Skip to content
Loading map…

2 4 1 Pizza

6 465 Bayly St W, Ajax ON L1S 6M7 · Food Safety Inspections

Official record from Durham Region →

Inspection summary

2 4 1 Pizza has been inspected 7 times by Durham Region Health Department since January 23, 2025. The most recent inspection, on July 15, 2026, found no infractions.

3 of 7 inspections on record found no infractions at all. In the past 12 months there were 4 inspections with 3 infractions recorded. The higher-risk findings here relate to: Cleaning and sanitizing, Handwashing and staff hygiene and Food temperature control.

The last 2 inspections in a row found no infractions. Recent inspections have recorded fewer infractions than earlier ones, so the record is improving.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 5 times across 3 separate inspections, most recently on November 3, 2025. For example: Manual dishwashing: Wash, rinse, sanitize technique

  • Handwashing and staff hygieneHigher risk

    Hands are the main way germs like norovirus move from people to food. Inspectors look for stocked, accessible handwashing sinks, staff washing hands when required, hair restraints, and sick employees being kept away from food. Gaps here can spread illness quickly.

    Recorded 2 times across 2 separate inspections, most recently on February 3, 2026. For example: Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded once on January 23, 2025. For example: Thermometers used to verify food preparation and storage temperatures

  • Chemicals and toxic substancesHigher risk

    Cleaning products, sanitizers and pesticides must be labelled and stored away from food and food-contact surfaces. Inspectors flag chemicals that could end up in food, as well as pest treatments applied without proper supervision.

    Recorded once on January 23, 2025. For example: Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)

  • Food safety training and certificationLower risk

    Most jurisdictions require a certified food handler or manager on site, and some require allergen or food-worker training. These findings mean the paperwork or the trained person was missing at the time. They do not by themselves mean food was handled unsafely.

    Recorded once on July 24, 2025. For example: Separate hand washing basin provided for food handlers

About this data

These results come from Durham Region Health Department, which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

7 inspections

  1. Routine

    0 infractions

  2. Re-Inspection

    0 infractions

  3. Routine

    1 infraction

    • Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
      • * Fail to provide hot and cold water for hand washing in food preparation area
      • Operator to ensure hand washing basins are adequately supplied
  4. Routine

    2 infractions

    • Manual dishwashing: Wash, rinse, sanitize technique
      • * Fail to ensure adequate sanitizer concentration are achieved for sanitizing
      • Chlorine sanitizer concentration must be at least 100 parts per million and not lower than 24°C for at least 45 seconds
      • Operator to provide an appropriate test reagent to verify the concentration of the sanitizer
    • Food contact surfaces washed / rinsed / sanitized after each use and following any operations when contamination may have occurred
      • * Fail to ensure sanitizing solution contains the appropriate type of chemical solution and/or concentration/strength of sanitizer
      • Operator to ensure sanitizing solution contain the appropriate type of chemical solution and/or concentration/strength for sanitizing
      • Operator to provide an appropriate test reagent to verify the concentration of the sanitizer
  5. Routine

    4 infractions

    • Separate hand washing basin provided for food handlers
      • Operator to ensure a designated hand washing basin is provided and/or accessible in each food preparation area
    • Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
      • * Fail to provide adequate supplies (single-use towels, soap in a dispenser) for the hand washing basin in the food preparation area
      • Operator to ensure hand washing basins are adequately supplied
    • Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
      • * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
      • Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
    • Manual dishwashing: Wash, rinse, sanitize technique
      • * Fail to ensure adequate sanitizer concentration are achieved for sanitizing
      • Chlorine sanitizer concentration must be at least 100 parts per million and not lower than 24°C for at least 45 seconds
      • Operator to provide an appropriate test reagent to verify the concentration of the sanitizer
  6. Re-Inspection

    0 infractions

  7. Routine

    4 infractions

    • Thermometers used to verify food preparation and storage temperatures
      • * Fail to use accurate thermometer to check storage temperature of potentially hazardous food
      • Operator to provide accurate and easily readable indicating thermometers in temperature controlled rooms/equipment used for storage of potentially hazardous foods
    • Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)
      • * Fail to use equipment/utensils/dishes/food containers/multi-service articles that are corrosion resistant/non-toxic/non-absorbent
      • Operator to ensure all food contact surfaces/equipment/utensils/multi-service articles are made of materials that are corrosion resistant/non-toxic/non-absorbent
    • Manual dishwashing: Wash, rinse, sanitize technique
      • * Fail to ensure adequate sanitizer concentration are achieved for sanitizing
      • Quaternary ammonium compound must be at least 200 parts per million and lower than 24°C or more for at least 45 seconds
    • Food contact surfaces washed / rinsed / sanitized after each use and following any operations when contamination may have occurred
      • * Fail to ensure sanitizing solution contains the appropriate type of chemical solution and/or concentration/strength of sanitizer
      • Operator to ensure sanitizing solution contain the appropriate type of chemical solution and/or concentration/strength for sanitizing

Nearby inspected facilities

Own this business? Add a badge to your website