Skip to content
Loading map…

SOMERS H.S.

120 PRIMROSE STREET, LINCOLNDALE, NY 10540 · Restaurant (School K-12 Food Service)

Inspection summary

SOMERS H.S. has been inspected 36 times by New York State Department of Health (NYSDOH) since March 30, 2004. The most recent inspection, on February 12, 2026, found no infractions.

16 of 36 inspections on record found no infractions at all. In the past 12 months there was 1 inspection with 0 infractions recorded. The higher-risk findings here relate to: Pests, Cleaning and sanitizing and Food temperature control.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • PestsHigher risk

    Signs of mice, rats, cockroaches or flies, or gaps and clutter that let them get in or hide. Pests carry bacteria and can contaminate food and surfaces, so evidence of activity is treated seriously and usually triggers a follow-up visit.

    Recorded 5 times across 4 separate inspections, most recently on September 21, 2023. For example: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 4 times across 4 separate inspections, most recently on March 12, 2025. For example: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded once on December 7, 2018. For example: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures

  • Equipment and utensilsLower risk

    Equipment has to be built from cleanable materials, kept in good repair and stored properly. These findings are mostly about upkeep, like a cracked shelf, a worn gasket or utensils stored the wrong way. They are generally lower risk but show how well the kitchen is maintained.

    Recorded 25 times across 19 separate inspections, most recently on September 10, 2025. For example: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces

  • Building, plumbing and upkeepLower risk

    Floors, walls and ceilings must be smooth and clean, with working lighting, ventilation, plumbing, hot and cold water, and washrooms. These are rarely an immediate food-safety risk on their own, but persistent problems can lead to pest or sanitation issues.

    Recorded 6 times across 6 separate inspections, most recently on March 31, 2022. For example: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans

About this data

These results come from New York State Department of Health (NYSDOH), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

36 inspections

  1. Inspection

    0 infractions

  2. Inspection

    2 infractions

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
    • 16: Miscellaneous, Economic Violation, Choking Poster, Training.
      • Not Critical Violation
  3. Inspection

    2 infractions

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
  4. Inspection

    1 infraction

    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
  5. Inspection

    2 infractions

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
    • 8D: Single service items reused, improperly stored, dispensed, not used when required
      • Not Critical Violation
  6. Inspection

    4 infractions

    • 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
      • Not Critical Violation
    • 14A: Insects, rodents present
      • Not Critical Violation
    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
    • 16: Miscellaneous, Economic Violation, Choking Poster, Training.
      • Not Critical Violation
  7. Inspection

    1 infraction

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  8. Inspection

    0 infractions

  9. Inspection

    0 infractions

  10. Inspection

    1 infraction

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  11. Inspection

    2 infractions

    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
  12. Inspection

    3 infractions

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  13. Inspection

    3 infractions

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
    • 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
      • Not Critical Violation
    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  14. Inspection

    0 infractions

  15. Inspection

    0 infractions

  16. Inspection

    0 infractions

  17. Inspection

    0 infractions

  18. Inspection

    0 infractions

  19. Inspection

    0 infractions

  20. Inspection

    1 infraction

    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
  21. Inspection

    2 infractions

    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
    • 14A: Insects, rodents present
      • Not Critical Violation
  22. Inspection

    2 infractions

    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
    • 14A: Insects, rodents present
      • Not Critical Violation
  23. Inspection

    2 infractions

    • 14A: Insects, rodents present
      • Not Critical Violation
    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  24. Inspection

    3 infractions

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  25. Inspection

    2 infractions

    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
    • 12C: Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
      • Not Critical Violation
  26. Inspection

    3 infractions

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
  27. Inspection

    1 infraction

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  28. Inspection

    2 infractions

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
  29. Inspection

    0 infractions

  30. Inspection

    0 infractions

  31. Inspection

    0 infractions

  32. Inspection

    0 infractions

  33. Inspection

    4 infractions

    • 8D: Single service items reused, improperly stored, dispensed, not used when required
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  34. Inspection

    0 infractions

  35. Inspection

    0 infractions

  36. Inspection

    0 infractions

Nearby inspected facilities

Own this business? Add a badge to your website