Skip to content
Loading map…

SNAPPY TOMATO PIZZA

1283 BARRINGTON, HALIFAX · Food Establishment

9 inspections

  1. Inspection

    0 infractions

  2. Inspection

    1 infraction

    • 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:  (c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
      • In accordance with Section 2.4.2 of the NS Food Retail and Food Services Code, you must ensure all floors are durable, easily cleanable and non-slip and are constructed of finishes which are smooth, impermeable, and washable. All damaged floor tiles must be repaired or replaced.
  3. Inspection

    4 infractions

    • 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:  (c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
      • In accordance with Section 4.6 of the NS Food Retail and Food Services Code, you must ensure all surfaces such as floors, walls and ceilings are cleaned at a frequency that will prevent accumulation of dust, dirt and debris. Remove old spray foam, clean all areas and replace with new spray foam.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests. New door sweep required on back door. Remove any items or equipment not being used. Large amount of items in stainless steel cabinet that can cause harborage for rodents.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.3 of the NS Food Retail and Food Services Code, you must: a. ensure food contact surfaces of cooking equipment are cleaned and sanitized at a frequency that prevents the accumulation of grease deposits and other residues. Rodent droppings found under and inside of dough machine, along dough mixer and inside stainless steel cabinets. All areas must be cleaned and sanitized.
    • 29(3) A food establishment must provide facilities and equipment to implement the maintenance, cleaning and sanitation program and must identify in their program the cleaning and sanitizing agents used in the food establishment, including their concentration and uses.
      • Test strips required to determine the strength of any chemical used as the sanitizing agent when manual dishwashing.
  4. Inspection

    1 infraction

    • 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:  (c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
      • In accordance with Section 2.4.2 of the NS Food Retail and Food Services Code, you must ensure all floors are durable, easily cleanable and non-slip and are constructed of finishes which are smooth, impermeable, and washable. All damaged floor tiles must be repaired or replaced.
  5. Inspection

    3 infractions

    • 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:  (c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
      • In accordance with Section 2.4.2 of the NS Food Retail and Food Services Code, you must ensure all floors are durable, easily cleanable and non-slip and are constructed of finishes which are smooth, impermeable, and washable. All damaged floor tiles must be repaired or replaced.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must ensure: all shelving and food is maintained a minimum of 15 cm (6 inches) off the floor; storage areas are located in a dry, pest-free location. In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests. Repair screen door and ensure all windows if left open are screened.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure: Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods. Cleaning required, pest droppings observed on shelving, area around mixer, in staff washroom.
  6. Inspection

    0 infractions

  7. Inspection

    3 infractions

    • 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:  (c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
      • In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must ensure storage areas are constructed of materials which are durable and easily cleaned. In accordance with Section 4.6 of the NS Food Retail and Food Services Code, you must ensure all surfaces such as floors, walls and ceilings are cleaned at a frequency that will prevent accumulation of dust, dirt and debris.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must: store all food and food items a minimum of 15 cm (6 in.) off the floor on racks, shelves or pallets; store all food and food items a minimum of 5 cm (2 in.) from the walls. In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must immediately remove any equipment or items not being used from the food storage area.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. In accordance with Section 4.2.3 of the NS Food Retail and Food Services Code, you must: a. ensure food contact surfaces of cooking equipment are cleaned and sanitized at a frequency that prevents the accumulation of grease deposits and other residues.
  8. Inspection

    0 infractions

  9. Inspection

    2 infractions

    • 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:  (c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
      • In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are constructed of finishes which are smooth, impermeable, and washable. Painting required of all wood under main counter and wood by mixer.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • In accordance with Section 4.3.2 of the NS Food Retail and Food Services Code, you must ensure: a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly. c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects. d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.