Eastcup Roastary
1936 ROBIE, HALIFAX · Food Establishment
3 inspections
- Inspection
0 infractions
- Inspection
5 infractions
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- In accordance with Section 4.6 of the NS Food Retail and Food Services Code, you must ensure all surfaces such as floors, walls and ceilings are cleaned at a frequency that will prevent accumulation of dust, dirt and debris. Cleaning required around perimeter of kitchen, under three compartment sink, around hot water tank and in coffee roasting area.
- 23(2)(a) Equipment used to cook, heat-treat, cool, store, display or freeze food must be designed to
(a) achieve the required food temperature as rapidly as is necessary to maintain food safety; and
- Ensure display cooler housing sandwiches is repaired to hold foods at 4 degrees Celsius or lower. Cooler fluctuating in temperature from 4 degrees Celsius to 8 degrees Celsius while on-site. Potentially hazardous foods must be stored in a working cooler until repairs are made.
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;
- Ensure faucet at three compartment sink is repaired to allow adequate flow of hot/cold water.
- 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(a) the food establishment and equipment are maintained, cleaned and sanitized;
- In accordance with Section 4.2.2 of the NS Food Retail and Food Services Code, you must ensure non-food contact surfaces of equipment must be cleaned at a frequency that will prevent the accumulation of dust, dirt, food residue and other debris. Ensure ice machine is cleaned/sanitized. Ice discarded.
- 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done:
(b) insects, rodents and other pests are controlled;
- In accordance with Section 4.3.4 of the NS Food Retail and Food Services Code, you must ensure: a. Pest control devices that are used are designed and located to effectively control the presence of pests in a food premises. b. Insect control devices that are used to electrocute flying insects are located at least 2 metres (6 feet) away from any food handling area. Ensure these devices are equipped with an escape resistant trap, and are emptied and cleaned regularly. c. Insect control devices used that are designed to trap insects by adhesive or devices that may expel the insects or insect fragments are installed so that the dead insects or insect fragments cannot fall onto exposed food or equipment. Ensure insect traps (sticky tapes or similar devices) are changed regularly or when loaded with insects. d. Eradication of uncontrolled pests is carried out by a certified pest control operator utilizing approved chemicals and methods. Ensure fly trap is placed away from food preparation areas.
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- Inspection
1 infraction
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;
- Observed an accumulation of whole beans and grounds on the floor in the back area. Clean floor.
- 19(1)(c) A food establishment must be located, designed, constructed and maintained to ensure all of the following:
(c) that the surfaces and materials are durable, non-toxic and are easy to maintain, clean and sanitize;