LUCIEN
14 1 AVENUE, Manhattan, NY 10009 · Restaurant (French)
5 inspections
- Cycle Inspection / Re-inspection
4 infractions
- 08A: Establishment is not free of harborage or conditions conducive to rodents, insects or other pests.
- Not Critical
- 04K: Evidence of rats or live rats in establishment's food or non-food areas.
- Critical
- 09C: Design, construction, materials used or maintenance of food contact surface improper. Surface not easily cleanable, sanitized and maintained.
- Not Critical
- 10F: Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
- Not Critical
- 08A: Establishment is not free of harborage or conditions conducive to rodents, insects or other pests.
- Cycle Inspection / Initial Inspection
2 infractions
- 02H: After cooking or removal from hot holding, TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours, and from 70 °F to 41 °F or less within 4 additional hours.
- Critical
- 02G: Cold TCS food item held above 41 °F; smoked or processed fish held above 38 °F; intact raw eggs held above 45 °F; or reduced oxygen packaged (ROP) TCS foods held above required temperatures except during active necessary preparation.
- Critical
- 02H: After cooking or removal from hot holding, TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours, and from 70 °F to 41 °F or less within 4 additional hours.
- Cycle Inspection / Initial Inspection
2 infractions
- 10G: Dishwashing and ware washing: Cleaning and sanitizing of tableware, including dishes, utensils, and equipment deficient.
- Not Critical
- 04H: Raw, cooked or prepared food is adulterated, contaminated, cross-contaminated, or not discarded in accordance with HACCP plan.
- Critical
- 10G: Dishwashing and ware washing: Cleaning and sanitizing of tableware, including dishes, utensils, and equipment deficient.
- Cycle Inspection / Re-inspection
1 infraction
- 04C: Food worker does not use proper utensil to eliminate bare hand contact with food that will not receive adequate additional heat treatment.
- Critical
- 04C: Food worker does not use proper utensil to eliminate bare hand contact with food that will not receive adequate additional heat treatment.
- Cycle Inspection / Initial Inspection
4 infractions
- 05D: Hand washing facility not provided in or near food preparation area and toilet room. Hot and cold running water at adequate pressure to enable cleanliness of employees not provided at facility. Soap and an acceptable hand-drying device not provided.
- Critical
- 08A: Facility not vermin proof. Harborage or conditions conducive to attracting vermin to the premises and/or allowing vermin to exist.
- Not Critical
- 04J: Appropriately scaled metal stem-type thermometer or thermocouple not provided or used to evaluate temperatures of potentially hazardous foods during cooking, cooling, reheating and holding.
- Critical
- 04K: Evidence of rats or live rats present in facility's food and/or non-food areas.
- Critical
- 05D: Hand washing facility not provided in or near food preparation area and toilet room. Hot and cold running water at adequate pressure to enable cleanliness of employees not provided at facility. Soap and an acceptable hand-drying device not provided.