Courtyard and Townplace Suites by Marriott Oshawa
1011 Bloor St E, Oshawa ON L1H 7K6 · Food Safety Inspections
8 inspections
- Routine
3 infractions
- Potentially hazardous food is held at 4°C (40°F) or lower
- * Fail to ensure potentially hazardous foods are held at 4°C (40°F) or less
- Operator to ensure potentially hazardous foods are held at 4°C (40°F) or lower
- Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)
- * Fail to maintain utensils, multi-service articles and/or food contact surfaces in a clean and sanitary manner and/or in good repair
- Operator to ensure all food contact surfaces, utensils and/or multi-service articles are cleaned and sanitized after each use and are maintained in good repair
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces as readily cleanable and non-absorbent
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Potentially hazardous food is held at 4°C (40°F) or lower
- Re-Inspection
1 infraction
- Mechanical dishwashing: Wash / rinse water clean, water temperature, timing cycles, sanitizer
- * Fail to provide sufficient detergent, chemicals, or required water temperatures for washing and sanitizing
- Hot water sanitizer must be at 82°C or greater for at least 10 seconds
- Operator to ensure the appropriate chemicals and/or temperatures are used for proper washing and sanitizing
- Mechanical dishwashing: Wash / rinse water clean, water temperature, timing cycles, sanitizer
- Routine
5 infractions
- Potentially hazardous food is held at 4°C (40°F) or lower
- * Fail to ensure potentially hazardous foods are held at 4°C (40°F) or less
- Operator to ensure potentially hazardous foods are held at 4°C (40°F) or lower
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Mechanical dishwashing: Wash / rinse water clean, water temperature, timing cycles, sanitizer
- * Fail to provide mechanical dishwasher in good repair
- * Fail to provide sufficient detergent, chemicals, or required water temperatures for washing and sanitizing
- Operator to ensure the appropriate chemicals and/or temperatures are used for proper washing and sanitizing
- Operator to ensure mechanical dishwasher is maintained in good repair
- Adequate protection against the entrance of insects, vermin, and rodents
- * Fail to prevent the entrance of insect / rodent / pest
- Operator to ensure food premise shall be protected against the entry of pest
- General housekeeping is satisfactory
- * Fail to arrange furniture, equipment and appliances as to permit thorough cleaning and the maintaining of the room or place in a clean and sanitary condition
- Operator to ensure the furniture, equipment and appliances are arranged to permit thorough cleaning and the maintaining of the room or place in a clean and sanitary condition
- Potentially hazardous food is held at 4°C (40°F) or lower
- Routine
2 infractions
- Potentially hazardous food is held at 4°C (40°F) or lower
- * Fail to ensure potentially hazardous foods are held at 4°C (40°F) or less
- Potentially hazardous foods observed at an internal temperature above 4° C (40°F)
- Operator to conduct internal temperature checks of potentially hazardous foods
- Operator to ensure potentially hazardous foods are held at 4°C (40°F) or lower
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to adjust or repair the malfunctioning cooler immediately. Do not store any potentially hazardous foods in the malfunctioning unit until it is able to maintain hazardous foods at 4° C or lower
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Potentially hazardous food is held at 4°C (40°F) or lower
- Routine
0 infractions
- Routine
2 infractions
- Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
- * Fail to provide adequate supplies (single-use towels, soap in a dispenser) for the hand washing basin in the food preparation area
- Operator to ensure hand washing basins are adequately supplied
- Mechanical dishwashing: Wash / rinse water clean, water temperature, timing cycles, sanitizer
- * Fail to provide sufficient detergent, chemicals, or required water temperatures for washing and sanitizing
- Hot water sanitizer must be at 82°C or greater for at least 10 seconds
- Operator to ensure utensils are manually sanitized after each mechanical wash cycle
- Operator to ensure the appropriate chemicals and/or temperatures are used for proper washing and sanitizing
- Hand washing basin with supplies of hot and cold water, soap in a dispenser and single-use towels
- Routine
1 infraction
- Mechanical dishwashing: Wash / rinse water clean, water temperature, timing cycles, sanitizer
- * Fail to ensure adequate sanitizer concentration are achieved for sanitizing
- Iodine concentration must be at least 25 parts per million at 24°C or greater for at least 45 seconds
- Mechanical dishwashing: Wash / rinse water clean, water temperature, timing cycles, sanitizer
- Routine
2 infractions
- Food protected from potential contamination and/or adulteration
- * Observed scoops/utensils not being stored in a sanitary manner to prevent contamination and/or adulteration
- Operator to ensure scoops/utensils are stored and maintained in a sanitary manner to prevent contamination and/or adulteration
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces as readily cleanable and non-absorbent
- Operator to ensure that all equipment/non-food contact surfaces are readily cleanable/non-absorbent and of sound and tight construction.
- Food protected from potential contamination and/or adulteration