Skip to content
Loading map…

CHITTENANGO BOLIVAR ROAD ELEMENTARY

6983 BOLIVAR ROAD, CHITTENANGO, NY 13037 · Restaurant (School K-12 Food Service)

Inspection summary

CHITTENANGO BOLIVAR ROAD ELEMENTARY has been inspected 63 times by New York State Department of Health (NYSDOH) since October 3, 1995. The most recent inspection, on September 23, 2026, recorded 1 infraction.

43 of 63 inspections on record found no infractions at all. In the past 12 months there were 2 inspections with 1 infraction recorded. The higher-risk findings here relate to: Cleaning and sanitizing, Food temperature control and Handwashing and staff hygiene.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 8 times across 7 separate inspections, most recently on September 23, 2026. For example: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded 5 times across 4 separate inspections, most recently on October 2, 2018. For example: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures

  • Handwashing and staff hygieneHigher risk

    Hands are the main way germs like norovirus move from people to food. Inspectors look for stocked, accessible handwashing sinks, staff washing hands when required, hair restraints, and sick employees being kept away from food. Gaps here can spread illness quickly.

    Recorded once on September 17, 2025. For example: Hair is improperly restrained

  • Equipment and utensilsLower risk

    Equipment has to be built from cleanable materials, kept in good repair and stored properly. These findings are mostly about upkeep, like a cracked shelf, a worn gasket or utensils stored the wrong way. They are generally lower risk but show how well the kitchen is maintained.

    Recorded 12 times across 11 separate inspections, most recently on March 4, 2019. For example: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces

  • Building, plumbing and upkeepLower risk

    Floors, walls and ceilings must be smooth and clean, with working lighting, ventilation, plumbing, hot and cold water, and washrooms. These are rarely an immediate food-safety risk on their own, but persistent problems can lead to pest or sanitation issues.

    Recorded 8 times across 8 separate inspections, most recently on September 25, 2019. For example: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans

About this data

These results come from New York State Department of Health (NYSDOH), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

63 inspections

  1. Inspection

    1 infraction

    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
  2. Inspection

    0 infractions

  3. Inspection

    2 infractions

    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
    • 9C: Hair is improperly restrained
      • Not Critical Violation
  4. Inspection

    1 infraction

    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
  5. Inspection

    0 infractions

  6. Inspection

    0 infractions

  7. Inspection

    0 infractions

  8. Inspection

    0 infractions

  9. Inspection

    0 infractions

  10. Inspection

    0 infractions

  11. Inspection

    0 infractions

  12. Inspection

    0 infractions

  13. Inspection

    0 infractions

  14. Inspection

    0 infractions

  15. Inspection

    1 infraction

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  16. Inspection

    2 infractions

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  17. Inspection

    4 infractions

    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
    • 6A: Potentially hazardous foods are not kept at or above 140�F during hot holding.
      • Critical Violation
    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  18. Inspection

    2 infractions

    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  19. Inspection

    2 infractions

    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
  20. Inspection

    2 infractions

    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
    • 6A: Potentially hazardous foods are not kept at or above 140�F during hot holding.
      • Critical Violation
  21. Inspection

    1 infraction

    • 12C: Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
      • Not Critical Violation
  22. Inspection

    1 infraction

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  23. Inspection

    1 infraction

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  24. Inspection

    2 infractions

    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
  25. Inspection

    0 infractions

  26. Inspection

    0 infractions

  27. Inspection

    0 infractions

  28. Inspection

    1 infraction

    • 12C: Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
      • Not Critical Violation
  29. Inspection

    0 infractions

  30. Inspection

    0 infractions

  31. Inspection

    2 infractions

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
  32. Inspection

    0 infractions

  33. Inspection

    3 infractions

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
  34. Inspection

    0 infractions

  35. Inspection

    0 infractions

  36. Inspection

    0 infractions

  37. Inspection

    0 infractions

  38. Inspection

    2 infractions

    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  39. Inspection

    0 infractions

  40. Inspection

    0 infractions

  41. Inspection

    1 infraction

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  42. Inspection

    2 infractions

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
    • 2E: Accurate thermometers not available or used to evaluate potentially hazardous food temperatures during cooking, cooling, reheating and holding.
      • Critical Violation
  43. Inspection

    1 infraction

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  44. Inspection

    0 infractions

  45. Inspection

    0 infractions

  46. Inspection

    0 infractions

  47. Inspection

    0 infractions

  48. Inspection

    0 infractions

  49. Inspection

    0 infractions

  50. Inspection

    0 infractions

  51. Inspection

    0 infractions

  52. Inspection

    0 infractions

  53. Inspection

    0 infractions

  54. Inspection

    0 infractions

  55. Inspection

    0 infractions

  56. Inspection

    0 infractions

  57. Inspection

    0 infractions

  58. Inspection

    0 infractions

  59. Inspection

    0 infractions

  60. Inspection

    0 infractions

  61. Inspection

    0 infractions

  62. Inspection

    0 infractions

  63. Inspection

    0 infractions

Nearby inspected facilities

Own this business? Add a badge to your website