White Feather Country Store
15 Raglan Rd E, Oshawa ON L1H 0M9 · Food Safety Inspections
6 inspections
- Routine
3 infractions
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- * Fail to ensure filters in the ventilation system are maintained in a clean and sanitary manner
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Operator to ensure filters in the ventilation system are maintained in a clean and sanitary manner
- Manual dishwashing: Wash, rinse, sanitize technique
- * Fail to use proper wash/rinse/sanitize technique
- Chlorine sanitizer concentration must be at least 100 parts per million and not lower than 24°C for at least 45 seconds
- Operator to ensure the proper wash/rinse/sanitize dishwashing technique is applied
- Operator to provide an appropriate test reagent to verify the concentration of the sanitizer
- Adequate protection against the entrance of insects, vermin, and rodents
- * Fail to maintain a written record of pest control measures taken for 1 year
- * Fail to prevent the entrance of insect / rodent / pest
- Operator to ensure written records are maintained for 1 year
- Operator to ensure food premise shall be protected against the entry of pest
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- Routine
3 infractions
- Separate hand washing basin provided for food handlers
- * Fail to use basin only for hand washing of employees
- Operator to ensure designated hand washing basin is only used for hand washing
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- * Fail to ensure filters in the ventilation system are maintained in a clean and sanitary manner
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Manual dishwashing: Wash, rinse, sanitize technique
- * Fail to use proper wash/rinse/sanitize technique
- Chlorine sanitizer concentration must be at least 100 parts per million and not lower than 24°C for at least 45 seconds
- Operator to ensure the proper wash/rinse/sanitize dishwashing technique is applied
- Separate hand washing basin provided for food handlers
- Re-Inspection
0 infractions
- Routine
3 infractions
- Food is prepared in a safe manner
- * Fail to ensure food is prepared in a safe manner
- Operator to ensure potentially hazardous foods are prepared in a safe manner
- Separate hand washing basin provided for food handlers
- * Fail to use basin only for hand washing of employees
- Operator to ensure a designated hand washing basin is provided and/or accessible in each food preparation area
- Operator to ensure designated hand washing basin is only used for hand washing
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- * Fail to ensure filters in the ventilation system are maintained in a clean and sanitary manner
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Operator to ensure filters in the ventilation system are maintained in a clean and sanitary manner
- Food is prepared in a safe manner
- Routine
1 infraction
- Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)
- * Fail to provide utensils and/or multi-service food containers/multi-service articles that can be readily cleaned and sanitized
- Operator to ensure all food contact surfaces/equipment/utensils/multi-service articles are made of materials that are corrosion resistant/non-toxic/non-absorbent
- Food contact surfaces properly designed, constructed, installed, maintained, located (smooth, non-absorbent, cleanable, corrosion resistant and non-toxic)
- Routine
3 infractions
- Hot holding of potentially hazardous food: minimum of 60°C (140°F) after cooking / rapid re-heating
- * Fail to hold potentially hazardous food at 60°C (140°F) or higher after cooking / rapid re-heating
- Operator to ensure potentially hazardous foods are held at 60°C (140°F) or higher after cooking/rapid reheating
- Equipment, non-food contact surfaces and linen are maintained, designed, constructed, installed and accessible for cleaning
- * Fail to maintain all equipment/non-food contact surfaces as readily cleanable and non-absorbent
- * Fail to maintain all equipment/non-food contact surfaces are in clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are maintained clean and in good repair
- Operator to ensure that all equipment/non-food contact surfaces are readily cleanable/non-absorbent and of sound and tight construction.
- Food contact surfaces washed / rinsed / sanitized after each use and following any operations when contamination may have occurred
- * Fail to ensure sanitizing solution contains the appropriate type of chemical solution and/or concentration/strength of sanitizer
- Operator to ensure sanitizing solution contain the appropriate type of chemical solution and/or concentration/strength for sanitizing
- Hot holding of potentially hazardous food: minimum of 60°C (140°F) after cooking / rapid re-heating