Skip to content
Loading map…

TINKER TACO LAB

54H TINKER STREET, WOODSTOCK, NY 12498 · Restaurant (Food Service Establishment)

Inspection summary

TINKER TACO LAB has been inspected 20 times by New York State Department of Health (NYSDOH) since May 18, 2015. The most recent inspection, on September 18, 2026, found no infractions.

9 of 20 inspections on record found no infractions at all. In the past 12 months there were 3 inspections with 1 infraction recorded. The higher-risk findings here relate to: Pests, Cleaning and sanitizing and Food temperature control.

The last 2 inspections in a row found no infractions. The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • PestsHigher risk

    Signs of mice, rats, cockroaches or flies, or gaps and clutter that let them get in or hide. Pests carry bacteria and can contaminate food and surfaces, so evidence of activity is treated seriously and usually triggers a follow-up visit.

    Recorded 6 times across 6 separate inspections, most recently on September 9, 2022. For example: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 4 times across 3 separate inspections, most recently on November 21, 2025. For example: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded 3 times across 2 separate inspections, most recently on December 10, 2021. For example: Improper thawing procedures used

  • Handwashing and staff hygieneHigher risk

    Hands are the main way germs like norovirus move from people to food. Inspectors look for stocked, accessible handwashing sinks, staff washing hands when required, hair restraints, and sick employees being kept away from food. Gaps here can spread illness quickly.

    Recorded 2 times across 2 separate inspections, most recently on September 9, 2022. For example: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing

  • Chemicals and toxic substancesHigher risk

    Cleaning products, sanitizers and pesticides must be labelled and stored away from food and food-contact surfaces. Inspectors flag chemicals that could end up in food, as well as pest treatments applied without proper supervision.

    Recorded 2 times across 2 separate inspections, most recently on December 1, 2017. For example: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.

About this data

These results come from New York State Department of Health (NYSDOH), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

20 inspections

  1. Inspection

    0 infractions

  2. Inspection

    0 infractions

  3. Inspection

    1 infraction

    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
  4. Inspection

    2 infractions

    • 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
  5. Inspection

    2 infractions

    • 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
      • Not Critical Violation
    • 12E: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
      • Not Critical Violation
  6. Inspection

    2 infractions

    • 8F: Improper thawing procedures used
      • Not Critical Violation
    • 2E: Accurate thermometers not available or used to evaluate potentially hazardous food temperatures during cooking, cooling, reheating and holding.
      • Critical Violation
  7. Inspection

    0 infractions

  8. Inspection

    0 infractions

  9. Inspection

    1 infraction

    • 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
      • Not Critical Violation
  10. Inspection

    0 infractions

  11. Inspection

    0 infractions

  12. Inspection

    0 infractions

  13. Inspection

    2 infractions

    • 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  14. Re-Inspection

    1 infraction

    • 4A: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
      • Critical Violation
  15. Inspection

    4 infractions

    • 12E: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
      • Not Critical Violation
    • 4A: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
      • Critical Violation
    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
  16. Inspection

    0 infractions

  17. Inspection

    0 infractions

  18. Inspection

    1 infraction

    • 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
      • Not Critical Violation
  19. Inspection

    3 infractions

    • 14A: Insects, rodents present
      • Not Critical Violation
    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  20. Inspection

    1 infraction

    • 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
      • Not Critical Violation

Nearby inspected facilities

Own this business? Add a badge to your website