Skip to content
Loading map…

Champion Swimming Pool - Outdoor

16 3 Street S Champion AB T0L 0R0 · Aquatic Facility

Official record from Alberta →

Inspection summary

Champion Swimming Pool - Outdoor has been inspected 19 times by Alberta Health Services (Environmental Public Health) since May 22, 2024. The most recent inspection, on August 12, 2026, recorded 1 infraction.

None of the 19 inspections on record were free of infractions. In the past 12 months there were 4 inspections with 6 infractions recorded. The higher-risk findings here relate to: Pool and spa water quality.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their findings differently, so we group them by what they mean for the people using the facility. Higher-risk findings are the ones that could directly cause illness or injury, such as water that is not properly treated.

  • Pool and spa water qualityHigher risk

    For pools, spas and splash pads, inspectors test disinfectant levels, pH and water clarity, and check safety equipment. Water that is not properly treated can spread skin, ear and stomach infections.

    Recorded 22 times across 15 separate inspections, most recently on July 29, 2026. For example: Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?

  • Food safety training and certificationLower risk

    Many jurisdictions require trained pool operators and certified lifeguards. These findings mean required training, certification or staffing records were missing at the time of inspection.

    Recorded 19 times across 19 separate inspections, most recently on August 12, 2026. For example: Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?

  • Permits, records and postingLower risk

    Operating permits, water-test logs, posted bather rules and emergency procedures. Daily test logs are how operators show the water was checked and treated between inspections.

    Recorded 8 times across 8 separate inspections, most recently on July 31, 2025. For example: Are proper testing, monitoring, and other records being properly maintained?

About this data

These results come from Alberta Health Services (Environmental Public Health), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

19 inspections

  1. Risk Management Inspection

    1 infraction

    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • **OUTSTANDING**05/26 The facility will be sending all the plans via email to the PHI. - Plans must be completed by the end of the season. 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  2. Demand Inspection

    2 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • Water sample was not tested as the lab received the sample more than 24 hours after collection. **Please resample.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • **OUTSTANDING**05/26 The facility will be sending all the plans via email to the PHI. - Plans must be completed by the end of the season. 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  3. Demand Inspection

    2 infractions

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • 1st sample with presence of TC, need to resample
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • **OUTSTANDING**05/26 The facility will be sending all the plans via email to the PHI. - Plans must be completed by the end of the season. 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  4. Monitoring Inspection

    1 infraction

    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • **OUTSTANDING**05/26 The facility will be sending all the plans via email to the PHI. - Plans must be completed by the end of the season. 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  5. Risk Management Inspection

    3 infractions

    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • 8/12. 1) The flow rate for the pool was 215 gal/min giving a turnover of 4.2 hours. The turnover must be less than 4 hours. Increase the flow rate.2) The pH reading for the automatic controller (6.97) and manual tests (7.39) were not consistent. Recallibrate the automatic controller to ensure the readings are consistent.
    • 10. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool (Non-Critical)?
      • 8/12/2025. 1) Corrected. 2) Outstanding. 1) There was a build-up of debris on the bottom of the basin near the diving board. Please clean the basin.2) The paint on the diving board was peeling off. The diving board needs to be repainted.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 8/12/2025. OUTSTANDING**- Plans must be completed by the end of the season. 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  6. Monitoring Inspection

    4 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • 7/31. The bacterial water sample submitted on July 28th, 2025, was unsatisfactory. - HPC 280 CFU/mL. - TC absent.Treat as necessary and resample.
    • 07. Are the filtration, circulation and disinfection systems used to maintain water quality working properly (Non-Critical)?
      • 8/12. 1) The flow rate for the pool was 215 gal/min giving a turnover of 4.2 hours. The turnover must be less than 4 hours. Increase the flow rate.2) The pH reading for the automatic controller (6.97) and manual tests (7.39) were not consistent. Recallibrate the automatic controller to ensure the readings are consistent.
    • 10. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool (Non-Critical)?
      • 8/12/2025. 1) Corrected. 2) Outstanding. 1) There was a build-up of debris on the bottom of the basin near the diving board. Please clean the basin.2) The paint on the diving board was peeling off. The diving board needs to be repainted.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 8/12/2025. OUTSTANDING**- Plans must be completed by the end of the season. 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  7. Demand Inspection

    4 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • 7/31. The bacterial water sample submitted on July 28th, 2025, was unsatisfactory. - HPC 280 CFU/mL. - TC absent.Treat as necessary and resample.
    • 10. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool (Non-Critical)?
      • 1) There was a build-up of debris on the bottom of the basin near the diving board. Please clean the basin.2) The paint on the diving board was peeling off. The diving board needs to be repainted.
    • 16. Are proper testing, monitoring, and other records being properly maintained?
      • Total/combined chlorine and cyanuric acid are not being test daily.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  8. Risk Management Inspection

    3 infractions

    • 10. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool (Non-Critical)?
      • 1) There was a build-up of debris on the bottom of the basin near the diving board. Please clean the basin.2) The paint on the diving board was peeling off. The diving board needs to be repainted.
    • 16. Are proper testing, monitoring, and other records being properly maintained?
      • Total/combined chlorine and cyanuric acid are not being test daily.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  9. Demand Inspection

    4 infractions

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • 6/25. The bacterial water sample submitted on June 24th, 2025, was unsatisfactory. Treat the pool, balance water chemistry, and resample.
    • 10. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool (Non-Critical)?
      • 1) There was a build-up of debris on the bottom of the basin near the diving board. Please clean the basin.2) The paint on the diving board was peeling off. The diving board needs to be repainted.
    • 16. Are proper testing, monitoring, and other records being properly maintained?
      • Total/combined chlorine and cyanuric acid are not being test daily.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  10. Risk Management Inspection

    3 infractions

    • 10. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool (Non-Critical)?
      • 1) There was a build-up of debris on the bottom of the basin near the diving board. Please clean the basin.2) The paint on the diving board was peeling off. The diving board needs to be repainted.
    • 16. Are proper testing, monitoring, and other records being properly maintained?
      • Total/combined chlorine and cyanuric acid are not being test daily.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  11. Demand Inspection

    4 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • The bacterial water sample submitted on June 2 was unsatisfactory. - HPC was 150 CFU/mLEnsure water chemistry is balanced and treat as necessary. Resample must be submitted.
    • 10. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool (Non-Critical)?
      • 1) There was a build-up of debris on the bottom of the basin near the diving board. Please clean the basin.2) The paint on the diving board was peeling off. The diving board needs to be repainted.
    • 16. Are proper testing, monitoring, and other records being properly maintained?
      • Total/combined chlorine and cyanuric acid are not being test daily.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  12. Risk Management Inspection

    3 infractions

    • 10. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool (Non-Critical)?
      • 1) There was a build-up of debris on the bottom of the basin near the diving board. Please clean the basin.2) The paint on the diving board was peeling off. The diving board needs to be repainted.
    • 16. Are proper testing, monitoring, and other records being properly maintained?
      • Total/combined chlorine and cyanuric acid are not being test daily.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  13. Demand Inspection

    4 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • The bacteriological water sample submitted on July 29th was unsatisfactory. HPC 110CFU/mL.
    • 10. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool (Non-Critical)?
      • 1) There was a build-up of debris on the bottom of the basin near the diving board. Please clean the basin.2) The paint on the diving board was peeling off. The diving board needs to be repainted.
    • 16. Are proper testing, monitoring, and other records being properly maintained?
      • Total/combined chlorine and cyanuric acid are not being test daily.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  14. Monitoring Inspection

    3 infractions

    • 10. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool (Non-Critical)?
      • 1) There was a build-up of debris on the bottom of the basin near the diving board. Please clean the basin.2) The paint on the diving board was peeling off. The diving board needs to be repainted.
    • 16. Are proper testing, monitoring, and other records being properly maintained?
      • Total/combined chlorine and cyanuric acid are not being test daily.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 7/24. Plans in place to complete the anti-entrapment plan this week. 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  15. Demand Inspection

    2 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • The bacteriological water sample submitted on June 8th, 2024 was unsatisfactory. - HPC was 180 CFU/mL. Ensure water chemistry is balanced and resample. Treat water if necessary.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  16. Risk Management Inspection

    1 infraction

    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  17. Demand Inspection

    2 infractions

    • 02. Is the bacteriological quality of the water in this pool satisfactory (Critical)?
      • A bacteriological water sample was submitted on June 11, 2024. The sample was unsatisfactory. - Total Coliforms present. Pool must be treated and a resample submitted once water chemistry has been rebalanced.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  18. Risk Management Inspection

    1 infraction

    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.
  19. Demand Inspection

    2 infractions

    • 03. Is the bacteriological quality of the water in this pool satisfactory (Non-Critical)?
      • The bacteriological water sample that was submitted on May 17th, 2024 was unsatisfactory. - TC absent- HPC 110CFU/mLTreat, balance water chemistry, and resample.
    • 17. Does the pool have adequate written policies, plans and posted rules and safety information to ensure that the pool is operating in a safe manner?
      • 6/29. Completed anti-entrapment plan was not observed during time of the inspection. Please send completed plans to PHI by July 27th. Anti-entrapment plan submitted Monday, August 1st, 2022. Plan reviewed on August 8th, 2022. Multiple sections of the form are not completed and are missing information:Please complete the following missing information:- Pump manufacturer, make, model #, and horsepower - Pump max flow rate (also need pictures of the flow meter or calculations of how you calculated the maximum flow rate)- How will you determine the max flow rate?- Suction outlet details (make, model, etc). - Certificates of compliance for the suction outlet covers - Lifespan of the suction outlet covers (when were they installed and when do they expire?)- In the plan you selected "no" for the suction outlet covers being less than 26 inches apart. What is the exact distance between the two?- Selected that the covers are unlockable, please provide documentation confirming this. - Selected that the drains are interconnected, please provide drawings of the pool to prove this. - For the secondary anti-entrapment device you have installed what is the make, model, and type and what is the expiry?.

Nearby inspected facilities

Own this business? Add a badge to your website