NAIJA JOLLOF
#102-280 Lester St, Waterloo ON N2L 3W5 · Facility
13 inspections
- Re-inspection
2 infractions
- Hand washing basin with supplies of soap and paper towels in dispensers
- Provide paper towels in a dispenser at hand basin in food preparation area
- Provide soap in a dispenser at hand basin in the food preparation area
- Maintain hand washing stations with adequate supplies
- Equipment, utensils, multi-service articles and all food contact surfaces are properly constructed and maintained
- Ensure equipment, utensils and or multi-service articles in good repair
- Ensure food contact equipment and utensils are free from cracks, crevices and open seams
- Hand washing basin with supplies of soap and paper towels in dispensers
- Compliance Inspection
12 infractions
- Food protected from contamination or adulteration
- Cover all food in storage
- Store food off the floor to prevent contamination
- Food processed in a safe manner
- Cool hazardous food from 60°C (140°F) to 20°C (68°F) within 2 hours
- Cool hazardous food from 20°C (68°F) to 4°C (40°F) within 4 hours
- Food is held at 4°C (40°F) or less
- Provide adequate refrigerated space for hazardous food storage
- Thaw all hazardous foods maintaining a temperature of 4°C (40°F) or less
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Preheat the hot holding unit to at least 60°C (140°F) before placing hot foods inside of the hot holding unit
- Multi-service articles and food contact surfaces cleaned and sanitized after each use and following operations where contamination may have occurred
- Clean and sanitize food contact surfaces or equipment as often as necessary
- Floors, walls, and ceilings clean and in good repair and maintained in a sanitary manner
- Ensure floors are kept clean and in good repair
- Ensure walls are kept clean and in good repair
- Separate hand washing basin provided for food handlers
- Hand washing basin with supplies of soap and paper towels in dispensers
- Provide soap in a dispenser at hand basin in the food preparation area
- Furniture, equipment and appliances in food handling and storage rooms arranged and constructed to permit a clean and sanitary environment
- Maintain and arrange equipment to permit a clean and sanitary condition
- Maintain and arrange appliances to permit a clean and sanitary condition
- Illumination maintained in food premise as prescribed in Ontario Regulation 332/12 (Building Code)
- Fail to provide required illumination during all hours of operation
- Food handlers who come into contact with food/utensils do so in a sanitary manner
- Ensure food handlers wash hands as often as necessary
- Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
- Maintain ventilation system to ensure elimination of odours, fumes, vapours, smoke, or excessive heat
- Ensure mechanical ventilation operable
- Food protected from contamination or adulteration
- Re-inspection
3 infractions
- Food processed in a safe manner
- Process food in a manner to ensure it is safe to eat
- Cool hazardous food from 60°C (140°F) to 20°C (68°F) within 2 hours
- Cool hazardous food from 20°C (68°F) to 4°C (40°F) within 4 hours
- Ensure hazardous foods do not remain in the temperature range of 4C to 60C for more than 2 hours during handling, preparation or service
- Illumination maintained in food premise as prescribed in Ontario Regulation 332/12 (Building Code)
- Fail to provide required illumination during all hours of operation
- Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
- Maintain ventilation system to ensure elimination of odours, fumes, vapours, smoke, or excessive heat
- Maintain ventilation system in manner not permitting health hazard
- Ensure mechanical ventilation operable
- Food processed in a safe manner
- Compliance Inspection
11 infractions
- Food protected from contamination or adulteration
- Protect food from contamination and adulteration
- Store food off the floor to prevent contamination
- Food processed in a safe manner
- Process food in a manner to ensure it is safe to eat
- Cool hazardous food from 60°C (140°F) to 20°C (68°F) within 2 hours
- Cool hazardous food from 20°C (68°F) to 4°C (40°F) within 4 hours
- Ensure hazardous foods do not remain in the temperature range of 4C to 60C for more than 2 hours during handling, preparation or service
- Food is held at 4°C (40°F) or less
- Thaw all hazardous foods maintaining a temperature of 4°C (40°F) or less
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
- Preheat the hot holding unit to at least 60°C (140°F) before placing hot foods inside of the hot holding unit
- Separate hand washing basin provided for food handlers
- Hand washing station must be used only for hand washing of employees
- Ensure hand washing basin is unobstructed and accessible for hand washing
- Provide adequate number of hand washing stations
- Hand washing stations must be conveniently accessible by food handlers
- Hand washing basin with supplies of soap and paper towels in dispensers
- Provide paper towels in a dispenser at hand basin in food preparation area
- Provide soap in a dispenser at hand basin in the food preparation area
- Maintain hand washing stations with adequate supplies
- Illumination maintained in food premise as prescribed in Ontario Regulation 332/12 (Building Code)
- Fail to provide required illumination during all hours of operation
- Certified food handler present in the food service premise
- Ensure a food handler or supervisor, who is a certified food handler, is present during all hours of operation
- Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
- Maintain ventilation system to ensure elimination of odours, fumes, vapours, smoke, or excessive heat
- Food handlers who come into contact with food/utensils do so in a sanitary manner
- Ensure food handlers wash hands as often as necessary
- Cloths and towels maintained in clean, good repair and not used for other purposes
- Provide sanitizing solution for wiping cloths/rinsing large utensils/rinsing food contact surfaces
- Food protected from contamination or adulteration
- Re-inspection
1 infraction
- Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
- Maintain ventilation system to ensure elimination of odours, fumes, vapours, smoke, or excessive heat
- Maintain ventilation system in manner not permitting health hazard
- Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
- Re-inspection
2 infractions
- Manual dishwashing: Wash, rinse, sanitize technique
- Ensure wash / rinse water is at 43°C or greater
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
- Preheat the hot holding unit to at least 60°C (140°F) before placing hot foods inside of the hot holding unit
- Manual dishwashing: Wash, rinse, sanitize technique
- Re-inspection
4 infractions
- Manual dishwashing: Wash, rinse, sanitize technique
- Ensure wash / rinse water is at 43°C or greater
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
- Preheat the hot holding unit to at least 60°C (140°F) before placing hot foods inside of the hot holding unit
- Separate hand washing basin provided for food handlers
- Provide hand washing basin in a convenient location in the food preparation area
- Provide hand washing basin in food preparation area
- Ensure hand washing basin is unobstructed and accessible for hand washing
- Provide adequate number of hand washing stations
- Hand washing stations must be conveniently accessible by food handlers
- Food premise is protected against the entry and harbouring of pests
- Protect against entry, harbouring and breeding of pests
- Manual dishwashing: Wash, rinse, sanitize technique
- Compliance Inspection
12 infractions
- Food protected from contamination or adulteration
- Protect food from contamination and adulteration
- Cover all food in storage
- Food is held at 4°C (40°F) or less
- Ensure all hazardous foods are stored at 4°C (40°F) or less
- Manual dishwashing: Wash, rinse, sanitize technique
- Ensure wash / rinse water is at 43°C or greater
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
- All food product is supplied by an inspected facility (Federal, Provincial, or Municipal)
- Ensure all food product is supplied from an inspected facility (Federal, Provincial, Municipal)
- Refrigeration and hot-holding equipment maintained
- Provide hot holding equipment space of sufficient size
- Maintenance of sanitary facilities
- Equip sanitary facility with single service towels or air dryer
- Separate hand washing basin provided for food handlers
- Provide hand washing basin in a convenient location in the food preparation area
- Provide hand washing basin in food preparation area
- Ensure hand washing basin is unobstructed and accessible for hand washing
- Provide adequate number of hand washing stations
- Hand washing stations must be conveniently accessible by food handlers
- Certified food handler present in the food service premise
- Ensure a food handler or supervisor, who is a certified food handler, is present during all hours of operation
- Food handlers who come into contact with food/utensils do so in a sanitary manner
- Ensure food handlers wash hands as often as necessary
- Food premise is protected against the entry and harbouring of pests
- Protect against entry, harbouring and breeding of pests
- Provide tightly sealed entrances and / or screened entrances to prevent the entry of insects, birds, rodents, and other pests
- Cloths and towels maintained in clean, good repair and not used for other purposes
- Provide sanitizing solution for wiping cloths/rinsing large utensils/rinsing food contact surfaces
- Food protected from contamination or adulteration
- Re-inspection
1 infraction
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Compliance Inspection
3 infractions
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
- Preheat the hot holding unit to at least 60°C (140°F) before placing hot foods inside of the hot holding unit
- Refrigeration and hot-holding equipment maintained
- Provide hot holding equipment space of sufficient size
- Cloths and towels maintained in clean, good repair and not used for other purposes
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Re-inspection
3 infractions
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
- Preheat the hot holding unit to at least 60°C (140°F) before placing hot foods inside of the hot holding unit
- Refrigeration and hot-holding equipment maintained
- Provide hot holding equipment space of sufficient size
- Separate hand washing basin provided for food handlers
- Provide hand washing basin in a convenient location in the food preparation area
- Provide hand washing basin in food preparation area
- Ensure hand washing basin is unobstructed and accessible for hand washing
- Provide adequate number of hand washing stations
- Hand washing stations must be conveniently accessible by food handlers
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Compliance Inspection
6 infractions
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
- Refrigeration and hot-holding equipment maintained
- Provide hot holding equipment space of sufficient size
- Provide easily readable thermometer in refrigeration or hot-holding equipment
- Results of any inspection conducted by a public health inspector are posted in accordance with the inspector's request
- Post Check It! We Inspect it. disclosure sign in a location visible by patrons.
- Separate hand washing basin provided for food handlers
- Provide hand washing basin in food preparation area
- Provide adequate number of hand washing stations
- Hand washing stations must be conveniently accessible by food handlers
- Equipment, utensils, multi-service articles and all food contact surfaces are properly constructed and maintained
- Ensure equipment, utensils and or multi-service articles in good repair
- Ensure equipment, utensils and or multi-service articles are cleaned and sanitized
- Ensure equipment, utensils, and multi-service articles are suitable for intended purposes (food-grade)
- Ensure ventilation system/exhaust hood/filters/canopy is maintained in a clean and sanitary manner
- Food handlers who come into contact with food/utensils do so in a sanitary manner
- Ensure food handlers wash hands as often as necessary
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Compliance Inspection
6 infractions
- Food protected from contamination or adulteration
- Store food off the floor to prevent contamination
- Handle raw foods separate from ready-to-eat foods, on separate preparation surfaces, and with separate utensils to prevent contamination
- Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
- Preheat the hot holding unit to at least 60°C (140°F) before placing hot foods inside of the hot holding unit
- Results of any inspection conducted by a public health inspector are posted in accordance with the inspector's request
- Post Check It! We Inspect it. disclosure sign in a location visible by patrons.
- Separate hand washing basin provided for food handlers
- Food premise is protected against the entry and harbouring of pests
- Provide tightly sealed entrances and / or screened entrances to prevent the entry of insects, birds, rodents, and other pests
- Cloths and towels maintained in clean, good repair and not used for other purposes
- Change sanitizing solution for wiping cloths at a minimum of every 2 hours, or as often as necessary, to maintain the solution clean and sanitary at all times
- Ensure wiping cloths are kept in a sanitizing solution when not in use
- Provide sanitizing solution for wiping cloths/rinsing large utensils/rinsing food contact surfaces
- Food protected from contamination or adulteration