Skip to content
Loading map…

SUNY Canton Cyber Cafe

34 Cornell Drive, Canton, NY 13617 · Restaurant (College Food Service)

Inspection summary

SUNY Canton Cyber Cafe has been inspected 21 times by New York State Department of Health (NYSDOH) since September 20, 2005. The most recent inspection, on February 19, 2026, recorded 3 infractions.

8 of 21 inspections on record found no infractions at all. In the past 12 months there was 1 inspection with 3 infractions recorded. The higher-risk findings here relate to: Cleaning and sanitizing, Food temperature control and Pests.

The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 4 times across 3 separate inspections, most recently on February 19, 2026. For example: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded 2 times across 2 separate inspections, most recently on February 19, 2026. For example: Enough refrigerated storage equipment is not present, properly designed, maintained or operated so that all potentially hazardous foods are cooled properly and stored below 45�F as required.

  • PestsHigher risk

    Signs of mice, rats, cockroaches or flies, or gaps and clutter that let them get in or hide. Pests carry bacteria and can contaminate food and surfaces, so evidence of activity is treated seriously and usually triggers a follow-up visit.

    Recorded once on September 27, 2018. For example: Insects, rodents present

  • Equipment and utensilsLower risk

    Equipment has to be built from cleanable materials, kept in good repair and stored properly. These findings are mostly about upkeep, like a cracked shelf, a worn gasket or utensils stored the wrong way. They are generally lower risk but show how well the kitchen is maintained.

    Recorded 10 times across 9 separate inspections, most recently on February 19, 2026. For example: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)

  • Food safety training and certificationLower risk

    Most jurisdictions require a certified food handler or manager on site, and some require allergen or food-worker training. These findings mean the paperwork or the trained person was missing at the time. They do not by themselves mean food was handled unsafely.

    Recorded once on February 23, 2024. For example: Miscellaneous, Economic Violation, Choking Poster, Training.

About this data

These results come from New York State Department of Health (NYSDOH), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

21 inspections

  1. Inspection

    3 infractions

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
    • 5E: Enough refrigerated storage equipment is not present, properly designed, maintained or operated so that all potentially hazardous foods are cooled properly and stored below 45�F as required.
      • Critical Violation
  2. Inspection

    1 infraction

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  3. Inspection

    1 infraction

    • 16: Miscellaneous, Economic Violation, Choking Poster, Training.
      • Not Critical Violation
  4. Inspection

    1 infraction

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  5. Inspection

    1 infraction

    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
  6. Inspection

    1 infraction

    • 11B: Wiping cloths dirty, not stored properly in sanitizing solutions
      • Not Critical Violation
  7. Inspection

    0 infractions

  8. Inspection

    1 infraction

    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
  9. Inspection

    2 infractions

    • 14A: Insects, rodents present
      • Not Critical Violation
    • 11D: Non food contact surfaces of equipment not clean
      • Not Critical Violation
  10. Inspection

    2 infractions

    • 11C: Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
      • Not Critical Violation
    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
  11. Inspection

    1 infraction

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
  12. Inspection

    1 infraction

    • 15A: Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
      • Not Critical Violation
  13. Inspection

    1 infraction

    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
  14. Inspection

    2 infractions

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
    • 12C: Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
      • Not Critical Violation
  15. Inspection

    0 infractions

  16. Inspection

    0 infractions

  17. Inspection

    0 infractions

  18. Inspection

    0 infractions

  19. Inspection

    0 infractions

  20. Inspection

    0 infractions

  21. Inspection

    0 infractions

Nearby inspected facilities

Own this business? Add a badge to your website