Skip to content
Loading map…

Compass Group #83001 - TD Saint John Cafe

420 Rothesay Ave, Saint John NB E2J 2C4 · Food Premises

Inspection summary

Compass Group #83001 - TD Saint John Cafe has been inspected 5 times by New Brunswick Department of Health (Health Protection Branch) since February 1, 2024. The most recent inspection, on June 24, 2026, recorded 1 infraction.

1 of 5 inspections on record found no infractions at all. In the past 12 months there were 3 inspections with 5 infractions recorded. The higher-risk findings here relate to: Cleaning and sanitizing and Food temperature control.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 5 times across 4 separate inspections, most recently on June 24, 2026. For example: Mechanical Dishwashing

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded 2 times across 2 separate inspections, most recently on June 17, 2026. For example: Refrigerated Storage (Temperature)

  • Equipment and utensilsLower risk

    Equipment has to be built from cleanable materials, kept in good repair and stored properly. These findings are mostly about upkeep, like a cracked shelf, a worn gasket or utensils stored the wrong way. They are generally lower risk but show how well the kitchen is maintained.

    Recorded once on October 15, 2024. For example: Food Equipment (Design, Construction, Installation and Maintenance)

About this data

These results come from New Brunswick Department of Health (Health Protection Branch), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

5 inspections

  1. Routine Inspection

    1 infraction

    • Mechanical Dishwashing
      • If a high temperature dishwasher is used, the sanitizing water temperature shall reach 82°C (180°F).
  2. Routine Inspection

    3 infractions

    • Refrigerated Storage (Temperature)
      • Refrigeration units must be able to maintain foods at 4°C (40°F) or less.
    • Mechanical Dishwashing
      • If a high temperature dishwasher is used, the sanitizing water temperature shall reach 82°C (180°F).
    • Manual Dishwashing
      • Testing strips shall be available to verify sanitizer concentration.
  3. Routine Inspection

    1 infraction

    • Mechanical Dishwashing
      • If a high temperature dishwasher is used, the sanitizing water temperature shall reach 82°C (180°F).
  4. Routine Inspection

    3 infractions

    • Refrigerated Storage (Temperature)
      • Temperatures shall be recorded at least 2 times daily at acceptable intervals during operation and logs shall be easily accessible for review by inspectors.
    • Food Equipment (Design, Construction, Installation and Maintenance)
      • Non-food contact equipment shall be constructed from materials that are suitable for their intended purpose and are durable, easily cleaned and free from any undesirable substance.
    • Food Contact Surfaces
      • Food contact surfaces, equipment and utensils shall be maintained such that they function in the manner intended and can be easily cleaned and sanitized (e.g. scratched and scored cutting boards/utensils).
  5. Routine Inspection

    0 infractions

Nearby inspected facilities

Own this business? Add a badge to your website