One Eyed Jack's Pub & Grill
33 Taunton Rd W, Oshawa Ontario L1G 7B4 · Food Safety Inspections
8 inspections
- Routine
2 infractions
- Hot holding of potentially hazardous food: minimum of 60°C (140°F) after cooking / rapid re-heating
- * Fail to hold potentially hazardous food at 60°C (140°F) or higher after cooking / rapid re-heating
- Operator to ensure potentially hazardous foods are held at 60°C (140°F) or higher after cooking/rapid reheating
- Food protected from potential contamination and/or adulteration
- * Observed ready-to-eat foods not separate from raw food preparation surfaces and utensils to prevent contamination
- Operator to ensure cooked and ready-to-eat foods are separated and above raw foods when handled or stored
- Hot holding of potentially hazardous food: minimum of 60°C (140°F) after cooking / rapid re-heating
- Re-Inspection
0 infractions
- Routine
3 infractions
- Potentially hazardous food is held at 4°C (40°F) or lower
- * Fail to ensure potentially hazardous foods are held at 4°C (40°F) or less
- Operator to ensure potentially hazardous foods are held at 4°C (40°F) or lower
- Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
- * Fail to provide adequate supplies (single-use towels, soap in a dispenser) for the hand washing basin in the food preparation area
- Operator to ensure hand washing basins are adequately supplied
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to adjust or repair the malfunctioning cooler immediately. Do not store any potentially hazardous foods in the malfunctioning unit until it is able to maintain hazardous foods at 4° C or lower
- Potentially hazardous food is held at 4°C (40°F) or lower
- Re-Inspection
0 infractions
- Routine
3 infractions
- Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
- * Fail to provide hot and cold water for hand washing in food preparation area
- Operator to ensure hand washing basins are adequately supplied
- Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)
- * Fail to use equipment/utensils/dishes/food containers/multi-service articles in good repair (i.e. free from cracks/crevices/chips/open seams)
- Operator to ensure all food contact surfaces, utensils and/or multi-service articles are cleaned and sanitized after each use and are maintained in good repair
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to adjust or repair the malfunctioning cooler immediately. Do not store any potentially hazardous foods in the malfunctioning unit until it is able to maintain hazardous foods at 4° C or lower
- Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
- Routine
2 infractions
- Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)
- * Fail to use equipment/utensils/dishes/food containers/multi-service articles in good repair (i.e. free from cracks/crevices/chips/open seams)
- Operator to ensure all food contact surfaces, utensils and/or multi-service articles are cleaned and sanitized after each use and are maintained in good repair
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to adjust or repair the malfunctioning cooler immediately. Do not store any potentially hazardous foods in the malfunctioning unit until it is able to maintain hazardous foods at 4° C or lower
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)
- Routine
3 infractions
- Hot holding of potentially hazardous food: minimum of 60°C (140°F) after cooking / rapid re-heating
- * Fail to hold potentially hazardous food at 60°C (140°F) or higher after cooking / rapid re-heating
- Operator to ensure potentially hazardous foods are held at 60°C (140°F) or higher after cooking/rapid reheating
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are of sound and tight construction
- Operator to ensure that all equipment/non-food contact surfaces are readily cleanable/non-absorbent and of sound and tight construction.
- Sanitary maintenance of and provision of required supplies in staff / public washroom facilities
- * Fail to equip facility with hot and cold running water
- Operator to ensure the washroom facilities are properly supplied with soap/detergent, single-service towels or hot air dryer, toilet paper and hot and cold running water
- Hot holding of potentially hazardous food: minimum of 60°C (140°F) after cooking / rapid re-heating
- Routine
3 infractions
- Potentially hazardous food is held at 4°C (40°F) or lower
- * Fail to ensure potentially hazardous foods are held at 4°C (40°F) or less
- Operator to ensure potentially hazardous foods are held at 4°C (40°F) or lower
- Food protected from potential contamination and/or adulteration
- * Observed potentially hazardous food not covered to prevent contamination / adulteration
- * Observed ready-to-eat foods not separate from raw food preparation surfaces and utensils to prevent contamination
- Operator to ensure cooked and ready-to-eat foods are separated and above raw foods when handled or stored
- Operator to ensure all foods are covered in storage
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Potentially hazardous food is held at 4°C (40°F) or lower