BROOKSIDE BANQUETS, THE
2990 LOCKPORT-OLCOTT ROAD, NEWFANE, NY 14108 · Restaurant (Restaurant/Catering Operation)
Inspection summary
BROOKSIDE BANQUETS, THE has been inspected 26 times by New York State Department of Health (NYSDOH) since September 30, 2015. The most recent inspection, on February 18, 2026, found no infractions.
7 of 26 inspections on record found no infractions at all. In the past 12 months there were 3 inspections with 9 infractions recorded. The higher-risk findings here relate to: Cleaning and sanitizing, Handwashing and staff hygiene and Food temperature control.
The number of infractions per inspection has stayed roughly the same over time.
What these findings mean
Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.
Cleaning and sanitizingHigher risk
Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.
Recorded 11 times across 9 separate inspections, most recently on January 27, 2026. For example:
Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
Handwashing and staff hygieneHigher risk
Hands are the main way germs like norovirus move from people to food. Inspectors look for stocked, accessible handwashing sinks, staff washing hands when required, hair restraints, and sick employees being kept away from food. Gaps here can spread illness quickly.
Recorded 4 times across 4 separate inspections, most recently on August 23, 2024. For example:
Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
Food temperature controlHigher risk
Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.
Recorded 4 times across 3 separate inspections, most recently on August 23, 2024. For example:
Enough refrigerated storage equipment is not present, properly designed, maintained or operated so that all potentially hazardous foods are cooled properly and stored below 45�F as required.
PestsHigher risk
Signs of mice, rats, cockroaches or flies, or gaps and clutter that let them get in or hide. Pests carry bacteria and can contaminate food and surfaces, so evidence of activity is treated seriously and usually triggers a follow-up visit.
Recorded 3 times across 3 separate inspections, most recently on January 27, 2026. For example:
Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
Protecting food from contaminationHigher risk
This covers how food is stored, prepared and displayed: raw meat kept away from ready-to-eat food, food covered and stored off the floor, and nothing dripping or splashing into it. Cross-contamination from raw to cooked food is a direct route for salmonella and E. coli.
Recorded once on August 23, 2022. For example:
Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
About this data
These results come from New York State Department of Health (NYSDOH), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.
26 inspections
- Re-Inspection
0 infractions
- Inspection
6 infractions
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Not Critical Violation
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Inspection
3 infractions
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Not Critical Violation
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Inspection
2 infractions
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Re-Inspection
0 infractions
- Inspection
4 infractions
- 12D: Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Not Critical Violation
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Not Critical Violation
- 5E: Enough refrigerated storage equipment is not present, properly designed, maintained or operated so that all potentially hazardous foods are cooled properly and stored below 45�F as required.
- Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 12D: Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Inspection
2 infractions
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Re-Inspection
0 infractions
- Inspection
5 infractions
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 14B: Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Re-Inspection
0 infractions
- Inspection
1 infraction
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Inspection
5 infractions
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Not Critical Violation
- 8B: In use food dispensing utensils improperly stored
- Not Critical Violation
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Not Critical Violation
- 8A: Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Re-Inspection
0 infractions
- Inspection
1 infraction
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Inspection
2 infractions
- 8B: In use food dispensing utensils improperly stored
- Not Critical Violation
- 11D: Non food contact surfaces of equipment not clean
- Not Critical Violation
- 8B: In use food dispensing utensils improperly stored
- Inspection
0 infractions
- Inspection
2 infractions
- 12E: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Not Critical Violation
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Not Critical Violation
- 12E: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Inspection
2 infractions
- 12D: Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Not Critical Violation
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Not Critical Violation
- 12D: Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Inspection
0 infractions
- Inspection
1 infraction
- 12E: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Not Critical Violation
- 12E: Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Inspection
2 infractions
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Not Critical Violation
- 8C: Improper use and storage of clean, sanitized equipment and utensils
- Not Critical Violation
- 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Inspection
3 infractions
- 6A: Potentially hazardous foods are not kept at or above 140�F during hot holding.
- Critical Violation
- 2E: Accurate thermometers not available or used to evaluate potentially hazardous food temperatures during cooking, cooling, reheating and holding.
- Critical Violation
- 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Not Critical Violation
- 6A: Potentially hazardous foods are not kept at or above 140�F during hot holding.
- Inspection
2 infractions
- 12A: Hot, cold running water not provided, pressure inadequate
- Not Critical Violation
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Not Critical Violation
- 12A: Hot, cold running water not provided, pressure inadequate
- Inspection
2 infractions
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Not Critical Violation
- 5B: Potentially hazardous foods are not cooled by an approved method where the food temperature can be reduced from 120oF to 70oF or less within two hours and 70oF to 45oF within four hours.
- Critical Violation
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Inspection
1 infraction
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Not Critical Violation
- 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Inspection
1 infraction
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Not Critical Violation
- 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
Nearby inspected facilities
- TIM HORTONS
2897 SOUTH MAIN STREET, NEWFANE, NY 14108
16 inspections
- TIM HORTONS
2897 SOUTH MAIN STREET, NEWFANE, NY 14108
13 inspections
- MILLER HOSE COMPANY
6161 MCKEE STREET, NEWFANE, NY 14108
29 inspections
- OASIS WELLNESS AND NUTRITION
6181 STE A MCKEE STREET, NEWFANE, NY 14108
1 inspection
- MARKS PIZZERIA
6181 MC KEE STREET, NEWFANE, NY 14108
23 inspections
- NEWFANE ELEMENTARY SCHOOL
2909 TRANSIT ROAD, NEWFANE, NY 14108
51 inspections
- CAFORA'S ITALIAN KITCHEN II
2885 SOUTH MAIN STREET, NEWFANE, NY 14108
62 inspections
- SCRUPLES
2875 SOUTH MAIN STREET, NEWFANE, NY 14108
26 inspections