Skip to content
Loading map…

GLENMONT ELEMENTARY SCHOOL

328 ROUTE 9W, GLENMONT, NY 12077 · Restaurant (Food Service Establishment)

Inspection summary

GLENMONT ELEMENTARY SCHOOL has been inspected 53 times by New York State Department of Health (NYSDOH) since May 10, 1996. The most recent inspection, on October 6, 2026, found no infractions.

38 of 53 inspections on record found no infractions at all. In the past 12 months there were 2 inspections with 0 infractions recorded. The higher-risk findings here relate to: Cleaning and sanitizing, Handwashing and staff hygiene and Food temperature control.

The last 4 inspections in a row found no infractions. The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 3 times across 3 separate inspections, most recently on March 12, 2024. For example: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions

  • Handwashing and staff hygieneHigher risk

    Hands are the main way germs like norovirus move from people to food. Inspectors look for stocked, accessible handwashing sinks, staff washing hands when required, hair restraints, and sick employees being kept away from food. Gaps here can spread illness quickly.

    Recorded 2 times across 2 separate inspections, most recently on October 4, 2024. For example: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded 2 times across 2 separate inspections, most recently on September 25, 2017. For example: Potentially hazardous foods are not kept at or above 140�F during hot holding.

  • Building, plumbing and upkeepLower risk

    Floors, walls and ceilings must be smooth and clean, with working lighting, ventilation, plumbing, hot and cold water, and washrooms. These are rarely an immediate food-safety risk on their own, but persistent problems can lead to pest or sanitation issues.

    Recorded 5 times across 5 separate inspections, most recently on January 28, 2020. For example: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans

  • Equipment and utensilsLower risk

    Equipment has to be built from cleanable materials, kept in good repair and stored properly. These findings are mostly about upkeep, like a cracked shelf, a worn gasket or utensils stored the wrong way. They are generally lower risk but show how well the kitchen is maintained.

    Recorded 4 times across 4 separate inspections, most recently on February 23, 2015. For example: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)

About this data

These results come from New York State Department of Health (NYSDOH), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

53 inspections

  1. Inspection

    0 infractions

  2. Inspection

    0 infractions

  3. Inspection

    0 infractions

  4. Inspection

    0 infractions

  5. Inspection

    1 infraction

    • 12E: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
      • Not Critical Violation
  6. Inspection

    1 infraction

    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
  7. Inspection

    0 infractions

  8. Inspection

    0 infractions

  9. Inspection

    0 infractions

  10. Inspection

    0 infractions

  11. Inspection

    0 infractions

  12. Inspection

    0 infractions

  13. Inspection

    0 infractions

  14. Inspection

    1 infraction

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  15. Inspection

    0 infractions

  16. Inspection

    0 infractions

  17. Inspection

    0 infractions

  18. Inspection

    1 infraction

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  19. Inspection

    1 infraction

    • 6A: Potentially hazardous foods are not kept at or above 140�F during hot holding.
      • Critical Violation
  20. Inspection

    0 infractions

  21. Inspection

    0 infractions

  22. Inspection

    0 infractions

  23. Inspection

    0 infractions

  24. Inspection

    2 infractions

    • 5E: Enough refrigerated storage equipment is not present, properly designed, maintained or operated so that all potentially hazardous foods are cooled properly and stored below 45�F as required.
      • Critical Violation
    • 3C: Food workers do not use proper utensils to eliminate bare hand contact with cooked or prepared foods.
      • Critical Violation
  25. Inspection

    1 infraction

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  26. Inspection

    1 infraction

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  27. Inspection

    0 infractions

  28. Inspection

    0 infractions

  29. Inspection

    0 infractions

  30. Inspection

    1 infraction

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  31. Inspection

    0 infractions

  32. Inspection

    1 infraction

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  33. Inspection

    1 infraction

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  34. Inspection

    0 infractions

  35. Inspection

    0 infractions

  36. Inspection

    0 infractions

  37. Inspection

    1 infraction

    • 16: Miscellaneous, Economic Violation, Choking Poster, Training.
      • Not Critical Violation
  38. Inspection

    0 infractions

  39. Inspection

    1 infraction

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  40. Inspection

    0 infractions

  41. Inspection

    0 infractions

  42. Inspection

    2 infractions

    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  43. Inspection

    1 infraction

    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
  44. Inspection

    0 infractions

  45. Inspection

    0 infractions

  46. Inspection

    0 infractions

  47. Inspection

    0 infractions

  48. Inspection

    0 infractions

  49. Inspection

    0 infractions

  50. Inspection

    0 infractions

  51. Inspection

    0 infractions

  52. Inspection

    0 infractions

  53. Inspection

    0 infractions

Nearby inspected facilities

Own this business? Add a badge to your website