Skip to content
Loading map…

BRAESIDE CAMP

640 EAST MAIN STREET, MIDDLETOWN, NY 10940 · Restaurant (SED Self Preparation Feeding Site)

Inspection summary

BRAESIDE CAMP has been inspected 26 times by New York State Department of Health (NYSDOH) since July 16, 2010. The most recent inspection, on July 17, 2025, found no infractions.

16 of 26 inspections on record found no infractions at all. No inspections are on record from the past 12 months. The higher-risk findings here relate to: Cleaning and sanitizing, Food temperature control and Protecting food from contamination.

The last 9 inspections in a row found no infractions. The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 9 times across 6 separate inspections, most recently on July 30, 2019. For example: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded 4 times across 4 separate inspections, most recently on July 30, 2019. For example: Improper thawing procedures used

  • Protecting food from contaminationHigher risk

    This covers how food is stored, prepared and displayed: raw meat kept away from ready-to-eat food, food covered and stored off the floor, and nothing dripping or splashing into it. Cross-contamination from raw to cooked food is a direct route for salmonella and E. coli.

    Recorded once on August 14, 2018. For example: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)

  • PestsHigher risk

    Signs of mice, rats, cockroaches or flies, or gaps and clutter that let them get in or hide. Pests carry bacteria and can contaminate food and surfaces, so evidence of activity is treated seriously and usually triggers a follow-up visit.

    Recorded once on August 15, 2016. For example: Insects, rodents present

  • Equipment and utensilsLower risk

    Equipment has to be built from cleanable materials, kept in good repair and stored properly. These findings are mostly about upkeep, like a cracked shelf, a worn gasket or utensils stored the wrong way. They are generally lower risk but show how well the kitchen is maintained.

    Recorded 4 times across 2 separate inspections, most recently on August 15, 2016. For example: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)

About this data

These results come from New York State Department of Health (NYSDOH), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

26 inspections

  1. Inspection

    0 infractions

  2. Inspection

    0 infractions

  3. Inspection

    0 infractions

  4. Inspection

    0 infractions

  5. Inspection

    0 infractions

  6. Inspection

    0 infractions

  7. Re-Inspection

    0 infractions

  8. Inspection

    0 infractions

  9. Inspection

    0 infractions

  10. Inspection

    2 infractions

    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
    • 8F: Improper thawing procedures used
      • Not Critical Violation
  11. Inspection

    1 infraction

    • 8A: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
      • Not Critical Violation
  12. Inspection

    0 infractions

  13. Inspection

    2 infractions

    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
    • 2E: Accurate thermometers not available or used to evaluate potentially hazardous food temperatures during cooking, cooling, reheating and holding.
      • Critical Violation
  14. Inspection

    5 infractions

    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
    • 14A: Insects, rodents present
      • Not Critical Violation
    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
  15. Inspection

    6 infractions

    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
    • 11B: Wiping cloths dirty, not stored properly in sanitizing solutions
      • Not Critical Violation
    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  16. Inspection

    1 infraction

    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
  17. Inspection

    0 infractions

  18. Inspection

    0 infractions

  19. Inspection

    0 infractions

  20. Inspection

    1 infraction

    • 12A: Hot, cold running water not provided, pressure inadequate
      • Not Critical Violation
  21. Inspection

    1 infraction

    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
  22. Inspection

    1 infraction

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  23. Inspection

    0 infractions

  24. Re-Inspection

    0 infractions

  25. Inspection

    0 infractions

  26. Inspection

    2 infractions

    • 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
      • Not Critical Violation
    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation

Nearby inspected facilities

Own this business? Add a badge to your website