Skip to content
Loading map…

CHIPOTLE MEXICAN GRILL #2018

444 ROUTE 211 EAST, SUITE 2, MIDDLETOWN, NY 10940 · Restaurant (Food Service Establishment)

Inspection summary

CHIPOTLE MEXICAN GRILL #2018 has been inspected 24 times by New York State Department of Health (NYSDOH) since July 15, 2013. The most recent inspection, on September 11, 2026, found no infractions.

16 of 24 inspections on record found no infractions at all. In the past 12 months there were 2 inspections with 0 infractions recorded. The higher-risk findings here relate to: Cleaning and sanitizing and Food temperature control.

The last 2 inspections in a row found no infractions. The number of infractions per inspection has stayed roughly the same over time.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 5 times across 3 separate inspections, most recently on September 5, 2019. For example: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded 2 times across 2 separate inspections, most recently on August 19, 2022. For example: Potentially hazardous foods are not kept at or above 140�F during hot holding.

  • Equipment and utensilsLower risk

    Equipment has to be built from cleanable materials, kept in good repair and stored properly. These findings are mostly about upkeep, like a cracked shelf, a worn gasket or utensils stored the wrong way. They are generally lower risk but show how well the kitchen is maintained.

    Recorded 6 times across 4 separate inspections, most recently on September 19, 2025. For example: In use food dispensing utensils improperly stored

  • Building, plumbing and upkeepLower risk

    Floors, walls and ceilings must be smooth and clean, with working lighting, ventilation, plumbing, hot and cold water, and washrooms. These are rarely an immediate food-safety risk on their own, but persistent problems can lead to pest or sanitation issues.

    Recorded once on September 5, 2019. For example: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans

  • Food safety training and certificationLower risk

    Most jurisdictions require a certified food handler or manager on site, and some require allergen or food-worker training. These findings mean the paperwork or the trained person was missing at the time. They do not by themselves mean food was handled unsafely.

    Recorded once on August 30, 2018. For example: Miscellaneous, Economic Violation, Choking Poster, Training.

About this data

These results come from New York State Department of Health (NYSDOH), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

24 inspections

  1. Inspection

    0 infractions

  2. Inspection

    0 infractions

  3. Inspection

    1 infraction

    • 8B: In use food dispensing utensils improperly stored
      • Not Critical Violation
  4. Inspection

    0 infractions

  5. Inspection

    0 infractions

  6. Inspection

    0 infractions

  7. Inspection

    0 infractions

  8. Inspection

    0 infractions

  9. Re-Inspection

    0 infractions

  10. Inspection

    1 infraction

    • 6A: Potentially hazardous foods are not kept at or above 140�F during hot holding.
      • Critical Violation
  11. Inspection

    0 infractions

  12. Inspection

    0 infractions

  13. Inspection

    0 infractions

  14. Inspection

    0 infractions

  15. Inspection

    3 infractions

    • 12C: Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
      • Not Critical Violation
    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
    • 15B: Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
      • Not Critical Violation
  16. Inspection

    0 infractions

  17. Inspection

    1 infraction

    • 16: Miscellaneous, Economic Violation, Choking Poster, Training.
      • Not Critical Violation
  18. Inspection

    0 infractions

  19. Inspection

    2 infractions

    • 10B: Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
      • Not Critical Violation
    • 12C: Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
      • Not Critical Violation
  20. Inspection

    2 infractions

    • 12C: Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
      • Not Critical Violation
    • 8B: In use food dispensing utensils improperly stored
      • Not Critical Violation
  21. Inspection

    0 infractions

  22. Inspection

    3 infractions

    • 8E: Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
    • 11A: Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
      • Not Critical Violation
  23. Inspection

    2 infractions

    • 8C: Improper use and storage of clean, sanitized equipment and utensils
      • Not Critical Violation
    • 10A: Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
      • Not Critical Violation
  24. Inspection

    0 infractions

Nearby inspected facilities

Own this business? Add a badge to your website