Patty Gyal
5 41 Harwood Ave S, Ajax ON L1S 2B8 · Food Safety Inspections
7 inspections
- Complaint
4 infractions
- Separate hand washing basin provided for food handlers
- * Fail to provide hand washing basin in food preparation area
- Operator to ensure a designated hand washing basin is provided and/or accessible in each food preparation area
- Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
- * Fail to provide adequate supplies (single-use towels, soap in a dispenser) for the hand washing basin in the food preparation area
- Operator to ensure hand washing basins are adequately supplied
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Adequate protection against the entrance of insects, vermin, and rodents
- * Evidence of pests observed
- Operator to ensure storage areas are maintained clean and organized to facilitate the monitoring of pest control
- Operator to ensure food premise shall be protected against the entry of pest
- Separate hand washing basin provided for food handlers
- Routine
3 infractions
- Minimum of 1 Certified Food Handler per hour of operation?
- * Fail to provide proof of a certified food handler certificate
- Operator to provide proof of a certified food handler certificate
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Floors clean and in good repair
- * Fail to ensure floors of food premise are kept clean and/or in good repair
- Operator to ensure floors are kept clean and in good repair
- Minimum of 1 Certified Food Handler per hour of operation?
- Routine
3 infractions
- Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
- * Fail to provide adequate supplies (single-use towels, soap in a dispenser) for the hand washing basin in the food preparation area
- Operator to ensure hand washing basins are adequately supplied
- Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)
- * Fail to maintain utensils, multi-service articles and/or food contact surfaces in a clean and sanitary manner and/or in good repair
- * Fail to use equipment/utensils/dishes/food containers/multi-service articles in good repair (i.e. free from cracks/crevices/chips/open seams)
- Operator to ensure all food contact surfaces/equipment/utensils/multi-service articles are made of materials that can be readily cleaned and sanitized
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to adjust or repair the malfunctioning cooler immediately. Do not store any potentially hazardous foods in the malfunctioning unit until it is able to maintain hazardous foods at 4° C or lower
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
- Routine
3 infractions
- Potentially hazardous food is held at 4°C (40°F) or lower
- * Fail to ensure potentially hazardous foods are held at 4°C (40°F) or less
- Potentially hazardous foods observed at an internal temperature above 4° C (40°F)
- Food protected from potential contamination and/or adulteration
- * Observed potentially hazardous food not covered to prevent contamination / adulteration
- Operator to ensure all foods are covered in storage
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Potentially hazardous food is held at 4°C (40°F) or lower
- Routine
2 infractions
- Washing hands thoroughly before and after handling food
- * Food handlers fail to wash hands as often as necessary to prevent the contamination of food or food areas
- Food handlers must wash hands after they are contaminated and before handling food
- Separate hand washing basin provided for food handlers
- * Fail to ensure hand washing basin is easily accessible
- Operator to ensure a designated hand washing basin is provided and/or accessible in each food preparation area
- Washing hands thoroughly before and after handling food
- Re-Inspection
0 infractions
- Routine
4 infractions
- Thermometers used to verify food preparation and storage temperatures
- * Fail to provide thermometer in temperature controlled room / equipment used to store potentially hazardous foods
- Operator to provide accurate and easily readable indicating thermometers in temperature controlled rooms/equipment used for storage of potentially hazardous foods
- Food protected from potential contamination and/or adulteration
- * Observed potentially hazardous food not covered to prevent contamination / adulteration
- Operator to ensure all foods are covered in storage
- All foods at the premises are from an inspected source
- * Fail to ensure food offered for sale or used for preparation is from an approved / inspected source
- Operator to use food only from approved / inspected sources
- Manual dishwashing: Wash, rinse, sanitize technique
- * Fail to use proper wash/rinse/sanitize technique
- Operator to ensure the proper wash/rinse/sanitize dishwashing technique is applied
- Thermometers used to verify food preparation and storage temperatures