Skip to content
Loading map…

MR. KING

803A FLATBUSH AVENUE, Brooklyn, NY 11226 · Restaurant (Chinese)

4 inspections

  1. Cycle Inspection / Initial Inspection

    4 infractions

    • 10D: Mechanical or natural ventilation not provided, inadequate, improperly installed, in disrepair or fails to prevent and control excessive build-up of grease, heat, steam condensation, vapors, odors, smoke or fumes.
      • Not Critical
    • 06C: Food, supplies, or equipment not protected from potential source of contamination during storage, preparation, transportation, display, service or from customer’s refillable, reusable container. Condiments not in single-service containers or dispensed directly by the vendor.
      • Critical
    • 09A: Swollen, leaking, rusted or otherwise damaged canned food to be returned to distributor not segregated from intact product and clearly labeled DO NOT USE
      • Not Critical
    • 10F: Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
      • Not Critical
  2. Cycle Inspection / Re-inspection

    2 infractions

    • 09B: Thawing procedure improper.
      • Not Critical
    • 02B: Hot TCS food item not held at or above 140 °F.
      • Critical
  3. Cycle Inspection / Initial Inspection

    8 infractions

    • 04C: Food worker/food vendor does not use utensil or other barrier to eliminate bare hand contact with food that will not receive adequate additional heat treatment.
      • Critical
    • 02B: Hot TCS food item not held at or above 140 °F.
      • Critical
    • 02G: Cold TCS food item held above 41 °F; smoked or processed fish held above 38 °F; intact raw eggs held above 45 °F; or reduced oxygen packaged (ROP) TCS foods held above required temperatures except during active necessary preparation.
      • Critical
    • 02H: After cooking or removal from hot holding, TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours, and from 70 °F to 41 °F or less within 4 additional hours.
      • Critical
    • 09C: Design, construction, materials used or maintenance of food contact surface improper. Surface not easily cleanable, sanitized and maintained.
      • Not Critical
    • 10B: Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.
      • Not Critical
    • 06D: Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.
      • Critical
    • 05F: Insufficient or no hot holding, cold storage or cold holding equipment provided to maintain Time/Temperature Control for Safety Foods (TCS) at required temperatures
      • Critical
  4. Cycle Inspection / Re-inspection

    2 infractions

    • 10F: Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
      • Not Critical
    • 02B: Hot TCS food item not held at or above 140 °F.
      • Critical