FIRST UNITED METHODIST CHURCH

Inspection summary

FIRST UNITED METHODIST CHURCH has been inspected 27 times by New York State Department of Health (NYSDOH) since February 8, 2002. The most recent inspection, on February 5, 2026, found no infractions.

17 of 27 inspections on record found no infractions at all. In the past 12 months there was 1 inspection with 0 infractions recorded. The higher-risk findings here relate to: Food temperature control, Handwashing and staff hygiene and Cleaning and sanitizing.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

• Food temperature controlHigher risk

  Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

  Recorded 3 times across 3 separate inspections, most recently on February 5, 2014. For example: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures

• Handwashing and staff hygieneHigher risk

  Hands are the main way germs like norovirus move from people to food. Inspectors look for stocked, accessible handwashing sinks, staff washing hands when required, hair restraints, and sick employees being kept away from food. Gaps here can spread illness quickly.

  Recorded 2 times across 2 separate inspections, most recently on February 12, 2016. For example: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing

• Cleaning and sanitizingHigher risk

  Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

  Recorded once on February 27, 2025. For example: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions

• Protecting food from contaminationHigher risk

  This covers how food is stored, prepared and displayed: raw meat kept away from ready-to-eat food, food covered and stored off the floor, and nothing dripping or splashing into it. Cross-contamination from raw to cooked food is a direct route for salmonella and E. coli.

  Recorded once on February 24, 2021. For example: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)

• Equipment and utensilsLower risk

  Equipment has to be built from cleanable materials, kept in good repair and stored properly. These findings are mostly about upkeep, like a cracked shelf, a worn gasket or utensils stored the wrong way. They are generally lower risk but show how well the kitchen is maintained.

  Recorded 6 times across 5 separate inspections, most recently on February 22, 2024. For example: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)

About this data

These results come from New York State Department of Health (NYSDOH), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

• View the official New York State Department of Health (NYSDOH) disclosure site
• See all inspected facilities in New York State
• How to read an inspection report