Skip to content
Loading map…

MARCHE DRUMMOND (JOE'S PANINI)

1404 Rue Drummond, Montréal, Québec, Montréal · Casse-croûte

Official record from Montréal →

Inspection summary

MARCHE DRUMMOND (JOE'S PANINI) has been inspected 13 times by Ville de Montréal since August 16, 2019. The most recent inspection, on April 22, 2025, recorded 1 infraction.

None of the 13 inspections on record were free of infractions. No inspections are on record from the past 12 months. The higher-risk findings here relate to: Food temperature control and Food source, labelling and allergens.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded 10 times across 10 separate inspections, most recently on April 22, 2025. For example: The heat-alterable product with the exception of whole fresh fruit and vegetables must be cooled without delay and kept constantly at an internal and ambient temperature not exceeding 4C until it is delivered to the consumer, except for the time required for the application of a manufacturing process or treatment recognized in the food industry and requiring a higher temperature.

  • Food source, labelling and allergensHigher risk

    Food must come from approved suppliers, stay in labelled containers and be thrown out when it is spoiled or damaged, such as dented or swollen cans. Labelling matters for allergies: an unlabelled container can hide an allergen.

    Recorded 3 times across 3 separate inspections, most recently on August 25, 2021. For example: The places, vehicles, equipment, materials and utensils used in preparation for packaging, storage, transport, labelling and service of products, as well as other sanitary facilities and premises, shall be clean.

  • Equipment and utensilsLower risk

    Equipment has to be built from cleanable materials, kept in good repair and stored properly. These findings are mostly about upkeep, like a cracked shelf, a worn gasket or utensils stored the wrong way. They are generally lower risk but show how well the kitchen is maintained.

    Recorded once on September 28, 2023. For example: The following single-use items are not permitted in an establishment to be distributed on site, for transport or by delivery: tray #6, Plate #6, Container and lid #6, Cup or glass cover #6, Cup or glass cover, Stick, Straw, Ustensile #1, #2, ,3, #4, #5, #6, #7.

About this data

These results come from Ville de Montréal, which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

13 inspections

  1. Inspection

    1 infraction

    • The heat-alterable product with the exception of whole fresh fruit and vegetables must be cooled without delay and kept constantly at an internal and ambient temperature not exceeding 4C until it is delivered to the consumer, except for the time required for the application of a manufacturing process or treatment recognized in the food industry and requiring a higher temperature.
  2. Inspection

    1 infraction

    • The heat-alterable product with the exception of whole fresh fruit and vegetables must be cooled without delay and kept constantly at an internal and ambient temperature not exceeding 4C until it is delivered to the consumer, except for the time required for the application of a manufacturing process or treatment recognized in the food industry and requiring a higher temperature.
  3. Inspection

    1 infraction

    • The perishable product sold hot or served hot to the consumer must be kept at an internal temperature of at least 60C until delivered.
  4. Inspection

    1 infraction

    • The heat-alterable product with the exception of whole fresh fruit and vegetables must be cooled without delay and kept constantly at an internal and ambient temperature not exceeding 4C until it is delivered to the consumer, except for the time required for the application of a manufacturing process or treatment recognized in the food industry and requiring a higher temperature.
  5. Inspection

    1 infraction

    • The following single-use items are not permitted in an establishment to be distributed on site, for transport or by delivery: tray #6, Plate #6, Container and lid #6, Cup or glass cover #6, Cup or glass cover, Stick, Straw, Ustensile #1, #2, ,3, #4, #5, #6, #7.
  6. Inspection

    1 infraction

    • The heat-alterable product with the exception of whole fresh fruit and vegetables must be cooled without delay and kept constantly at an internal and ambient temperature not exceeding 4C until it is delivered to the consumer, except for the time required for the application of a manufacturing process or treatment recognized in the food industry and requiring a higher temperature.
  7. Inspection

    1 infraction

    • The heat-alterable product with the exception of whole fresh fruit and vegetables must be cooled without delay and kept constantly at an internal and ambient temperature not exceeding 4C until it is delivered to the consumer, except for the time required for the application of a manufacturing process or treatment recognized in the food industry and requiring a higher temperature.
  8. Inspection

    1 infraction

    • The heat-alterable product with the exception of whole fresh fruit and vegetables must be cooled without delay and kept constantly at an internal and ambient temperature not exceeding 4C until it is delivered to the consumer, except for the time required for the application of a manufacturing process or treatment recognized in the food industry and requiring a higher temperature.
  9. Inspection

    2 infractions

    • The heat-alterable product with the exception of whole fresh fruit and vegetables must be cooled without delay and kept constantly at an internal and ambient temperature not exceeding 4C until it is delivered to the consumer, except for the time required for the application of a manufacturing process or treatment recognized in the food industry and requiring a higher temperature.
    • The places, vehicles, equipment, materials and utensils used in preparation for packaging, storage, transport, labelling and service of products, as well as other sanitary facilities and premises, shall be clean.
  10. Inspection

    1 infraction

    • The places, vehicles, equipment, materials and utensils used in preparation for packaging, storage, transport, labelling and service of products, as well as other sanitary facilities and premises, shall be clean.
  11. Inspection

    1 infraction

    • The places, vehicles, equipment, materials and utensils used in preparation for packaging, storage, transport, labelling and service of products, as well as other sanitary facilities and premises, shall be clean.
  12. Inspection

    1 infraction

    • The heat-alterable product with the exception of whole fresh fruit and vegetables must be cooled without delay and kept constantly at an internal and ambient temperature not exceeding 4C until it is delivered to the consumer, except for the time required for the application of a manufacturing process or treatment recognized in the food industry and requiring a higher temperature.
  13. Inspection

    1 infraction

    • The heat-alterable product with the exception of whole fresh fruit and vegetables must be cooled without delay and kept constantly at an internal and ambient temperature not exceeding 4C until it is delivered to the consumer, except for the time required for the application of a manufacturing process or treatment recognized in the food industry and requiring a higher temperature.

Nearby inspected facilities

Own this business? Add a badge to your website