Skip to content
Loading map…

WASABI ASIAN CUISINE

556 SACKVILLE, LOWER SACKVILLE · Food Establishment

16 inspections

  1. Inspection

    1 infraction

    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Facility must clean the floor under the oil fryer regularly to avoid any food debris and oil stains on the floor.
  2. Inspection

    3 infractions

    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1.8 of the NS Food Retail and Food Services Code, you must ensure a maintenance schedule is present for the exhaust hood ventilation system. Exhaust hood ventilation system and filters require cleaning. A cleaning and maintenance schedule is required for the exhaust hood ventilation system.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Facility must clean the floor under the oil fryer regularly to avoid any food debris and oil stains on the floor.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. In accordance with Section 4.2.3 of the NS Food Retail and Food Services Code, you must: a. ensure food contact surfaces of cooking equipment are cleaned and sanitized at a frequency that prevents the accumulation of grease deposits and other residues.
  3. Inspection

    1 infraction

    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Service the mechanical dishwasher to run with 100ppm chlorine sanitizer.
  4. Inspection

    7 infractions

    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1.8 of the NS Food Retail and Food Services Code, you must ensure a maintenance schedule is present for the exhaust hood ventilation system. Exhaust hood ventilation system and filters require cleaning. A cleaning and maintenance schedule is required for the exhaust hood ventilation system.
    • 27(d) A food establishment must develop and demonstrate policies and procedures for personnel that ensure that a person entering a food handling area or engaging in an operation in a food establishment who comes into contact with food meets all of the following: (d) the person washes their hands as often as is necessary to prevent contamination of food;
      • Staff must change gloves frequently and wash hands before using a gloves. Observed a staff member attempting to put on a glove that had fallen on the floor.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Facility must mix a fresh solution of chlorine sanitizer at 100ppm daily.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Facility must clean the floor under the oil fryer regularly to avoid any food debris and oil stains on the floor.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. In accordance with Section 4.2.3 of the NS Food Retail and Food Services Code, you must: a. ensure food contact surfaces of cooking equipment are cleaned and sanitized at a frequency that prevents the accumulation of grease deposits and other residues.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Service the mechanical dishwasher to run with 100ppm chlorine sanitizer.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Provide the recent pest control report for review
  5. Inspection

    0 infractions

  6. Inspection

    1 infraction

    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1 of the NS Food Retail and Food Services Code, you must ensure all equipment is maintained and functional for its intended use. Service the glasswasher to sanitize the glassware.
  7. Inspection

    1 infraction

    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1 of the NS Food Retail and Food Services Code, you must ensure all equipment is maintained and functional for its intended use. Service the glasswasher to sanitize the glassware.
  8. Inspection

    1 infraction

    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1 of the NS Food Retail and Food Services Code, you must ensure all equipment is maintained and functional for its intended use. Service the glasswasher to sanitize the glassware.
  9. Inspection

    7 infractions

    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. Clean and sanitize the food containers used for storing flours, sugar and salts. Clean and disinfect the floor under the oil fryer.
    • 46 An operator must not sell, offer for sale, supply, prepare, process, package, display, serve, dispense or store food that is contaminated or adulterated.
      • Discarded the cut spring onions on a cutting board with blood stains. Cleaned and sanitized the cutting board. Recommended using separate cutting boards for red meats and vegetables.
    • 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator: (b) adequately designed and appropriately located hand-washing facilities;
      • Hand-washing station not be used for purposes other than handwashing
    • 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator: (b) adequately designed and appropriately located hand-washing facilities;
      • Refill the paper towel dispenser.
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must: supply adequate shelving in order that all materials may be stored off the floor; ensure shelving in food storage areas is constructed of materials which are durable and easily cleanable.
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1 of the NS Food Retail and Food Services Code, you must ensure all equipment is maintained and functional for its intended use. Service the glasswasher to sanitize the glassware.
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • In accordance with Section 4.1.8 of the NS Food Retail and Food Services Code, you must ensure a maintenance schedule is present for the exhaust hood ventilation system.
  10. Inspection

    0 infractions

  11. Inspection

    3 infractions

    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • In accordance with Section 4.3.2 of the NS Food Retail and Food Services Code, you must ensure: a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly. c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects. d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are kept in good repair. In accordance with Section 2.4.1 of the NS Food Retail and Food Services Code, you must ensure floors have coved floor-to-wall joints. In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must ensure: all shelving and food is maintained a minimum of 15 cm (6 inches) off the floor; storage areas are located in a dry, pest-free location. In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests. In accordance with Section 4.3.1 of the NS Food Retail and Food Services Code, you must immediately treat the presence of pests by inspecting and discarding any adulterated food. In accordance with Section 4.3.2 of the NS Food Retail and Food Services Code, you must: ensure pest control devices are designed and located to effectively control the presence of pests and minimize the risk of contamination to food and food surfaces; ensure pest control is carried out by a certified operator.
    • 29(1) An operator of a food establishment must have a maintenance, cleaning and sanitation program in place to control the risk of contamination of food, equipment, utensils and other facilities in the food establishment.
      • In accordance with Section 4.2.1 of the NS Food Retail and Food Services Code, you must demonstrate that a written sanitation program is in place, which: a. Outlines the parameters to be controlled in the food premises to ensure safety of the food product. b. Includes sanitation procedures for equipment, utensils or refrigeration units that impact on food safety, which must specify: i. areas, items of equipment, and utensils to be cleaned; ii. the designated food handler(s) responsible for the cleaning and sanitizing; iii. the chemicals and/or cleaning products (including concentrations) and process to be used; iv. the procedures used; v. the frequency of cleaning and sanitizing; and vi. inspection and monitoring records. c. Documents that the sanitation program is monitored and its effectiveness verified. d. Reflects the level of risk of the food products as determined by the management plan required in Section 3.0 of this Code.
  12. Inspection

    2 infractions

    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • In accordance with Section 2.3 of the NS Food Retail and Food Services Code, you must ensure walls and ceilings are kept in good repair. In accordance with Section 2.4.1 of the NS Food Retail and Food Services Code, you must ensure floors have coved floor-to-wall joints. In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must ensure: all shelving and food is maintained a minimum of 15 cm (6 inches) off the floor; storage areas are located in a dry, pest-free location. In accordance with Section 2.17 of the NS Food Retail and Food Services Code, you must ensure exterior openings are protected against the entry of pests. In accordance with Section 4.3.1 of the NS Food Retail and Food Services Code, you must immediately treat the presence of pests by inspecting and discarding any adulterated food. In accordance with Section 4.3.2 of the NS Food Retail and Food Services Code, you must: ensure pest control devices are designed and located to effectively control the presence of pests and minimize the risk of contamination to food and food surfaces; ensure pest control is carried out by a certified operator.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • In accordance with Section 4.3.2 of the NS Food Retail and Food Services Code, you must ensure: a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly. c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects. d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods.
  13. Inspection

    0 infractions

  14. Inspection

    1 infraction

    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Glasswasher with Chlorine as sanitizer must run with 100ppm concentration.
  15. Inspection

    1 infraction

    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Glasswasher with Chlorine as sanitizer must run with 100ppm concentration.
  16. Inspection

    8 infractions

    • 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator: (b) adequately designed and appropriately located hand-washing facilities;
      • A hand basin provided with: 1. hot and cold running water from a potable water supply, 2. soap in a dispenser, 3. a method of hand drying that uses single service products, such as sufficient single service towels in a dispenser, or other drying apparatus that is approved by the regulatory authority, and 4. a sign which explains proper hand washing procedures.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • Ice machines must be cleaned and sanitized.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 2.9 of the NS Food Retail and Food Services Code, you must: store all food and food items a minimum of 15 cm (6 in.) off the floor on racks, shelves or pallets; store all food and food items a minimum of 5 cm (2 in.) from the walls. In accordance with Section 3.5 of the NS Food Retail and Food Services Code, you must keep all foods covered when not in use.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • In accordance with Section 3.5 of the NS Food Retail and Food Services Code, you must keep raw foods stored separate from and below ready-to-eat foods.
    • 27(d) A food establishment must develop and demonstrate policies and procedures for personnel that ensure that a person entering a food handling area or engaging in an operation in a food establishment who comes into contact with food meets all of the following: (d) the person washes their hands as often as is necessary to prevent contamination of food;
      • In accordance with Section 5.7 of the NS Food Retail and Food Services Code, you must ensure all food handlers thoroughly wash their hands before commencing work and after any other activity or instance where hands may become soiled.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Glasswasher with Chlorine as sanitizer must run with 100ppm concentration.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • In accordance with Section 4.2.3 of the NS Food Retail and Food Services Code, you must: a. ensure food contact surfaces of cooking equipment are cleaned and sanitized at a frequency that prevents the accumulation of grease deposits and other residues.