Skip to content
Loading map…

Harvest Clean Eats

7001 MUMFORD, HALIFAX · Food Establishment

Inspection summary

Harvest Clean Eats has been inspected 5 times by Nova Scotia Environment and Climate Change (Food Safety Program) since March 12, 2024. The most recent inspection, on May 1, 2026, recorded 2 infractions.

None of the 5 inspections on record were free of infractions. In the past 12 months there were 3 inspections with 14 infractions recorded. The higher-risk findings here relate to: Pests, Protecting food from contamination and Cleaning and sanitizing.

Recent inspections have recorded more infractions than earlier ones, so it is worth reading the latest reports closely.

What these findings mean

Health authorities word their violations differently, so we group them by what they mean for food safety. Higher-risk findings are the ones inspectors treat as critical, because they can directly make someone sick.

  • PestsHigher risk

    Signs of mice, rats, cockroaches or flies, or gaps and clutter that let them get in or hide. Pests carry bacteria and can contaminate food and surfaces, so evidence of activity is treated seriously and usually triggers a follow-up visit.

    Recorded 6 times across 3 separate inspections, most recently on May 1, 2026. For example: 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.

  • Protecting food from contaminationHigher risk

    This covers how food is stored, prepared and displayed: raw meat kept away from ready-to-eat food, food covered and stored off the floor, and nothing dripping or splashing into it. Cross-contamination from raw to cooked food is a direct route for salmonella and E. coli.

    Recorded 4 times across 3 separate inspections, most recently on April 13, 2026. For example: 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;

  • Cleaning and sanitizingHigher risk

    Anything that touches food, such as cutting boards, dishes and utensils, must be washed, rinsed and sanitized. Inspectors check dishwasher temperatures, sanitizer strength and how wiping cloths are stored. Poor sanitizing lets bacteria survive from one use to the next.

    Recorded 4 times across 2 separate inspections, most recently on April 13, 2026. For example: 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.

  • Handwashing and staff hygieneHigher risk

    Hands are the main way germs like norovirus move from people to food. Inspectors look for stocked, accessible handwashing sinks, staff washing hands when required, hair restraints, and sick employees being kept away from food. Gaps here can spread illness quickly.

    Recorded once on April 13, 2026. For example: 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator: (b) adequately designed and appropriately located hand-washing facilities;

  • Food temperature controlHigher risk

    Bacteria multiply fastest between about 4 °C and 60 °C (40 °F to 140 °F). Inspectors check that cold food stays cold, hot food stays hot, cooked food is cooled quickly, and that staff have accurate thermometers. Temperature problems are one of the most common causes of food poisoning, so these are treated as critical findings.

    Recorded once on March 12, 2024. For example: 33(1) An operator must ensure that the temperature of food is controlled so that the food does not deteriorate or become inedible or unsafe.

About this data

These results come from Nova Scotia Environment and Climate Change (Food Safety Program), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

5 inspections

  1. Inspection

    2 infractions

    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • Install pest proof door sweeps on the dry storage room door to prevent entry of pests.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Clean and sanitize the following areas affected by rodent droppings: on the floor in the dry storage room.
  2. Inspection

    8 infractions

    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • Install pest proof door sweeps on the dry storage room door to prevent entry of pests.
    • 19(1)(e) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (e) that there is effective protection to prevent the access and sheltering of insects, rodents and other pests.
      • Provide the most recent pest control service report to the Public Health Inspector.
    • 19(2)(b) A food establishment must provide all of the following in accordance with applicable legislation or as considered acceptable by the Administrator: (b) adequately designed and appropriately located hand-washing facilities;
      • Stock paper towel on the dispenser at the front hand wash sink.
    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • Clean dishes must be stored in a sanitary manner; do not store clean dishes on top of garbage cans.
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • Resurface or replace the green cutting board observed with excessive gashes/staining located at the through window.
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • Remove liners from below the hot holding well and remove the cardboard from lining the reach-in cooler in the dry storage room; must be made of smooth, non-porous, and easily cleanable materials.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Clean and sanitize the following areas affected by rodent droppings: on the storage shelf below the middle prep table, on the shelf below the rice cooker station, the floor in the dry storage room.
    • 34 An operator must ensure that a food establishment is operated so that all food and food ingredients are processed, manufactured, handled, prepared, packaged, served, sold, offered for sale or distribution free of charge, dispensed, displayed and stored in a manner that prevents contamination and adulteration.
      • Discontinue storing in-use utensils in room temperature water. Acceptable methods of in-use utensil storage include a dipper well, a hot holding well, under refrigeration temperatures, or wiped with a sanitizer solution and then cleaned and sanitized every 4 hours.
  3. Inspection

    4 infractions

    • 23(1)(a) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (a) protect food from contamination;
      • Ice machine: provide proper storage for the ice scoop. Do not store the scoop directly in the ice
    • 23(1)(b) All equipment and utensils used to process, prepare, store, serve, sell or display food must be designed, constructed, installed and maintained to (b) allow adequate cleaning, sanitizing and maintenance.
      • Cutting boards require replacement due to heavy scoring and staining.
    • 29(2)(a) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (a) the food establishment and equipment are maintained, cleaned and sanitized;
      • Grill hood has debris buildup; hood must be cleaned.
    • 29(2)(b) A maintenance, cleaning and sanitation program must include procedures to ensure that all of the following are done: (b) insects, rodents and other pests are controlled;
      • Clean and sanitize all areas affected by mice. Dry storage requires thorough cleaning due to pest droppings observed on floors and shelving units.
  4. Inspection

    1 infraction

    • 19(1)(a) A food establishment must be located, designed, constructed and maintained to ensure all of the following: (a) that the risk of contaminating the food is minimized;
      • In accordance with Section 2.7(c) and Section 2.7(d) of the NS Food Retail and Food Services Code, you must ensure all lighting fixtures are shielded with shatter-proof coverings in areas where there is exposed food, equipment, utensils or linens. Ensure bunt out lighting blub in dry storage area is replaced.
  5. Inspection

    1 infraction

    • 33(1) An operator must ensure that the temperature of food is controlled so that the food does not deteriorate or become inedible or unsafe.
      • In accordance with Section 3.3.5 of the Nova Scotia Food Services and Food Retail Code, you must hold all hot foods at a temperature above 60 degrees Celsius. In accordance with Section 3.3.9 and Section 3.3.10 of the Nova Scotia Food Services and Food Retail Code, you must reheat all foods to an internal temperature of 74 degrees Celsius.

Nearby inspected facilities

Own this business? Add a badge to your website