Pizzadelic Clayton Park
7 LANGBRAE, HALIFAX · Food Establishment
12 inspections
- Inspection
1 infraction
- 29(3) A food establishment must provide facilities and equipment to implement the maintenance, cleaning and sanitation program and must identify in their program the cleaning and sanitizing agents used in the food establishment, including their concentration and uses.
- Test strips required to determine the strength of any chemical used as the sanitizing agent when manual dishwashing and/or surface sanitization.
- 29(3) A food establishment must provide facilities and equipment to implement the maintenance, cleaning and sanitation program and must identify in their program the cleaning and sanitizing agents used in the food establishment, including their concentration and uses.
- Inspection
0 infractions
- Inspection
3 infractions
- 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to
(b) allow adequate cleaning, sanitizing and maintenance.
- In accordance with Section 4.1 of the NS Food Retail and Food Services Code, you must ensure all equipment is maintained and functional for its intended use. Repair prep fridge, water pooling in fridge at time of inspection.
- 29(3) A food establishment must provide facilities and equipment to implement the maintenance, cleaning and sanitation program and must identify in their program the cleaning and sanitizing agents used in the food establishment, including their concentration and uses.
- Test strips required to determine the strength of any chemical used as the sanitizing agent when manual dishwashing and/or surface sanitization.
- 33(2) The operator must ensure that all refrigeration and heat-holding equipment has a temperature measuring device that is accurate and in good repair.
- In accordance with Section 4.1.11 of the Nova Scotia Food Services and Food Retail Code, you must: have a functioning thermometer(s) on all cooling equipment. Two fridges require thermometers.
- 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to
(b) allow adequate cleaning, sanitizing and maintenance.
- Inspection
1 infraction
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are constructed of finishes which are smooth, impermeable, and washable. In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must ensure storage areas are constructed of materials which are durable and easily cleaned. Painting required throughout back area of kitchen.
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- Inspection
3 infractions
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are constructed of finishes which are smooth, impermeable, and washable. In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must ensure storage areas are constructed of materials which are durable and easily cleaned. Painting required throughout back area of kitchen.
- 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator:
(b) adequately designed and appropriately located hand-washing facilities;
- Do not shut off the cold water valve, hot and cold water must be supplied to the handwashing sink. Paper towel dispenser required at handwashing sink.
- 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to
(b) allow adequate cleaning, sanitizing and maintenance.
- In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must: Ensure staff follow proper manual dishwashing (wash, rinse, sanitize and then air dry) Supply adequate shelving in order that all materials may be stored off the floor and properly air dried. Test strips required to determine the strength of any chemical used as the sanitizing agent when manual dishwashing.
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- Inspection
5 infractions
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are constructed of finishes which are smooth, impermeable, and washable. Fill holes throughout facility. In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must ensure storage areas are constructed of materials which are durable and easily cleaned.
- 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator:
(b) adequately designed and appropriately located hand-washing facilities;
- Do not shut off the cold water valve, hot and cold water must be supplied to the handwashing sink. Paper towel dispenser required at handwashing sink.
- 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to
(b) allow adequate cleaning, sanitizing and maintenance.
- In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must: Ensure staff follow proper manual dishwashing (wash, rinse, sanitize and then air dry) Supply adequate shelving in order that all materials may be stored off the floor and properly air dried. Test strips required to determine the strength of any chemical used as the sanitizing agent when manual dishwashing.
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;
- In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris.
- 33(2) The operator must ensure that all refrigeration and heat-holding equipment has a temperature measuring device that is accurate and in good repair.
- Refrigeration units require thermometers. Pizza hot holding unit require thermometer.
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- Inspection
5 infractions
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are constructed of finishes which are smooth, impermeable, and washable. Fill holes throughout facility. In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must ensure storage areas are constructed of materials which are durable and easily cleaned.
- 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator:
(b) adequately designed and appropriately located hand-washing facilities;
- Do not shut off the cold water valve, hot and cold water must be supplied to the handwashing sink. Paper towel dispenser required at handwashing sink.
- 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to
(b) allow adequate cleaning, sanitizing and maintenance.
- In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must: Ensure staff follow proper manual dishwashing (wash, rinse, sanitize and then air dry) Supply adequate shelving in order that all materials may be stored off the floor and properly air dried.
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;
- In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris.
- 33(2) The operator must ensure that all refrigeration and heat-holding equipment has a temperature measuring device that is accurate and in good repair.
- Refrigeration units require thermometers. Pizza hot holding unit require thermometer.
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- Inspection
1 infraction
- 9(a) An operator must renew a permit, other than a temporary permit, on or before the expiry date by submitting a completed renewal application to the Minister on a form approved by the Administrator together with all of the following:
(a) the applicable fee prescribed in Section 5;
- Renew permit as soon as possible.
- 9(a) An operator must renew a permit, other than a temporary permit, on or before the expiry date by submitting a completed renewal application to the Minister on a form approved by the Administrator together with all of the following:
(a) the applicable fee prescribed in Section 5;
- Inspection
0 infractions
- Inspection
2 infractions
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;
- In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris.
- 9(b) An operator must renew a permit, other than a temporary permit, on or before the expiry date by submitting a completed renewal application to the Minister on a form approved by the Administrator together with all of the following:
(b) any reasonable information as required.
- Renew eating establishment permit.
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;
- Inspection
0 infractions
- Inspection
1 infraction
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are constructed of finishes which are smooth, impermeable, and washable. In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must ensure storage areas are constructed of materials which are durable and easily cleaned. Painting required throughout facility.
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;