractions
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 12C: Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Inspection
3 infractions
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Inspection
0 infractions
- Inspection
2 infractions
- 8B: In use food dispensing utensils improperly stored
- Not Critical Violation
- 6A: Potentially hazardous foods are not kept at or above 140�F during hot holding.
- Critical Violation
- 8B: In use food dispensing utensils improperly stored
- Inspection
2 infractions
- 8B: In use food dispensing utensils improperly stored
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 8B: In use food dispensing utensils improperly stored
- Inspection
6 infractions
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 1D: Canned foods found in poor conditions (leakers, severe dents, rusty, swollen cans)
- Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Inspection
4 infractions
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 8A: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Inspection
5 infractions
- 8F: Improper thawing procedures used
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 1D: Canned foods found in poor conditions (leakers, severe dents, rusty, swollen cans)
- Critical Violation
- 8F: Improper thawing procedures used
- Inspection
2 infractions
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Inspection
5 infractions
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 12C: Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Inspection
5 infractions
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 9C: Hair is improperly restrained
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 8A: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Inspection
4 infractions
- 9C: Hair is improperly restrained
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 8A: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 9C: Hair is improperly restrained
- Inspection
2 infractions
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Inspection
3 infractions
- 7F: Precooked, refrigerated potentially hazardous food is not reheated to 165�F or above within two hours.
- Critical Violation
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 7F: Precooked, refrigerated potentially hazardous food is not reheated to 165�F or above within two hours.
- Inspection
8 infractions
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Not Critical Violation
- 8A: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Not Critical Violation
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Not Critical Violation
- 8F: Improper thawing procedures used
- Not Critical Violation
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Inspection
6 infractions
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Not Critical Violation
- 8A: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Inspection
2 infractions
- 12E: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 12E: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Inspection
2 infractions
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 9B: Tobacco is used; eating, drinking in food preparation, dishwashing food storage areas
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Inspection
4 infractions
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 9C: Hair is improperly restrained
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Inspection
3 infractions
- 12D: Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Not Critical Violation
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 12D: Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Inspection
0 infractions
- Re-Inspection
0 infractions
- Inspection
0 infractions
- Inspection
0 infractions
- Inspection
0 infractions
- Inspection
0 infractions
- Inspection
0 infractions
- Re-Inspection
0 infractions
- Inspection
0 infractions
- Inspection
0 infractions
- Re-Inspection
0 infractions
- Inspection
0 infractions
- Re-Inspection
0 infractions
- Re-Inspection
0 infractions
- Inspection
0 infractions
- Inspection
0 infractions