Skip to content
Loading map…

D’lux Nails & Spa

5008 50 Street Beaumont AB T4X 1E6 · Personal Services

5 inspections

  1. Monitoring Inspection

    1 infraction

    • 20. Is reusable equipment disinfected properly?
      • - The operator was able to explain the correct steps in reprocessing dirty tools. **However, the operator was not following the correct manufacturer's instructions for CS20 use: The operator stated that the cleaned tools are soaked in the CS20 for 10-15 minutes instead of the required 20 minutes contact time. The operator was also using the CS20 solution passed the 14 days reuse period. Education was provided to the operator- The operator was verifying and documenting the CS20 concentrations daily- CS20 test strips were observed- CS20 solutions were not expiredRECOMMENDATION1) You can use things like timers to ensure that all staff are soaking the tools in CS20 for 20 minutes.2) The glass container for the CS20 should be mark with the date when the 14-day reuse period expires so that staff do not use the CS20 passed the 14 day mark.
  2. Monitoring Inspection

    2 infractions

    • 14. Is single-use or uncleanable equipment being used as intended (Non-Critical)?
      • Used nail files and buffers were observed at nail stations. The items were discarded during inspection. Please note that these items cannot be re-used as they cannot be cleaned and disinfected. Ensure single-use items are discarded immediately after use and not re-used.
    • 20. Is reusable equipment disinfected properly?
      • 1. There was no high-level disinfectant in the facility to disinfect semi-critical tools. An expired high-level disinfectant bottle (preempt cs20) observed in the facility was empty.2. Poured high-level disinfectant in a bowl failed testing with a high-level disinfectant test strip.3. High-level disinfectant testing log sheet was incomplete.Action items.1. Stop operations and obtain a new bottle of high-level disinfectant.2. Ensure all tools in the facility are disinfected for use before you resume operations. 3. Ensure high-level disinfectant log sheet is up to date. Poured high-level disinfectant must be tested each day re-used and discarded according to the manufacture's instructions or when testing fails.
  3. Risk Management Inspection

    0 infractions

  4. Risk Management Inspection

    0 infractions

  5. Initial Inspection

    1 infraction

    • 20. Is reusable equipment disinfected properly?
      • **The operator was using Barbicide disinfectant for disinfecting semi-critical tools (tools for manicure and pedicure). There was PreEmpt CS20 on site. The operator was directed to use CS20 for disinfecting all semi-critical tools. The procedures for disinfecting tools and for using CS20 were discussed with the operator.**There was no CS20 test strips on site.- Template for tracking CS20 concentration was provided to the operator.- Bowls for soaking client's nails prior to service are cleaned and disinfected with PreEMPT RTU disinfectant.ACTION REQUIRED:1) Purchase CS20 test strips for verifying the concentrations of CS20 during the 14 days reused period. The CS20 shall not be used passed a failed test or beyond the 14 days reuse period.2) Ensure that tools are dried before they go into the CS20. After soaking the tools in the CS20 for 20 minutes, ensure that the tools are again rinsed and dried before storage.