Delta Markham
50 East Valhalla Drive, Markham, ON, L3R 0A3 · Class B
13 inspections
- Compliance Inspection
1 infraction
- pH is within required range
- Fail to maintain pH within range of 7.2 to 7.8
- pH is within required range
- Compliance Inspection
2 infractions
- pH is within required range
- Fail to maintain pH within range of 7.2 to 7.8
- Other tests and records completed and signed
- Fail to ensure water, gravity, and suction outlet covers are inspected at least once in each 30 day operating period
- pH is within required range
- Compliance Inspection
0 infractions
- Compliance Inspection
4 infractions
- Water heater equipped with an operational tamper-proof upper limit cut-off switch
- Fail to ensure upper limit cut-off switch limits maximum temperature of water to 40°C (104°F)
- Hydro-massage jet fittings equipped with timing device
- Fail to ensure timing device can be set to 15 minute maximum
- Deck is clearly delineated from the general area
- Fail to clearly delineate perimeter of pool/spa deck from the general area
- The premise appears to be free from conditions that might be a health hazard
- Fail to maintain facility in safe condition
- Water heater equipped with an operational tamper-proof upper limit cut-off switch
- Re-inspection
0 infractions
- Compliance Inspection
0 infractions
- Re-inspection
2 infractions
- Facility conducts required tests at appropriate intervals, as required
- Fail to manually test TA, pH, FAC, TC or TBr, water clarity and water temperature (Spa, Hot Water Pool) 30 minutes prior to opening
- Fail to check TA, pH, FAC, TC or TBr, water clarity and water temperature (Spa, Hot Water Pool) at least every 4 hours during daily use period where automatic sensing device is used
- Daily records completed and signed
- Fail to record TA, pH, FAC, TC or TBr, water clarity and water temperature (Spa, Hot Water Pool) 30 minutes before opening the facility
- Fail to record TA, pH, FAC, TC or TBr, water clarity and water temperature (Spa, Hot Water Pool) at least every 4 hours during daily use period where automatic sensing device is used
- Facility conducts required tests at appropriate intervals, as required
- Compliance Inspection
9 infractions
- pH is within required range
- Fail to maintain pH within range of 7.2 to 7.8
- Free available chlorine (FAC) residual is within required range
- Fail to maintain free available chlorine (FAC) residual between 0.5 - 10 ppm (Pool, Spray/Splash Pad, Receiving Basin)
- Oxidation Reduction Potential (ORP) value is within range of 600 mV - 900 mV (if equipped with automatic sensing device)
- Fail to maintain ORP value between 600-900 mV
- Facility conducts required tests at appropriate intervals, as required
- Fail to manually test TA, pH, FAC, TC or TBr, water clarity and water temperature (Spa, Hot Water Pool) 30 minutes prior to opening
- Fail to check TA, pH, FAC, TC or TBr, water clarity and water temperature (Spa, Hot Water Pool) at least every 4 hours during daily use period where automatic sensing device is used
- Daily records completed and signed
- Fail to record TA, pH, FAC, TC or TBr, water clarity and water temperature (Spa, Hot Water Pool) 30 minutes before opening the facility
- Fail to record TA, pH, FAC, TC or TBr, water clarity and water temperature (Spa, Hot Water Pool) at least every 4 hours during daily use period where automatic sensing device is used
- Other tests and records completed and signed
- Fail to ensure water, gravity, and suction outlet covers are inspected at least once in each 30 day operating period
- Chemical feeder is provided to administer chlorine, chlorine compound or a bromine compound
- Fail to ensure continuous, 24-hr operation of chemical feeder each day except for necessary stoppage
- Safe storage and handling of all chemicals
- Fail to ensure exposed piping within pool enclosure, inside pool structure, or inside appertenant structure to the pool identified by colour coded bands, or by painting entire outer surface of the piping as required
- The premise appears to be free from conditions that might be a health hazard
- Fail to maintain facility in safe condition
- pH is within required range
- Compliance Inspection
0 infractions
- Compliance Inspection
0 infractions
- Re-inspection
0 infractions
- Compliance Inspection
6 infractions
- Free available chlorine (FAC) residual is within required range
- Oxidation Reduction Potential (ORP) value is within range of 600 mV - 900 mV (if equipped with automatic sensing device)
- Fail to maintain ORP value between 600-900 mV
- Facility conducts required tests at appropriate intervals, as required
- Fail to manually test TA, pH, FAC, TC or TBr, water clarity and water temperature (Spa) every 2 hours during daily use period where automatic sensing device is not used
- Chemical feeder is provided to administer chlorine, chlorine compound or a bromine compound
- Fail to ensure continuous, 24-hr operation of chemical feeder each day except for necessary stoppage
- All components of the facility maintained in proper working order
- Fail to ensure all components of the facility are maintained in proper working order
- The premise appears to be free from conditions that might be a health hazard
- Fail to maintain facility in safe condition
- Compliance Inspection
1 infraction
- Hydro-massage jet fittings equipped with timing device
- Fail to ensure timing device can be set to 15 minute maximum
- Hydro-massage jet fittings equipped with timing device