Voyageur Quest Outfitting
Algonquin Rd Powassan ON P0A1Z0 · Restaurant
4 inspections
- Re-inspection
2 infractions
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces as readily cleanable and non-absorbent
- Operator to ensure that all equipment/non-food contact surfaces are readily cleanable/non-absorbent and of sound and tight construction.
- Constant supply of potable running water adequate for the operation of the premises
- * Fail to provide premise with a source of adequate potable water under pressure
- Operator to ensure adequate potable water under pressure is always provided
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- Compliance (Required)
6 infractions
- Thermometers used to verify food preparation and storage temperatures
- * Fail to provide thermometer in temperature controlled room / equipment used to store potentially hazardous foods
- Operator to provide accurate and easily readable indicating thermometers in temperature controlled rooms/equipment used for storage of potentially hazardous foods
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are readily cleanable/non-absorbent and of sound and tight construction.
- Constant supply of potable running water adequate for the operation of the premises
- * Fail to ensure water treatment system is functioning adequately
- Operator to ensure water treatment system is functioning adequately
- Adequate protection against the entrance of insects, vermin, and rodents
- * Evidence of pests observed
- Operator to ensure food premise shall be protected against the entry of pest
- Food contact surfaces washed / rinsed / sanitized after each use and following any operations when contamination may have occurred
- * Fail to ensure food contact surfaces are cleaned & sanitized after each use or as often as necessary
- Operator to ensure all food contact surfaces are properly cleaned & sanitized
- Manual dishwashing: Wash, rinse, sanitize technique
- * Fail to use proper wash/rinse/sanitize technique
- Operator to ensure the proper wash/rinse/sanitize dishwashing technique is applied
- Thermometers used to verify food preparation and storage temperatures
- Compliance (Required)
2 infractions
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Food contact surfaces washed / rinsed / sanitized after each use and following any operations when contamination may have occurred
- * Fail to provide test reagent strips for approved sanitizer
- Operator to provide an appropriate test reagent to verify the concentration of the sanitizer
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- Compliance (Required)
3 infractions
- Thermometers used to verify food preparation and storage temperatures
- * Fail to provide easily readable thermometer
- Operator to provide accurate and easily readable indicating thermometers in temperature controlled rooms/equipment used for storage of potentially hazardous foods
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- * Fail to maintain all equipment/non-food contact surfaces are of sound and tight construction
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are readily cleanable/non-absorbent and of sound and tight construction.
- Adequate protection against the entrance of insects, vermin, and rodents
- * Fail to maintain a written record of pest control measures taken for 1 year
- Operator to ensure written records are maintained for 1 year
- Thermometers used to verify food preparation and storage temperatures