Skip to content
Loading map…

Prairie Crest Hotel Red Deer - Pool Common Area

1000 - 5001 19 Street Red Deer AB T4R 3R1 · Aquatic Facility - Common Area

Official record from Alberta →

Inspection summary

Prairie Crest Hotel Red Deer - Pool Common Area has been inspected 5 times by Alberta Health Services (Environmental Public Health) since April 10, 2026. The most recent inspection, on September 17, 2026, recorded 2 infractions.

None of the 5 inspections on record were free of infractions. In the past 12 months there were 5 inspections with 10 infractions recorded. The higher-risk findings here relate to: Food temperature control and Pool and spa water quality.

Recent inspections have recorded fewer infractions than earlier ones, so the record is improving.

What these findings mean

Health authorities word their findings differently, so we group them by what they mean for the people using the facility. Higher-risk findings are the ones that could directly cause illness or injury, such as water that is not properly treated.

  • Food temperature controlHigher risk

    Inspectors check that anything that has to be kept at a set temperature, such as chilled or hot food, or equipment like sterilizers, stays in its safe range and that accurate thermometers are on hand. With food, temperature problems are one of the most common causes of food poisoning.

    Recorded 8 times across 5 separate inspections, most recently on September 17, 2026. For example: Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?

  • Pool and spa water qualityHigher risk

    For pools, spas and splash pads, inspectors test disinfectant levels, pH and water clarity, and check safety equipment. Water that is not properly treated can spread skin, ear and stomach infections.

    Recorded 2 times across 2 separate inspections, most recently on April 23, 2026. For example: Are general nuisance conditions, other than those noted in other violations, being prevented at this pool premises (Non-Critical)?

About this data

These results come from Alberta Health Services (Environmental Public Health), which inspects food premises and other public facilities in this area. We republish the authority's public disclosure data and refresh it regularly; the official record is the final word.

5 inspections

  1. Risk Management Inspection

    2 infractions

    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • 1. Areas of the walls are in disrepair such that paint is peeling and cracking in areas. Ensure:- Walls are repaired so that surfaces are smooth, impervious to moisture and easy to clean. - The area is blocked off from patrons during the exterior renovations as debris may fall off the walls. 2. The floor drain cover near the slide is broken and sharp.Please repair or replace drain cover.Plans are in place for a renovation of the pool facilities. No date provided.
    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • Debris was noted on the floor behind the water slide. It was indicated that this may be associated with ongoing exterior repairs.Ensure the debris is cleaned up and that the area behind the water slide is blocked off or otherwise protected to prevent debris from falling onto patrons.
  2. Risk Management Inspection

    1 infraction

    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • 1. Areas of the walls are in disrepair such that paint is peeling and cracking in areas. Ensure:- Walls are repaired so that surfaces are smooth, impervious to moisture and easy to clean. - The area is blocked off from patrons during the exterior renovations as debris may fall off the walls. 2. The floor drain cover near the slide is broken and sharp.Please repair or replace drain cover.Plans are in place for a renovation of the pool facilities. No date provided.
  3. Monitoring Inspection

    1 infraction

    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • 1. Areas of the walls are in disrepair such that paint is peeling and cracking in areas.Please ensure walls are repairs so that surfaces are smooth, impervious to moisture and easy to clean.2. The floor drain cover near the slide is broken and sharp.Please repair or replace drain cover.3. Areas of the floor around drains require more cleaning.Please ensure the floors are maintained in a clean manner.
  4. Risk Management Inspection

    2 infractions

    • 04. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool premises (Non-Critical)?
      • The pool testing kit was liquid based, and all bottles in use were expired. It appeared that larger bottles, expired in 2025, were being used to top up smaller bottles which were expired even longer.Please ensure all expired pool test chemicals are discarded or removed from the facility, and that the pool kit is resupplied with new, unexpired chemicals.Please ensure all pool testing chemicals are properly monitored so that expired chemicals are replaced before expiry, in accordance with manufacturer instructions, as degraded chemicals can produce inaccurate results.You may continue to use smaller bottles for ease of use; however, please ensure these bottles are properly labeled with the correct contents and relevant information from the original container.
    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • The cleansing shower was measured to dispense water at 60°C at the highest setting.Please ensure the cleansing shower is either equipped with a mixing valve, the handle is restricted, or another suitable method is implemented to limit the max shower temperature between 35–45°C to prevent possible scalding by users.
  5. Initial Inspection

    4 infractions

    • 04. Are general nuisance conditions, other than those noted in other violations, being prevented at this pool premises (Non-Critical)?
      • The pool testing kit was liquid based, and all bottles in use were expired. It appeared that larger bottles, expired in 2025, were being used to top up smaller bottles which were expired even longer.Please ensure all expired pool test chemicals are discarded or removed from the facility, and that the pool kit is resupplied with new, unexpired chemicals.Please ensure all pool testing chemicals are properly monitored so that expired chemicals are replaced before expiry, in accordance with manufacturer instructions, as degraded chemicals can produce inaccurate results.You may continue to use smaller bottles for ease of use; however, please ensure these bottles are properly labeled with the correct contents and relevant information from the original container.
    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • Tiles were cracked and loose on the pool deck.Please ensure all floors are repaired so that they form a continuous, sealed surface, free from damage.
    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • The support post between the closest pool ladder and the water slide had significant corrosion, posing a risk of contact and possible abrasion for water slide users, as this is a primary path of travel for back-to-back slide users and the walkway is narrow.Please ensure the post is resurfaced and resealed so that it does not pose a risk of scraping or abrasion.
    • 09. Is the pool premises maintained in a clean and sanitary condition, good repair and are temperatures being properly regulated?
      • The cleansing shower was measured to dispense water at 60°C at the highest setting.Please ensure the cleansing shower is either equipped with a mixing valve, the handle is restricted, or another suitable method is implemented to limit the max shower temperature between 35–45°C to prevent possible scalding by users.

Nearby inspected facilities

Own this business? Add a badge to your website