Skip to content
Loading map…

RANI CHETTINAD THE INDIAN KITCHEN

#19-170 UNIVERSITY Ave. W, Waterloo ON N2L 3E9 · Facility

Inspection summary

RANI CHETTINAD THE INDIAN KITCHEN has been inspected 9 times by Region of Waterloo Public Health since October 16, 2024. The most recent inspection, on May 29, 2026, recorded 5 infractions.

None of the 9 inspections on record were free of infractions. In the past 12 months there were 5 inspections with 23 infractions recorded. The higher-risk findings here relate to: Protecting food from contamination, Cleaning and sanitizing and Food temperature control.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their findings differently, so we group them by what they mean for your health. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Protecting food from contaminationHigher risk

    This covers how food and supplies are stored and handled: kept covered, off the floor, and away from anything that could contaminate them. Where food is served, raw meat must be kept away from ready-to-eat food, a direct route for salmonella and E. coli.

    Recorded 10 times across 7 separate inspections, most recently on May 29, 2026. For example: Food protected from contamination or adulteration

  • Cleaning and sanitizingHigher risk

    Surfaces, dishes and tools that touch food or people must be cleaned and then sanitized or disinfected. Inspectors check sanitizer strength, dishwasher temperatures and how cleaning is done. Poor sanitizing lets germs survive from one use to the next.

    Recorded 7 times across 5 separate inspections, most recently on May 29, 2026. For example: Equipment, utensils, multi-service articles and all food contact surfaces are properly constructed and maintained

  • Food temperature controlHigher risk

    Inspectors check that anything that has to be kept at a set temperature, such as chilled or hot food, or equipment like sterilizers, stays in its safe range and that accurate thermometers are on hand. With food, temperature problems are one of the most common causes of food poisoning.

    Recorded 3 times across 3 separate inspections, most recently on May 29, 2026. For example: Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating

  • PestsHigher risk

    Signs of mice, rats, cockroaches or flies, or gaps and clutter that let them get in or hide. Pests carry bacteria and can contaminate food, supplies and surfaces, so evidence of activity is treated seriously and usually triggers a follow-up visit.

    Recorded 3 times across 3 separate inspections, most recently on October 21, 2025. For example: Food premise is protected against the entry and harbouring of pests

  • Handwashing and staff hygieneHigher risk

    Hands are one of the main ways germs spread, from person to person and onto food and surfaces. Inspectors look for stocked, accessible handwashing sinks, staff washing their hands when required, and sick staff being kept away from work where it matters. Gaps here can spread illness quickly.

    Recorded once on February 24, 2025. For example: Hand washing basin with supplies of soap and paper towels in dispensers

About this data

These results come from Region of Waterloo Public Health, which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

9 inspections

  1. Compliance Inspection

    5 infractions

    • Food protected from contamination or adulteration
      • Protect food from contamination and adulteration
      • Cover all food in storage
    • Hot holding: minimum of 60°C (140°F) after cooking / rapid re-heating
      • Ensure food is held above 60°C (140°F) after cooking / rapid re-heating
      • Preheat the hot holding unit to at least 60°C (140°F) before placing hot foods inside of the hot holding unit
    • Separate hand washing basin provided for food handlers
      • Hand washing station must be used only for hand washing of employees
      • Ensure hand washing basin is unobstructed and accessible for hand washing
    • Equipment, utensils, multi-service articles and all food contact surfaces are properly constructed and maintained
      • Ensure equipment, utensils and or multi-service articles are cleaned and sanitized
    • Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
      • Ventilation system requires thorough cleaning
  2. Compliance Inspection

    6 infractions

    • Food protected from contamination or adulteration
      • Protect food from contamination and adulteration
      • Cover all food in storage
    • Food is held at 4°C (40°F) or less
      • Ensure all hazardous foods are stored at 4°C (40°F) or less
    • Equipment, utensils, multi-service articles and all food contact surfaces are properly constructed and maintained
      • Ensure equipment, utensils and or multi-service articles are cleaned and sanitized
    • Furniture, equipment and appliances in food handling and storage rooms arranged and constructed to permit a clean and sanitary environment
      • Maintain and arrange furniture to permit a clean and sanitary condition
      • Remove all materials not associated with the daily operation of the premises (s.7)
    • Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
      • Ventilation system requires thorough cleaning
    • Cloths and towels maintained in clean, good repair and not used for other purposes
      • Change sanitizing solution for wiping cloths at a minimum of every 2 hours, or as often as necessary, to maintain the solution clean and sanitary at all times
      • Provide sanitizing solution for wiping cloths/rinsing large utensils/rinsing food contact surfaces
  3. Complaint Inspection

    2 infractions

    • Food protected from contamination or adulteration
      • Cover all food in storage
    • Certified food handler present in the food service premise
      • Ensure a food handler or supervisor, who is a certified food handler, is present during all hours of operation
  4. Re-inspection

    2 infractions

    • Furniture, equipment and appliances in food handling and storage rooms arranged and constructed to permit a clean and sanitary environment
      • Maintain and arrange furniture to permit a clean and sanitary condition
    • Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
  5. Compliance Inspection

    8 infractions

    • Food protected from contamination or adulteration
      • Protect food from contamination and adulteration
      • Cover all food in storage
    • Testing reagent used to determine concentration of sanitizer
    • Floors, walls, and ceilings clean and in good repair and maintained in a sanitary manner
      • Ensure ceilings are kept clean and in good repair
      • Ensure floors, walls, and ceilings are tight, smooth, and non-absorbent
    • Equipment, utensils, multi-service articles and all food contact surfaces are properly constructed and maintained
      • Ensure equipment, utensils and or multi-service articles are of sound and tight construction
      • Ensure equipment, utensils and or multi-service articles in good repair
      • Ensure equipment, utensils and or multi-service articles are cleaned and sanitized
    • Furniture, equipment and appliances in food handling and storage rooms arranged and constructed to permit a clean and sanitary environment
      • Maintain and arrange furniture to permit a clean and sanitary condition
    • Certified food handler present in the food service premise
      • Ensure a food handler or supervisor, who is a certified food handler, is present during all hours of operation
    • Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
      • Ventilation system requires thorough cleaning
    • Food premise is protected against the entry and harbouring of pests
      • Protect against entry, harbouring and breeding of pests
      • Contact licensed pest control operator for insect / rodent / pest treatment and control
  6. Compliance Inspection

    7 infractions

    • Food protected from contamination or adulteration
      • Protect food from contamination and adulteration
      • Cover all food in storage
    • Multi-service articles and food contact surfaces cleaned and sanitized after each use and following operations where contamination may have occurred
    • Floors, walls, and ceilings clean and in good repair and maintained in a sanitary manner
      • Ensure floors are kept clean and in good repair
    • Equipment, utensils, multi-service articles and all food contact surfaces are properly constructed and maintained
      • Ensure equipment, utensils and or multi-service articles are cleaned and sanitized
    • Furniture, equipment and appliances in food handling and storage rooms arranged and constructed to permit a clean and sanitary environment
      • Maintain and arrange furniture to permit a clean and sanitary condition
    • Food premise is protected against the entry and harbouring of pests
      • Provide tightly sealed entrances and / or screened entrances to prevent the entry of insects, birds, rodents, and other pests
    • Cloths and towels maintained in clean, good repair and not used for other purposes
      • Change sanitizing solution for wiping cloths at a minimum of every 2 hours, or as often as necessary, to maintain the solution clean and sanitary at all times
  7. Re-inspection

    1 infraction

    • Floors, walls, and ceilings clean and in good repair and maintained in a sanitary manner
      • Ensure floors, walls, and ceilings are tight, smooth, and non-absorbent
  8. Compliance Inspection

    8 infractions

    • Food protected from contamination or adulteration
      • Protect food from contamination and adulteration
      • Store raw foods separate and below cooked / ready-to-eat foods
    • Food is held at 4°C (40°F) or less
      • Ensure all hazardous foods are stored at 4°C (40°F) or less
      • Thaw all hazardous foods maintaining a temperature of 4°C (40°F) or less
    • Results of any inspection conducted by a public health inspector are posted in accordance with the inspector's request
      • Post Check It! We Inspect it. disclosure sign in a location visible by patrons.
    • Floors, walls, and ceilings clean and in good repair and maintained in a sanitary manner
      • Cleaning required around, under, and behind kitchen equipment, counters, and baseboards
      • Ensure floors are kept clean and in good repair
      • Ensure floors, walls, and ceilings are tight, smooth, and non-absorbent
      • Ensure walls are kept clean and in good repair
    • Hand washing basin with supplies of soap and paper towels in dispensers
      • Provide soap in a dispenser at hand basin in the food preparation area
    • Furniture, equipment and appliances in food handling and storage rooms arranged and constructed to permit a clean and sanitary environment
      • Maintain and arrange furniture to permit a clean and sanitary condition
    • Ventilation is maintained to ensure the elimination of odours, fumes, vapours, smoke, or excessive heat
      • Ventilation system requires thorough cleaning
    • Food premise is protected against the entry and harbouring of pests
      • Protect against entry, harbouring and breeding of pests
      • Maintain records of pest control measures taken
  9. Compliance Inspection

    2 infractions

    • Equipment, utensils, multi-service articles and all food contact surfaces are properly constructed and maintained
      • Ensure equipment, utensils and or multi-service articles are cleaned and sanitized
    • Cloths and towels maintained in clean, good repair and not used for other purposes
      • Provide sanitizing solution for wiping cloths/rinsing large utensils/rinsing food contact surfaces

Nearby inspected facilities

Own this business? Add a badge to your website