Skip to content
Loading map…

Ramada by Wyndham Pincher Creek - Whirlpool

1132 Table Mountain Street Pincher Creek AB T0K 1W0 · Aquatic Facility

14 inspections

  1. Demand Inspection

    0 infractions

  2. Monitoring Inspection

    1 infraction

    • 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
      • Several suction outlet (drain) screws were very rusty. Reportedly a technician had put them in accidentally. Operator was aware and planned to change at the next drain (dumped during inspection).
  3. Demand Inspection

    0 infractions

  4. Risk Management Inspection

    0 infractions

  5. Risk Management Inspection

    1 infraction

    • 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
      • *Suction outlets (drains) expired in May, 2025. An email showed that covers were ordered Sept.19.Operator to carefully monitor the covers, check condition each draining and daily, and order new ones immediately.
  6. Monitoring Inspection

    1 infraction

    • 12. Are the general safety devices and physical conditions in this pool providing a safe environment (Critical)?
      • *Suction outlets (drains) expired in May, 2025. Operated stated they had no known problems; they appeared in good condition from the deck. Operator to carefully monitor the covers, check condition each draining and daily, and order new ones immediately.
  7. Risk Management Inspection

    0 infractions

  8. Risk Management Inspection

    1 infraction

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Operator attempted to repair the circ pump flow meter but it still reportedly didn't work (pump was off at the time).
  9. Monitoring Inspection

    1 infraction

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • Circ pump flow meter was jammed. Operator was going to try using the controller to measure flow rate.
  10. Demand Inspection

    0 infractions

  11. Demand Inspection

    0 infractions

  12. Demand Inspection

    0 infractions

  13. Monitoring Inspection

    0 infractions

  14. Monitoring Inspection

    0 infractions