Skip to content
Loading map…

Mario's Salon

5025 52 Avenue Beaumont AB T4X 1E5 · Personal Services

7 inspections

  1. Monitoring Inspection

    1 infraction

    • 20. Is reusable equipment disinfected properly?
      • Used combs were being placed in Barbicide without prior cleaning. The operator was instructed on the correct reprocessing protocol: combs must first be washed with soapy water to remove all organic matter and oils, then dried thoroughly before immersion in the disinfectant solution
  2. Risk Management Inspection

    0 infractions

  3. Risk Management Inspection

    1 infraction

    • 20. Is reusable equipment disinfected properly?
      • - High-level disinfectant test strips were not observed.* Obtain high level disinfectant test strips. Use the high-level disinfectant testing log sheet provided during inspection to keep logs. Poured high-level disinfectant must be tested each day used and records kept. Ensure you follow the manufacturer's instructions.
  4. Risk Management Inspection

    2 infractions

    • 03. Are facility-specific written procedures established to adequately describe safe and sanitary practices?
      • The required written procedures were not observed during inspection. Please create written procedures as it applies to your operations (procedure for skin cleansing during waxing and procedure for client care in an event of accidental skin cut or puncture). Page 2 & 5 of the written procedures provided during inspection.
    • 20. Is reusable equipment disinfected properly?
      • - Semi-critical tools such as tweezers were being disinfected with Barbicide.* Please note that a high-level disinfectant is required to disinfect semi-critical tools.- Observed high level disinfectant (Preempt CS20) had expired.* Obtain a new bottle.- High-level disinfectant test strips were not observed.* Obtain high level disinfectant test strips. Use the high-level disinfectant testing log sheet provided during inspection to keep logs. Poured high-level disinfectant must be tested each day used and records kept. Ensure you follow the manufacturer's instructions.
  5. Monitoring Inspection

    0 infractions

  6. Risk Management Inspection

    0 infractions

  7. Monitoring Inspection

    1 infraction

    • 20. Is reusable equipment disinfected properly?
      • **The operators at the barbering station are disinfecting the combs and scissors in the barbicide without first washing them. The operator was educated on the proper steps in reprocessing used tools** In the eyelash extension room, there are no test strips for the PREempt CS20- The eyelash operator is following the proper steps in reprocessing tools and she is familiar with the MIFU for the CS20.ACTION REQUIRED1) At the barbering and hairstyling stations, ensure that all combs and scissors are washed with soapy water and dried before they go into the barbicide.2) In the Eyelash extension room, purchase test strips for the CS20 nd keep logs for CS20